Abstract
In Japan, the Law for the Recycling of Specified Kinds of Home Appliances came into effect in April 2001. This law aims to introduce appropriate waste treatment and promote the efficient use of resources so that we can achieve a sound material-cycle society. The law introduces a new framework for recycling that places obligations principally on the manufacturers and retailers of home appliances. Material flow analysis of this new framework is essential for evaluation of the system and for finding any problems that may exist. We therefore analyzed the material flows in facilities that recycle electrical home appliances. The mass balances in the recycling facilities were appropriately estimated. Then the potential destinations were surveyed and analyzed, even though the legal framework does not include flows after the recycling facilities. The potential destination after the facilities varies and depends on both the economy and the related regulations. Currently, considerable amounts of recovered materials are exported and recycled. However, the sustainability of these trades is unknown. Therefore, we should keep a close eye on the situation and make sure that our recycling system is adaptable to meet any future changes.
Similar content being viewed by others
References
Tasaki T, Terazono A, Moriguchi Y (2005) Effective assessment of Japanese recycling law for electrical home appliances: four years after the full enforcement of the law. Proceedings of 2005 Institute of Electrical and Electronic Engineers (IEEE) International Symposium on Electronics and the Environment, pp 243–248
F Yoshida (2004) A sound material-cycle society (in Japanese) Chuokoron-Shinsha Tokyo 128–129
Fair Trade Commission of Japan (2001) Guidelines concerning joint activities for recycling (in Japanese). http://www.jftc.go.jp/pressrelease/01.june/01062601.pdf
Economic and Industrial Research Department, Development Bank of Japan (2001) Introduction of a home appliance recycling system – effects and prospects: progress towards utilization of recycling infrastructure. Development Bank of Japan Research Report No. 18
T Matsuto CH Jung N Tanaka (2004) ArticleTitleMaterial and heavy metal balance in a recycling facility for home electrical appliances Waste Manag 24 425–436 Occurrence Handle10.1016/j.wasman.2003.12.002 Occurrence Handle1:CAS:528:DC%2BD2cXjs1eqsbg%3D
Association for Electrical Home Appliances (AEHA) (1999) Report on development of an integrated recycling system of used home appliances. Association for Electrical Home Appliances
Ministry of Economy, Trade and Industry (2003) Press release: Announcement of recycling results by electric home appliance manufacturers. http://www.meti.go.jp/english/information/data/cResultRSKHAe.html
Baba K (2004) Accomplishment of zero emissions in the field of home appliance recycling. Proceedings of the annual conference of The Institute of Electrical Engineers of Japan (IEEJ). S-S7-3
A Terazono A Yoshida J Yang Y Moriguchi S Sakai (2004) ArticleTitleMaterial cycles in Asia: especially the recycling loop between Japan and China J Mater Cycles Waste Manag 6 82–96
A Yoshida A Terazono T Aramaki K Hanaki (2005) ArticleTitleSecondary materials transfer from Japan to China: destination analysis J Mater Cycles Waste Manag 7 8–15 Occurrence Handle10.1007/s10163-004-0120-3
Bureau of Industry and Security, US. Department of Commerce (undated) Documents relating to short supply petition regarding copper and copper alloy scrap. http://www.bis.doc.gov/defenseindustrialbaseprograms/osies/shortsupply/index.htm
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Murakami, S., Terazono, A., Abe, N. et al. Material flows of end-of-life home appliances in Japan. J Mater Cycles Waste Manag 8, 46–55 (2006). https://doi.org/10.1007/s10163-005-0143-4
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10163-005-0143-4