Abstract
In those days, the performance of underwater robot is improving because requirements for it are becoming higher and more complex than before. For those work, a highly precise and wide regional underwater positioning system is indispensable. However, the conventional positioning system that has three standard stations, is applicable for the field with no obstacle, because its principal depends on the time based measurement. Therefore, we developed a new underwater positioning system based on sensor network technology that is using a lot of standard stations equipping hydrophone and GPS sensor on the water surface. And decreasing the cost of sensor, we applied a simple method for measurement of distance, which is using sound power level. Therefore, this study has started with confirming the new principal for underwater positioning method. This paper is showing the availability with theoretical analysis and the performance of new method under the noise and reflection of sound in the water, and suggestions for the measures and an error compensation method.
Similar content being viewed by others
References
Japan Marine Science and Technology Center. Manned research submersible SHINKAI 6500 User’s Guide
Ando S, Tamura Y, et al (2005) Sensor network technology, Tokyo Denki University Press
Marine Acoustics Society of Japan (2004) The basics and application of Marine Acoustics, Seizando
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008
About this article
Cite this article
Fu, B., Zhang, F., Ito, M. et al. Development of a new underwater positioning system based on sensor network. Artif Life Robotics 13, 45–49 (2008). https://doi.org/10.1007/s10015-008-0583-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10015-008-0583-8