Skip to main content

Advertisement

SpringerLink
Log in

Analysis of loess fracture on slope stability based on centrifugal model tests

  • Original Paper
  • Published:
Bulletin of Engineering Geology and the Environment Aims and scope Submit manuscript

Abstract

Natural slopes are very common for the complicated topography in the loess area; meanwhile, many artificial slopes were produced by large-scale engineering construction and excavation in recent years. The fractures are widely distributed in the slope, which have a great impact on the slope stability. It is difficult to find out a reasonable method of evaluating the stability of fractured slopes. So, the influence of loess fracture on slope stability was studied by using geotechnical centrifugal testing machine to simulate the process of stress-strain change of slope and systematically studied the influence factors of loess fissure on slope displacement and stress field change, deformation, and failure process. The results show that the displacement of the fractured loess slope is generally larger than that of the integrated loess slope. The difference in vertical displacement of slope edge between the two models is the largest, up to 2 cm. The horizontal displacements of the two models in the slope have a large difference before 1200 s, and the maximum displacement is 1.25 cm. After 1200 s, the difference gradually decreases. There is a great difference in the stress change trend between the two models. The stress in the slope foot, slope top, and slope edge of the fractured slope model has obviously reduced abruptly during the test, and the stress in the integrated loess slope model has little change during the test. It reflects the influence of fractures on the stress distribution of slopes, and the sudden change of stress is a response to the local failure of slopes. The results can provide reference for stability evaluation of fractured loess slopes and the prediction of the risk of loess landslide.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  • Bucky PB (1931) The use of models for the study of mining problems. Am.Inst.Met.Eng.Tech.Pub 425:28–30

    Google Scholar 

  • Cao J, Zheng JG, Zhang JW, Li B, Liu Z, Li P (2017) Centrifuge model tests of loess high-filled settlement under different boundary conditions. Journal of China Institute of Water Resources and Hydropower Research 15(4):256–262 (in Chinese with English abstract)

    Google Scholar 

  • Craig WH (1989) Edouard Phillips and the idea of centrifuge modeling. Geotechnique 39:679–700

    Article  Google Scholar 

  • Dong Y, Jia J, Zhang MS, Sun PP, Zhu LF, Bi JB (2013) An analysis of the inducing effects of irrigation and the responses of loess landslides in Heifangtai area. Geological Bulletin of China 32(6):893–898 (in Chinese with English abstract)

    Google Scholar 

  • He ZY, Zhou HX (2000) 3D finite element analysis of subsidence on high embankment. Journal of Chongqing Jiaotong Institute 19(3):58–62 (in Chinese with English abstract)

    Google Scholar 

  • Huo AD, Dang J, Song JX, Chen XH, Mao HR (2016a) Simulation modeling for water governance in basins based on surface water and groundwater. Agricultural Water Management 174:22–29

    Article  Google Scholar 

  • Huo AD, Peng JB, Chen XH, Deng L, Wang GL, Cheng YX (2016b) Groundwater storage and depletion trends in the Loess areas of China. Environmental Earth Sciences 75(16):1167 (in Chinese with English abstract)

    Article  Google Scholar 

  • Huo, A.D., Wang, X., Liang, Y., Jiang, C., Zheng, X. (2019). Integrated numerical model for irrigated area water resources management. Journal of Water and Climate Change. 102166/wcc2019042

  • Huo AD , Peng J, Cheng Y, Luo P, Zhao Z, Zheng C (2020a) Hydrological Analysis of Loess Plateau Highland Control Schemes in Dongzhi Plateau. Frontiers in Earth Science 8

  • Huo AD, Huang Z, Cheng Y, Liew MWV (2020b) Comparison of two different approaches for sensitivity analysis in Heihe River basin (China). Water Supply 20(1):319–327. https://doi.org/10.2166/ws.2019.159

    Article  Google Scholar 

  • Huo, A.D., Yang, L., Peng, J., Cheng, Y., Jiang, C. (2020c). Spatial characteristics of the rainfall induced landslides in the Chinese Loess Plateau. Human and Ecological Risk Assessment: An International Journal 1-16. doi:https://doi.org/10.1080/10807039.2020.1728517

  • Huo Aidi, Chen Siming, Peng Jianbing, Cheng Yuxiang, (2021a) UAV-based gully retrogressive erosion status dynamic variability investigations in Chinese Loess Plateau. Arabian Journal of Geosciences 14 (4)

  • Huo AD, Yang L, Luo P, Cheng Y, Peng J, Nover D (2021b) Influence of landfill and land use scenario on runoff, evapotranspiration, and sediment yield over the Chinese Loess Plateau. Ecological Indicators 121:107208

  • Jing HJ, Hu CS, Wang BG (2005) Study on settlement and deformation laws of high loess-fill embankment. Chinese Journal of Rock Mechanics and Engineering 24(S2):5845–5850 (in Chinese with English abstract)

    Google Scholar 

  • Li XZ, Xu Q, Kong JM, Ding XM (2005) Numerical modeling analysis of settlements of high fill foundation for Jiuzhai-Huanglong Airport. Chinese Journal of Rock Mechanics and Engineering 24(12):2188–2193 (in Chinese with English abstract)

    Google Scholar 

  • Liu H, Zhang ZY, Wen-Xi H (2003) Centrifugal model tests for settlement of high embankment. Journal of Southwest Jiaotong University 38(3):323–326 (in Chinese with English abstract)

    Google Scholar 

  • Liu H, Li PF, Zhang ZY (2005a) Prediction of the post-construction settlement of the high embankment of Jiuzhai-Huanglong Airport. Chinese Journal of Geotechnical Engineering 27(1):90–93 (in Chinese with English abstract)

    Google Scholar 

  • Liu, S.H., Han, W.X., Li, J.L., Liu, P. (2005b). Research on settlement behaviors of high-filling foundation by using centrifuge model. Geotechnical Investigation and Surveying, (2), 8-11+71 (in Chinese with English abstract).

  • Lu QZ, Peng JB, Chen ZX (2005) Research on characteristics of cracks and fissures of loess and their distribution in loess plateau of China. Journal of soil and water conservation 19(5):191–194 (in Chinese with English abstract)

    Google Scholar 

  • Miyake, M., Yanagihata, (1999)T. Heap shape of materials dumped from hopper barges by drum centrifuge. ISOPE, 745-748.

  • Schofield, A.N. (1981) Dynamic and earthquake geotechnical centrifuge modeling [A]. Intern.conf.on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics [C].

  • Sun P, Peng JB, Wu SR (2015) An experimental study on mechanical properties of fractured loess. Journal of Central South University (Science and technology) 46(6):2188–2195 (in Chinese with English abstract)

    Google Scholar 

  • Tian H, Kong LW, Li B (2015) Centrifugal modeling tests on stability of deposits slope under rainfall. Rock and Soil Mechanics 36(11):3180–3186 (in Chinese with English abstract)

    Google Scholar 

  • Wang LQ, Jin BC, Yang YH (2007) New model and method for forecasting post-construction settlement of loess-fill embankments. Chinese Journal of Rock Mechanics and Engineering 26(11):2370–2376 (in Chinese with English abstract)

    Google Scholar 

  • Wang MY, Liu Y, Ding YN, Yi BL (2020) Probabilistic stability analyses of multi-stage soil slopes by bivariate random fields and finite element methods. Computers and Geotechnics 122:103529. https://doi.org/10.1016/j.compgeo.2020.103529

    Article  Google Scholar 

  • Wu, J., Chen, K.S., Long, W.X. (2009). Numerical simulation in finite element of the sedimentation of high filled roadbed. Highway Engineering, 34(2), 27-29+33 (in Chinese with English abstract).

  • Xing JJ, Xing YC, Liang JH (2005) Development and thoughts of geotechnical centrifuge modeling. Journal of Water Resources 3(1):27–31 (in Chinese with English abstract)

    Google Scholar 

  • Yang T, Dai JQ, Li GW (2005) Settlement prediction of stage-constructed embankment on soft ground using the exponent fitting method. China Civil Engineering Journal 38(5):92–95 (in Chinese with English abstract)

    Google Scholar 

  • Zhang JB, Huang XN, Zheng JL, Wei JM, Xu XJ (2013) Centrifugal model tests on post-construction settlement of high embankment of Hechi Airport. Chinese Journal of Geotechnical Engineering 35(4):773–778 (in Chinese with English abstract)

    Google Scholar 

  • Zheng JG, Wang T, Zhang JW (2010) Study of settlement prediction methods of loess subgrade. Rock and Soil Mechanics 31(1):321–326 (in Chinese with English abstract)

    Google Scholar 

  • Zhu CH, Li N, Liu MZ, Wei GF (2013) Spatiotemporal laws of post-construction settlement of loess-filled foundation of Lvliang Airport. Chinese Journal of Geotechnical Engineering 35(2):293–301 (in Chinese with English abstract)

    Google Scholar 

Download references

Funding

This work was financially supported by the National Natural Science Foundation of China (Grant No. 41672255, 41877232 and 41790444); Key R&D Program of Shaanxi Province (2019SF-253 and 2020SF-424); a high-tech research cultivation project (Grants No. 300102299201); and the Key Laboratory Open Project Fund of State Key Laboratory of Loess and Quaternary Geology, Institute of Earth Environment, CAS (Grant No. SKLLQG1909).

Author information

Authors and Affiliations

  1. College of Geological Engineering and Geomatics, Chang’an University, Shaanxi, 710054, Xi’an, China

    Yuxiang Cheng & Jianbing Peng

  2. School of Water & Environmental, Chang’an University, Xi’an, 710054, Shaanxi, China

    Aidi Huo & Zhixin Zhao

  3. Key Laboratory of Subsurface Hydrology and Ecological Effects in Arid Region, Ministry of Education, Chang’an University, Xi’an, 710054, Shaanxi, China

    Aidi Huo & Zhixin Zhao

Authors
  1. Yuxiang Cheng
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Aidi Huo
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Zhixin Zhao
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Jianbing Peng
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Jianbing Peng.

Ethics declarations

Conflict of interest

The authors declare no conflict of interest.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Cheng, Y., Huo, A., Zhao, Z. et al. Analysis of loess fracture on slope stability based on centrifugal model tests. Bull Eng Geol Environ 80, 3647–3657 (2021). https://doi.org/10.1007/s10064-021-02135-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10064-021-02135-3

Keywords

Search

Navigation