Abstract
This study deals with the contact erosion investigation and mechanical properties of both the un-stabilized and polyvinyl acetate (PVAc)-stabilized dispersive embankment layer. To this end, in addition to performing the specific dispersivity identification tests, i.e. pinhole and double hydrometer tests and contact erosion test for measuring the contact erosion parameters, a series of basic geotechnical tests was carried out. The microstructural changes with the aid of scanning electron microscopy (SEM) test and financial analysis were studied respectively to understand underlying mechanisms of stabilization and to estimate the economic benefits owing to PVAc addition. The results indicated that 2% PVAc content was the most effective proportion such that it decreased the dispersion potential, mass loss, and settlement of the dispersive soil by 69.6%, 70.5%, and 68.5% respectively, and at the same time, the strength of the samples increased by 107.4% only after 7 days of curing. The reaction between the polarity carboxyl hydrophilic group of PVAc and the hydroxyl group of the soil led to form the strong hydrogen bonds, and therefore, the structure stability and strength of the soil were enhanced. The formation of reticulated membrane structures and stronger bonds between soil particles, as documented by SEM images, testified to the excellent efficiency of PVAc in dispersive soil stabilization. Finally, the accuracy of available correlations between soil dispersivity and contact erosion parameters was examined, and then, the correlations were developed to cover a broad range of soils by using the results of this study.
Similar content being viewed by others
Data availability
All data, models, and code generated or used during the study appear in the submitted article.
References
ASTM D4253-14 (2014) Standard test methods for maximum index density and unit weight of soils using a vibratory table. American Society for Testing and Materials
ASTM D4254-14 (2014) Standard test methods for minimum index density and unit weight of soils and calculation of relative density. American Society for Testing and Materials
ASTM D4609-94 (1994) Standard guide for evaluating effectiveness of chemicals for soil stabilization. American Society for Testing and Materials
Bai Y, Liu J, Song Z et al (2019) Unconfined compressive properties of composite sand stabilized with organic polymers and natural fibers. Polymers (Basel) 11:1576. https://doi.org/10.3390/polym11101576
Basha EA, Hashim R, Mahmud HB, Muntohar AS (2005) Stabilization of residual soil with rice husk ash and cement. Constr Build Mater 19:448–453
Bell FG, Walker DJH (2000) A further examination of the nature of dispersive soils in Natal, South Africa. Q J Eng Geol Hydrogeol 33:187–199. https://doi.org/10.1144/qjegh.33.3.187
Bu F, Liu J, Bai Y et al (2019) Effects of the preparation conditions and reinforcement mechanism of polyvinyl acetate soil stabilizer. Polymers (Basel) 11:506. https://doi.org/10.3390/polym11030506
Firoozi AA, Guney Olgun C, Firoozi AA, Baghini MS (2017) Fundamentals of soil stabilization. Imt J Geo-Eng 8:1–16. https://doi.org/10.1186/s40703-017-0064-9
Ghasemzadeh H, Mehrpajouh A, Pishvaei M (2021) Laboratory analyses of Kaolinite stabilized by vinyl polymers with different monomer types. Eng Geol 280. https://doi.org/10.1016/j.enggeo.2020.105938
Ghorbani A, Hasanzadehshooiili H, Mohammadi M et al (2019) Effect of selected nanospheres on the mechanical strength of lime-stabilized high-plasticity clay soils. Adv Civil Eng 2019. https://doi.org/10.1155/2019/4257530
Goodarzi AR, Salimi M (2015) Effect of iron industry slags on the geotechnical properties and mineralogy characteristics of expansive clayey soils. Modares J Civil Eng 15:161–203
Huang J, Kogbara RB, Hariharan N et al (2021) A state-of-the-art review of polymers used in soil stabilization. Constr Build Mater 305:124685
Jegatheesan P, Sothilingam P, Arulrajah A et al (2015) Laboratory model test on contact erosion of dispersive soil beneath pavement layers. Geotech Test J 38:906–914. https://doi.org/10.1520/GTJ20140179
Johari A, Golkarfard H, Mesbahi M (2022) The effect of nano-clay stabilizing treatment on the real excavation wall failure: a case study. Sci Iranica 29:1006–1023. https://doi.org/10.24200/SCI.2022.56364.4690
Krishnankutty SV, Sabu K (2021) Feasibility study on dispersivity of lignosulphonate-treated clay using pinhole test. In: Lecture notes in civil engineering. Springer Science and Business Media Deutschland GmbH, pp 317–327
Masoumi E, Abtahi Forooshani SM, Abdi Nian F (2013) problematic soft soil improvement with both polypropylene fiber and polyvinyl acetate resin. Geotech Geol Eng 31:143–149. https://doi.org/10.1007/s10706-012-9575-5
Mohanty S, Roy N, Singh SP, Sihag P (2021a) Strength and durability of flyash, GGBS and cement clinker stabilized dispersive soil. Cold Reg Sci Technol 191:103358. https://doi.org/10.1016/j.coldregions.2021.103358
Mohanty S, Roy N, Singh SP, Sihag P (2021b) Effect of industrial by-products on the strength of stabilized dispersive soil. Int J Geotech Eng 15:405–417. https://doi.org/10.1080/19386362.2019.1654281
Parsaei M, Vakili AH, Salimi M et al (2021) Effect of electric arc and ladle furnace slags on the strength and swelling behavior of cement-stabilized expansive clay. Bull Eng Geol Environ 1–18
Phanikumar BR, Nagaraju TV (2018a) Engineering behaviour of expansive clays blended with cement and GGBS. Proc Institut Civil Eng Ground Improve 171:167–173. https://doi.org/10.1680/jgrim.17.00054
Phanikumar BR, Nagaraju TV (2018b) Effect of fly ash and rice husk ash on index and engineering properties of expansive clays. Geotech Geol Eng 36:3425–3436. https://doi.org/10.1007/s10706-018-0544-5
Pourakbar S, Asadi A, Huat BBK, Fasihnikoutalab MH (2015) Stabilization of clayey soil using ultrafine palm oil fuel ash (POFA) and cement. Transport Geotech 3:24–35. https://doi.org/10.1016/j.trgeo.2015.01.002
Premkumar S, Piratheepan J, Arulrajah A et al (2015) experimental study on contact erosion failure in pavement embankment with dispersive clay. J Mater Civ Eng 28:04015179. https://doi.org/10.1061/(asce)mt.1943-5533.0001452
Premkumar S, Piratheepan J, Rajeev P (2022) Contact erosion initiated by clay dispersion beneath pavement layers. Geomech Geoeng 17:524–546. https://doi.org/10.1080/17486025.2020.1827161
Quiñónez Samaniego RA, Scheuermann Filho HC, de Araújo MT et al (2021) Key parameters controlling strength and resilient modulus of a stabilised dispersive soil. Road Mater Pavement Design. https://doi.org/10.1080/14680629.2021.2013937
Rezaeimalek S, Nasouri A, Huang J et al (2017) Comparison of short-term and long-term performances for polymer-stabilized sand and clay. J Traffic Transport Eng (English Edition) 4:145–155. https://doi.org/10.1016/j.jtte.2017.01.003
Salehi D, Heidari A (2022) Embankment dam design with dispersive soil: solutions and challenges. Geotech Geol Eng 40:4289–4299. https://doi.org/10.1007/s10706-022-02153-2
Salimi M, Dordsheykhtorkamani A, Afrasiabian A, Khajeh A (2021) incorporation of volcanic ash for enhanced treatment of a cement-stabilized clayey soil. J Mater Civ Eng 33:04020465. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003571
Sihag P, Suthar M, Mohanty S (2021) Estimation of UCS-FT of Dispersive soil stabilized with fly ash, cement clinker and ggbs by artificial intelligence. Iran J Sci Technol – Transac Civil Eng 45:901–912. https://doi.org/10.1007/s40996-019-00329-0
Song Z, Liu J, Bai Y et al (2019) Laboratory and field experiments on the effect of vinyl acetate polymer-reinforced soil. Appl Sci 9:208. https://doi.org/10.3390/app9010208
Topçu S, Tosun H (2022) Determination of dispersive erosion resistance in fine-grained soils with newly developed test equipment. Geotech Test J 45:20200213. https://doi.org/10.1520/GTJ20200213
Türköz M, Umu SU, Öztürk O (2021) Effect of silica fume as a waste material for sustainable environment on the stabilization and dynamic behavior of dispersive soil. Sustainability 13:4321. https://doi.org/10.3390/su13084321
Vakili AH, Salimi M, Lu Y et al (2022) Strength and post-freeze-thaw behavior of a marl soil modified by lignosulfonate and polypropylene fiber: an environmentally friendly approach. Constr Build Mater 332:127364
Vakili AH, Salimi M, Shamsi M (2021) Application of the dynamic cone penetrometer test for determining the geotechnical characteristics of marl soils treated by lime. Heliyon 7:e08062
Vakili AH, Bin SMR, Salimi M, Gararei SG (2019) Evaluation of pozzolanic Portland cement as geotechnical stabilizer of a dispersive clay. Int J Geotech Eng 1–8
Vakili AH, Shojaei SI, Salimi M, bin Selamat MR, Farhadi MS (2020) Contact erosional behaviour of foundation of pavement embankment constructed with nanosilica-treated dispersive soils. Soils Found 60(1):167–178
Wong LS, Hashim R, Ali F (2013) Utilization of sodium bentonite to maximize the filler and pozzolanic effects of stabilized peat. Eng Geol 152:56–66. https://doi.org/10.1016/j.enggeo.2012.10.019
Zhang J, Wang Q, Wang W, Zhang X (2021) The dispersion mechanism of dispersive seasonally frozen soil in western Jilin Province. Bull Eng Geol Environ 80:5493–5503. https://doi.org/10.1007/s10064-021-02221-6
Zhang L, Du YH, Yang XJ, Fan HH (2022) Application of artificial neural network in predicting the dispersibility of soil. Iran J Sci Technol – Transac Civil Eng 46:2315–2324. https://doi.org/10.1007/s40996-021-00754-0
Zhu X, Liu J, Xue J et al (2022) Effect of curing condition on the compressive mechanical behavior of clayey soil stabilized with liquid polymer. Int J Polym Sci 2022. https://doi.org/10.1155/2022/9031369
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Vakili, A.H., Salimi, M., Keskin, I. et al. Effects of polyvinyl acetate content on contact erosion parameters of pavement embankment constructed by dispersive soils. Bull Eng Geol Environ 82, 398 (2023). https://doi.org/10.1007/s10064-023-03416-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10064-023-03416-9