Abstract
Deep tunnels in soft rock with high in situ stresses always exhibit large deformations. A case study in the Muzhailing Tunnel was carried out to explore the failure mechanism and investigate the control technology of the tunnel. The numerical simulation software Universal Discrete Element Code (UDEC) was used to establish a model, the results of which were analyzed. Combined with the rock mass strength criteria of the Geological Strength Index (GSI), the parameters of the rock mass around the tunnel were evaluated, and the microparameters of the rock mass from the UDEC were calibrated. Considering the results of the original support scheme to those calculated without support, failure first occurred in the roof and floor surfaces and then developed deeper into the surrounding rock. In the end, the tunnel suffered from a large asymmetric deformation with roof subsidence, rib shrinkage, and steel arch frame bending and twisting, which could be clearly observed from the stress, displacement, and crack evolution. Considering the failure of the original support with insufficient strength and stiffness, a new support scheme with high constant resistance anchor cables was proposed to control the large deformation of the tunnel. The anchor cables have been proved to be effective with high constant resistance and large deformation by the laboratory test, numerical simulation and field test. The results showed that the new support could effectively control the deformation of the tunnel. The new support scheme transforms the large deformation and nonuniform stress distribution of the tunnel into a small deformation and uniform stress distribution, which could provide useful references for support design in deep underground engineering.
Similar content being viewed by others
References
Bai QS, Tu SH, Zhang C, Zhu DF (2016) Discrete element modeling of progressive failure in a wide coal roadway from water-rich roofs. Int J Coal Geol 167:215–229
Bizjak KF, Petkovšek B (2004) Displacement analysis of tunnel support in soft rock around a shallow highway tunnel at Golovec. Eng Geol 75(1):89–106
Brady BHG, Brown ET (2004) Rock mechanics: for underground mining. Springer Science and Business Media, New York
Cao CC, Shi CH, Lei MF, Yang WC, Liu JW (2018) Squeezing failure of tunnels: a case study. Tunn Undergr Sp Tech 77:188–203
Cunha AP (1990) Scale effects in rock mechanics Proceedings of the 1st International Workshop on Scale Effects in Rock Masses. Loen, Norway; 7-8 June, 1990:3–27
Deisman N, Gentzis T, Chalaturnyk RJ (2008) Unconventional geomechanical testing on coal for coalbed reservoir well design: The Alberta Foothills and Plains. Int J Coal Geol 75(1):15–26
Ding XL, Weng YH, Zhang YT, Xu TJ, Wang TL, Rao ZW, Qi ZF (2017) Stability of Large Parallel Tunnels Excavated in Weak Rocks: A Case Study. Rock Mech Rock Eng 50(1):1–22
Feng XD, Jimenez R (2015) Predicting tunnel squeezing with incomplete data using Bayesian networks. Eng Geol 195:214–224
Gao FQ, Stead D, Coggan J (2014a) Evaluation of coal longwall caving characteristics using an innovative UDEC Trigon approach. Comput Geotech 55:448–460
Gao FQ, Stead D, Kang HP, Wu YZ (2014b) Discrete element modelling of deformation and damage of a roadway driven along an unstable goaf —A case study. Int J Coal Geol 127:100–110
Gao FQ, Stead D, Kang HP (2015) Numerical simulation of squeezing failure in a coal mine roadway due to mining-induced stresses. Rock Mech Rock Eng 48(4):1635–1645
He MC (2011) Physical modeling of an underground roadway excavation in geologically 45° inclined rock using infrared thermography. Eng Geol 121(3-4):165–176
He MC, Guo ZB (2014) Mechanical property and engineering application of anchor bolt with constant resistance and large deformation. Chin J Rock Mech Eng 33(7):1297–1308 (In Chinese)
He MC, Xia HM, Jia XN, Gong WL, Zhao F, Liang KY (2012) Studies on classification, criteria, and control of rockbursts. J Rock Mech Geotech Eng 4(2):97–114
He MC, Gong WL, Wang J, Qi P, Tao ZG, Du S, Peng YY (2014) Development of a novel energy-absorbing bolt with extraordinarily large elongation and constant resistance. Int J Rock Mech Min 67(1):29–42
He P, Li SC, Li LP, Zhang QQ, Xu F, Chen YJ (2017a) Discontinuous deformation analysis of super section tunnel surrounding rock stability based on joint distribution simulation. Comput Geotech 91:218–229
He SD, Li YR, Aydin A (2017b) A comparative study of UDEC simulations of an unsupported rock tunnel. Tunn Undergr Sp Tech 72:242–249
Hoek E, Brown ET (1997) Practical estimates of rock mass strength. Int J Rock Mech Min 34(8):1165–1186
Hoek E, Diederichs MS (2006) Empirical estimation of rock mass modulus. Int J Rock Mech Min 43(2):203–215
Hoek E, Guevara R (2009) Overcoming squeezing in the Yacambú-Quibor Tunnel, Venezuela. Rock Mech Rock Eng 42(2):389–418
Hoek E, Marinos P (2000) Predicting tunnel squeezing problems in weak heterogeneous rock masses. Tunn Tunn 32(11):45–51
Hoek E, Carranza-Torres CT, Corkum B (2002) Hoek–Brown Failure Criterion–2002 Edition. Toronto, Canada, Proceedings of the Fifth north American Rock Mechanics Symposium
Itasca (2014) UDEC-Universal Distinct Element Code, version 6.0. Itasca Consulting Group Inc
Kazerani T, Zhao J (2010) Micromechanical parameters in bonded particle method for modelling of brittle material failure. Int J Numer Anal Methods Geomech 34(18):1877–1895
Li PF, Zhao Y (2016) Performance of a multi-face tunnel excavated in loess ground based on field monitoring and numerical modeling. Arab J Geosci 9:640
Li XB, Cao WZ, Zhou ZL, Zou Y (2014) Influence of stress path on excavation unloading response. Tunn Undergr Sp Tech 42:237–246
Li XH, Ju MH, Yao QL, Zhou J, Chong ZH (2016) Numerical investigation of the effect of the location of critical rock block fracture on crack evolution in a gob-side filling wall. Rock Mech Rock Eng 49(3):1041–1058
Lin P, Liu HY, Zhou WY (2015) Experimental study on failure behaviour of deep tunnels under high in-situ stresses. Tunn Undergr Sp Tech 46:28–45
Marinos P, Hoek E (2001) Estimating the geotechnical properties of heterogeneous rock masses such as flysch. Bull Eng Geol Environ 60(2):85–92
Medhurst TP, Brown ET (1998) A study of the mechanical behaviour of coal for pillar design. Int J Rock Mech Min 35(8):1087–1105
Meng Q, Zhao HB, Zhu CX, Ru ZL (2018) Analytical and Reliability Study of the Tunnel with Rockbolts in Rock Masses. Period Polytech Civ 62:783–791
Osgoui RR, Ulusay R, Unal E (2010) An assistant tool for the geological strength index to better characterize poor and very poor rock masses. Int J Rock Mech Min 47(4):690–697
Sharifzadeh M, Kolivand F, Ghorbani M, Yasrobi S (2013) Design of sequential excavation method for large span urban tunnels in soft ground – Niayesh tunnel. Tunn Undergr Sp Tech 35:178–188
Singh R, Singh TN (1999) Investigation into the behaviour of a support system and roof strata during sublevel caving of a thick coal seam. Geotech Geol Eng 17(1):21–35
Sitharam TG, Latha GM (2002) Simulation of excavations in jointed rock masses using a practical equivalent continuum approach. Int J Rock Mech Min 39(4):517–525
Sun XM, Chen F, He MC, Gong WL, Xu HC, Lu H (2017) Physical modeling of floor heave for the deepburied roadway excavated in ten degree inclined strata using infrared thermal imaging technology. Tunn Undergr Sp Tech 63:228–243
Sun XM, Chen F, Miao CY, Song P, Li G, Zhao CW, Xia X (2018) Physical modeling of deformation failure mechanism of surrounding rocks for the deep-buried tunnel in soft rock strata during the excavation. Tunn Undergr Sp Tech 74:247–261
Tang SB, Tang CA (2012) Numerical studies on tunnel floor heave in swelling ground under humid conditions. Int J Rock Mech Min 55:139–150
Van-Heerden WL (1975) In situ complete stress-strain characteristics of large coal specimens. J S Afr Min Metall 75:207–217
Wang Q, Pan R, Jiang B, Li SC, He MC, Sun HB, Wang L, Qin Q, Yu HC, Luan YC (2017) Study on failure mechanism of roadway with soft rock in deep coal mine and confined concrete support system. Eng Fail Anal 81:155–177
Wang Q, Jiang B, Pan R, Li SC, He MC, Sun HB, Qin Q, Yu HC, Luan YC (2018) Failure mechanism of surrounding rock with high stress and confined concrete support system. Int J Rock Mech Min 102:89–100
Wang Q, Gao HK, Yu HC, Jiang B, Liu BH (2019) Method for measuring rock mass characteristics and evaluating the grouting-reinforced effect based on digital drilling. Rock Mech Rock Eng 52:841–851
Xie GX, Chang JC, Yang K (2009) Investigations into stress shell characteristics of surrounding rock in fully mechanized top-coal caving face. Int J Rock Mech Min 46(1):172–181
Yang SQ, Chen M, Jing HW, Chen KF, Meng B (2017) A case study on large deformation failure mechanism of deep soft rock roadway in Xin’An coal mine, China. Eng Geol 217:89–101
Yang ZM, Wu SC, Gao YT, Jin AB, Cong ZJ (2018) Time and technique of rehabilitation for large deformation of tunnels in jointed rock masses based on FDM and DEM numerical modeling. Tunn Undergr Sp Tech 81:669–681
Yassaghi A, Salari-Rad H (2005) Squeezing rock conditions at an igneous contact zone in the Taloun tunnels, Tehran-Shomal freeway, Iran: a case study. Int J Rock Mech Min 42(1):95–108
Zhang ZX, Xu Y, Kulatilake PHSW, Huang X (2012) Physical model test and numerical analysis on the behavior of stratified rock masses during underground excavation. Int J Rock Mech Min 49:134–147
Zhang GH, Jiao YY, Wang H (2014) Outstanding issues in excavation of deep and long rock tunnels: a case study. Can Geotech J 51(9):984–994
Zhang ZQ, Shi XQ, Wang B, Li HY (2017) Stability of NATM tunnel faces in soft surrounding rocks. Comput Geotech 96:90–102
Zuo YJ, Wang J, Dong LJ, Shu WW, Yu ML, Sun WJB, Wu ZH (2019) Optimization for U-Shaped Steel Support in Deep Tunnels under Coupled Static-Dynamic Loading. Adv Civ Eng 2019:1–19
Funding
This work was supported by the National Key Research and Development Plan of China (Grant No. 2016YFC0600901), the National Natural Science Foundation of China (Grant No. 51874311), the Special Fund of Basic Research and Operating of China University of Mining & Technology, Beijing (Grant No. 2009QL03), and the Yueqi Outstanding Scholar Award Program of China University of Mining and Technology, Beijing.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sun, X., Zhao, C., Tao, Z. et al. Failure mechanism and control technology of large deformation for Muzhailing Tunnel in stratified rock masses. Bull Eng Geol Environ 80, 4731–4750 (2021). https://doi.org/10.1007/s10064-021-02222-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10064-021-02222-5