Skip to main content
SpringerLink
Log in

The evolution characteristics of fractures in overlying rock for underground coal fires

  • Original Paper
  • Published:
Bulletin of Engineering Geology and the Environment Aims and scope Submit manuscript

Abstract

Fractures generated in the overlying rock of coalfield fire areas can develop into air leakage and oxygen supply channels, thus helping sustain and intensify the fire. However, the formation, evolution, and distribution of such fractures are complex. This study used physical similarity simulation and numerical simulation to analyse the formation and evolution process of the underground coal field fire area at the Tanyaoqu coalmine. The first air leakage and oxygen supply channel in a coal fire area is formed when the overlying rock fractures reach the surface. The average collapse step distance of overlying rock after the formation of the first air leakage and oxygen supply channel in the research area was approximately two times that before. The length of the main fracture in the overlying rock increased gradually with coal combustion temperature. The angle between the main fracture and the horizontal plane decreased as temperature increased before the formation of the first channel and increased with temperature after the formation. When the coal combustion temperature was 600, 800, and 1000 °C, the distances from the coal seam damage position to the first air leakage and oxygen supply channel position are 122.7, 114.7, and 103.1 m, respectively.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

Data availability

Data will be made available on request.

References

  • Bieniawaski ZT (1968) The effect of specimen size on compression strength in coal. Int J Rock Mech Min 5:325–333

    Article  Google Scholar 

  • Cao DY, Fan XJ, Wu CC, Wang GL (2009) Study on the fractures related with coalfield fire area in Wuda coalfield, Inner Mongolia. J China Coal Soc 34:1009–1014 (In Chinese)

    Google Scholar 

  • Cui F, Chong J, Lai XP, Yang YB, Dong S (2020) Study on the law of fracture evolution under repeated mining of close-distance coal seams. Energies 13:6064

    Article  Google Scholar 

  • Finkelman RB (2004) Potential health impacts of burning coal beds and waste banks. Int J Coal Geol 59:19–24

    Article  Google Scholar 

  • Hettema MHH, Niepce DV, Wolf KHAA (1999) A microstructural analysis of the compaction of claystone aggregate at high temperature. Int J Rock Mech Min 36:57–68

    Article  Google Scholar 

  • Hobbs DW (1964) The strength and stress-strain characteristics of coal in triaxial compression. J Geol 72:214–231

    Article  Google Scholar 

  • Ide TS, Pollard D, Orr FM Jr (2010) Fissure formation and subsurface subsidence in a coalbed fire. Int J Rock Mech Min Sci 47(1):81–93. https://doi.org/10.1016/j.ijrmms.2009.05.007

    Article  Google Scholar 

  • Jennifer ME (2013) The effect of abundant precipitation on coal fire subsidence and its implications in Centralia, PA. Int J Coal Geol 105:110–119

    Article  Google Scholar 

  • Jiao YY, Zhang XL, Zhang HQ, Li HB, Yang SQ, Li JC (2015) A coupled thermo-mechanical discontinuum model for simulating rock cracking induced by temperature stresses. Comput Geotech 67:142–149

    Article  Google Scholar 

  • Kuenzer C, Stracher GB (2012) Geomorphology of coal seam fires. Geomorphology 138:209–222

    Article  Google Scholar 

  • Liang YC, Liang HD, Zhu SQ (2014) Mercury emission from coal seam fire at Wuda, Inner Mongolia, China. Atmos Environ 83:176–184

    Article  Google Scholar 

  • Liu XS, Tan YL, Ning JG, Lu YW, Gu QH (2018) Mechanical properties and damage constitutive model of coal in coal-rock combined body. Int J Rock Mech Min 110:140–150

    Article  Google Scholar 

  • Ma JH, Hou C, Hou JT (2021) Numerical and similarity simulation study on the protection effect of composite protective layer mining with gently inclined thick coal seam. Shock Vib 2021:1–15

    Google Scholar 

  • Miao ST, Pan PZ, Zhao XG, Shao CY, Yu PY (2021) Experimental study on damage and fracture characteristics of Beishan granite subjected to high-temperature treatment with DIC and AE techniques. Rock Mech Rock Eng 54:721–743

    Article  Google Scholar 

  • Pone JDN, Hein KAA, Stracher GB, Annegarn HJ, Finkleman RB, Blake DR, McCormack JK, Schroeder P (2007) The spontaneous combustion of coal and its by-products in the Witbank and Sasolburg coalfields of South Africa. Int J Coal Geol 72:124–140

    Article  Google Scholar 

  • Stracher GB, Taylor TP (2004) Coal fires burning out of control around the world: thermodynamic recipe for environmental catastrophe. Int J Coal Geol 59:7–17

    Article  Google Scholar 

  • Wessling S, Kuenzer C, Kessels W, Wuttke MW (2008) Numerical modeling for analyzing thermal surface anomalies induced by underground coal fires. Int J Coal Geol 74:175–184

    Article  Google Scholar 

  • Wolf KH, Bruining H (2007) Modelling the interaction between underground coal fires and their roof rocks. Fuel 86:2761–2777

    Article  Google Scholar 

  • Wu JJ, Liu XC (2011) Risk assessment of underground coal fire development at regional scale. Int J Coal Geol 86:87–94

    Article  Google Scholar 

  • Xia M (2015) Thermo-mechanical coupled particle model for rock. Trans Nonferrous Met Soc China 25:2367–2379

    Article  Google Scholar 

  • Xiao WJ, Zhang DM, Yang H, Li XM, Ye ML, Li SJ (2021) Laboratory investigation of the temperature influence on the mechanical properties and fracture crack distribution of rock under uniaxial compression test. Bull Eng Geol Env 80:1585–1598

    Article  Google Scholar 

  • Yang DM, Sarhosis V, Sheng Y (2014) Thermal–mechanical modelling around the cavities of underground coal gasification. J Energy Inst 87(4):321–329

    Article  Google Scholar 

  • Yang SQ, Chen M, Fang G, Wang YC, Meng B, Li YH, Jing HW (2018) Physical experiment and numerical modelling of tunnel excavation in slanted upper-soft and lower-hard strata. Tunn Undergr Sp Tech 82:248–264

    Article  Google Scholar 

  • Ye Q, Wang G, Jia ZZ, Zheng CS, Wang WJ (2018) Similarity simulation of mining-crack-evolution characteristics of overburden strata in deep coal mining with large dip. J Pet Sci Eng 165:477–487

    Article  Google Scholar 

  • Zhang DM, Qi XH, Yin GZ, Zheng BB (2013) Coal and rock fissure evolution and distribution characteristics of multi-seam mining. Int J Min Sci Technol 23:835–840

    Article  Google Scholar 

  • Zhang GJ, Li QS, Zhang Y, Du F (2021) Failure characteristics of roof in working face end based on stress evolution of goaf. Geomech Geophys Geol 7:53

    Article  Google Scholar 

  • Zhang JC, Li XL, Qin QZ, Wang YB, Gao X (2023) Study on overlying strata movement patterns and mechanisms in super-large mining height stopes. Bull Eng Geol Env 82:142

    Article  Google Scholar 

  • Zhou LF, Zhang DR, Wang J, Huang ZQ, Pan DL (2013) Mapping land subsidence related to underground coal fires in the Wuda Coalfield (Northern China) using a small stack of ALOS PALSAR differential interferograms. Remote Sens 5:1152–1176

    Article  Google Scholar 

  • Zhu WS, Li Y, Li SC, Wang SG, Zhang QB (2011) Quasi-three-dimensional physical model tests on a cavern complex under high in-situ stresses. Int J Rock Mech Min 48:199–209

    Article  Google Scholar 

Download references

Funding

This work was funded by the National Natural Science Foundation of China (Nos. 51974233 and 51904232).

Author information

Authors and Affiliations

  1. School of Safety Science and Engineering, Xi’an University of Science and Technology, 710054, Xi’an, Shaanxi, People’s Republic of China

    Yang Xiao, Qun Shi, Kun-Hua Liu, Qing-Wei Li & Zhen-Ping Wang

  2. Shaanxi Key Laboratory of Prevention and Control of Coal Fire, Xi’an University of Science and Technology, 710054, Xi’an, Shaanxi, People’s Republic of China

    Yang Xiao, Qing-Wei Li & Zhen-Ping Wang

Authors
  1. Yang Xiao
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Qun Shi
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Kun-Hua Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Qing-Wei Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Zhen-Ping Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

Yang Xiao: conceptualisation, methodology, supervision, and writing with review and editing. Qun Shi: experimental tests, software, and writing with original draft. Kun-Hua Liu: methodology and software. Qing-Wei Li: supervision and writing with review and editing. Zhen-Ping Wang: writing with review and editing.

Corresponding author

Correspondence to Yang Xiao.

Ethics declarations

Competing interests

The authors declare no competing interests.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Xiao, Y., Shi, Q., Liu, KH. et al. The evolution characteristics of fractures in overlying rock for underground coal fires. Bull Eng Geol Environ 82, 290 (2023). https://doi.org/10.1007/s10064-023-03321-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s10064-023-03321-1

Keywords

Search

Navigation