Abstract
The consumption, disposal, material and chemical compositions of rechargeable electric torch wastes (RETWs) were investigated in Ibadan, Nigeria. Twenty-five RETWs of ten models were collected and disassembled. Their battery electrodes (BEs) and printed circuit boards (PCBs) were acid digested and leached using United States Environmental Protection Agency (USEPA) method 3050B and USEPA Method 1311, respectively. The digests and extracts were analysed for total and extractable Pb, Cd, Cr and Ni using atomic absorption spectrophotometer. The US Test method (CPSC-CH-E 1002-08) was used for digestion of the plastic components. Two hundred questionnaires were distributed to users in Ibadan to determine their usage of RETs and their management when spent. The results indicated that BEs contributed the highest percentage (44 %) component, followed by plastic (38 %). Other components include metal, PCBs, glass and wire. Of the respondents, 61.9 % dispose their spent torches in dumpsites. The mean ± SD concentrations of Pb, Cd, Cr and Ni in the BEs were 500 ± 109 g/kg, 3.94 ± 6.84 mg/kg, 0.33 ± 0.88 mg/kg, 1.68 ± 0.74 mg/kg respectively; in the PCBs, they were 684 ± 42 g/kg, 13.7 ± 17.8 mg/kg, 13.5 ± 10.2 mg/kg and 193 ± 437 mg/kg; and in the plastics, they were 14.1 g/kg, 5.33 mg/kg, 17 mg/kg, and 4.67 mg/kg respectively. The extractable Pb in BE (2670 mg/L) and PCBs (235 mg/L) exceeded the Toxicity Characteristics Leaching Procedure (TCLP) limit of 5 mg/L. RETWs present potential environmental problems in the absence of effective recycling.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Frazzoli C, Orisakwe OE, Dragone R, Mantovani A (2010) Diagnostic health risk assessment of electronic waste on the general population in developing countries’ scenarios. Environ Impact Asses Rev 30:388–399
Oyuna T, Magnus B (2011) Chemical hazards associated with treatment of waste electrical and electronic equipment. Waste Manage 31(1):45–58
WHO (2006) ‘Elemental speciation in human health risk assessment’ Environmental Health Criteria 234. World Health Organization, Geneva Switzerland
Department of Toxic Substances Control (DTSC), Hazardous material laboratory (2004) Determination of regulatory elements in discarded laptops computers, LCD monitors, plasma TVs. http://www.dtsc.com. Accessed 21 Feb 2011
USEPA (1996) Method 3050B: acid digestion of sediments, sludge and soils. SW-86 test method for evaluating solid waste. Environmental Protection Agency Web. http://www.epa.gov. Accessed 27 March 2011
U.S. Environmental Protection Agency Method 1311 (1992) Toxicity Characterisation leaching procedure SW-846 Test Method for evaluating solid waste. http://www.epe.gov. Accessed 23 Jan 2011
United State Consumer Products Safety Commission Test Method CPSC-CH-E1002-08 (2009) Standard operating procedure for determining total lead (Pb) in Non-metal Children’s product. http://www.google.com. Accessed 12 Feb 2011
Robinson BH (2009) E- waste: an assessment of global production and environmental impacts. Sci Total Environ 408:183–191
Agency for Toxic Substances and Disease Registry (ATSDR) (2005) Toxicological profile for lead. U.S. Department of Health and Human Services. Public Health Service Agency for Toxic Substances and Disease Registry. Agency for Toxic Substances and Disease Registry Division of Toxicology and Environmental Medicine/Applied Toxicology Branch 600 Clifton Road NE, Mailstop F 32, Atlanta, Georgia 30333
Salhofer S, Tesar M (2011) Assessment of removal of components containing hazardous substances from small WEEE in Austria. J Hazard Mater 186:1481–1488
European Parliament and Council (2003) Directive 2002/95/EC on the restriction of the use of certain hazardous substances (RoHS) in electrical and electronic equipment. http://www.directive of European parliament.org. Accessed 3 May 2011
Piorek S (2011) Feasibility of analysis and screening of plastics for heavy metals with portable x-ray fluorescence analyser with miniature x-ray tube. Paper presented at the global plastics Environmental conference, Detriot, USA. http://www.google.com. Accessed 14 March 2011
Dimitrakakis E, Janz A, Bilitewski B, Gidarakos E (2009) Small WEEE: determining recyclables and hazardous substances in plastics. J Hazard Mater 161:913–919
Nnorom IC, Osibanjo O (2009) Toxicity characterization of waste mobile phone plastics. J Hazard Mater 161(1):183–188
Fink H, Panne U, Theisen M, Niessner R, Probst T, Lin X (2000) Determination of metal additives and bromine in recycled thermoplasts from electronic waste by TXRF analysis. Fresenius J Anal Chem 368:235–239
Morf LS, Tremp J, Gloor R, Schupisser F, Stengele M, Taverna R (2007) Metals, non-metals and PCB in electrical and electronic waste—actual levels in Switzerland. Waste Manage 27:1306–1316
John D, Ogunseitan A, Shapio A, Saphores M (2007) Leaching hazardous materials in cellular telephones. Environ Sci Technol 41(7):2572–2578
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ogundiran, M.B., Olujobi, T. & Osibanjo, O. Composition and management of rechargeable electric torch wastes in Ibadan, Nigeria. J Mater Cycles Waste Manag 16, 115–123 (2014). https://doi.org/10.1007/s10163-013-0158-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10163-013-0158-1