Avoid common mistakes on your manuscript.
Correction to: Bulletin of Engineering Geology and the Environment (2023) 82:235 https://doi.org/10.1007/s10064-023-03259-4
The original version of this article contains an inverted names. Family name was captured first instead of the given name. Author names is corrected here.
The original article has been corrected.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Antonielli, B., Iannucci, R., Ciampi, P. et al. Correction to: Engineering‑geological modeling for supporting local seismic response studies: insights from the 3D model of the subsoil of Rieti (Italy). Bull Eng Geol Environ 82, 305 (2023). https://doi.org/10.1007/s10064-023-03345-7
Published:
DOI: https://doi.org/10.1007/s10064-023-03345-7