Abstract
In recent Japan, many elementary and secondary school children strongly feel an awareness of resistance toward manufacturing class. It is considered as one of the aversion causes to science and engineering. We suspect that the shortage of teacher’s manufacturing experience is related to this background. So, the authors previously have developed a brush coating skill training system with a haptic device to improve the ability. In the skill training, historically, the instruction method while reproducing the video of trainee’s action has been considered to be effective. Thus, our developed system includes a software system to visualize the brush coating motion. This software system can record trainee’s brush coating motion and visualize the data in virtual three-dimensional space, so the advisor and the trainee can share his/her skill level and the wrong motion such as extra shaking and tilt by reproducing his/her past training data on a computer screen. In this paper, to improve the learning effectiveness of our brush coating skill training system, some kinds of instructional methods are designed, and the difference of the instructional methods is analyzed based on the proposed criteria. This paper performed some experiments with 10 college students who have less experience of brush coating. From the analysis results, the most effective instruction method was clarified.
Similar content being viewed by others
References
Murata S, Stern S (1993) Technology education in Japan. J Technol Educ 5(1):29–37
Mayer R, Alexander P (Eds.) (2011) Handbook of research on learning and instruction. Routledge
Fujimoto H, Sakaguchi M (2009) Preservation and tradition of expert traditional skills with motion (in Japanese). J Jpn Soc Des Eng 44(2):65–70
Popovici D, Hamza-lup F, Bogdan C (2013) Haptic feedback systems in education. Proc eLearn Softw Educ 01:509–514
Nishino H, Murayama K, Kagawa T, Utsumiya K (2010) A Japanese calligraphy trainer based on skill acquisition through haptization. In: 24th IEEE international conference on advanced information networking and applications, pp 1225–1232
Kanehira R, Yang W, Fujimoto H (2012) Education and training environments for skill mastery. Multimed Signal Process Commun Comput Inf Sci 346:451–458
Matsumoto S, Fujimoto N, Teranishi M, Takeno H, Tokuyasu T (2015) A brush coating skill training system for manufacturing education at Japanese elementary and junior high schools. Artif Life Robot 21(1):69–78
Fujimoto N, Matsumoto S, Teranishi M, Takeno H (2016) Developing a virtual reality blended brush coating skill training system. In: Proceedings of 2016 annual conference of electronics, information and systems society, IEE of Japan, SS2-5, pp 1406–1407
Furukawa K et al (2009) Science of intelligence introduction to skill science. Ohmsha, Tokyo In Japanese
Matsura K (2015) To be able, and to be able to do well. J Jpn Soc Artif Intell 30(3):287–288 (In Japanese)
Miyachi M, Odaka H, Tsuji T, Suzuki S (2012) Instruction of how to use industrial tools in Monozukuri education (In Japanese). Res Bull Inf Multimed Center Gifu Univ 29(1):71–82
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was presented in part at the 21st International Symposium on Artificial Life and Robotics, Beppu, Oita, January 20–22, 2016.
About this article
Cite this article
Fujimoto, N., Matsumoto, S., Teranishi, M. et al. Examining efficient instructional methods for computer-aided brush coating skill training system in elementary and secondary education. Artif Life Robotics 22, 265–275 (2017). https://doi.org/10.1007/s10015-017-0355-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10015-017-0355-4