Zusammenfassung
Die Kompressionsmarknagelung ist ein hervorragendes Osteosyntheseverfahren zur Versorgung von axial stabilen Frakturen ¶(AO-Typ A2 und A3) der langen Röhrenknochen. An Humerus, Femur und Tibia kann sowohl antero- als auch retrograd vorgegangen werden. Sollte intraoperativ bei Schräg- oder Spiralfrakturen ein Teleskoping auftreten, kann bei dem verwendeten Implantat jederzeit statisch verriegelt werden. Für die Anwendung beim Polytrauma und bei Weichteildefekten gelten die gleichen Prinzipien wie beim Verriegelungsmarknagel. Der Vorteil der Kompressionsmarknagelung besteht in der Kompression der Fraktur auch bei Entlastung der betroffenen Extremität. Nachteile wegen des Aufreamens der Markhöhle wurden von uns nicht beobachtet.
Abstract
Intramedullary compression nailing leads to very stable osteosynthesis of AO type A2 and A3 fractures of long bones. Both antegrade and retrograde approaches are possible in the case of fractures of humerus, tibia and femur. If a telescoping effect is observed during the operation the dynamic procedure can be changed for a static one when these implants are used. When this technique is applied in polytrauma and soft tissue damage the principles are the same as for other techniques using locking medullary nails. The advantages of the compression nailing technique are the very high stability for torsion and the continuous compression of the fracture even without weightbearing. We have not observed any disadvantages arising from reaming of the marrow cavity.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Militz, M., Hauck, S. & Bühren, V. Akute Frakturversorgung mit Kompressionsmarknagel. Trauma Berufskrankh 3, 180–187 (2001). https://doi.org/10.1007/s100390100471
Issue Date:
DOI: https://doi.org/10.1007/s100390100471