Skip to main content
SpringerLink
Log in

Effects of indium, gallium, or bismuth additions on the discharge behavior of Al-Mg-Sn-based alloy for Al-air battery anodes in NaOH electrolytes

  • Original Paper
  • Published:
Journal of Solid State Electrochemistry Aims and scope Submit manuscript

Abstract

In this paper, the electrochemical performances of Al 0.5-Mg 0.1-Sn (wt%), Al 0.5-Mg 0.1-Sn 0.05 In (wt%), Al 0.5-Mg 0.1-Sn 0.05 Ga (wt%) and Al 0.5-Mg 0.1-Sn 0.05 Bi (wt%) alloys were investigated through electrochemical techniques and microstructure observation in 4 M NaOH solution. The results indicate that Al 0.5-Mg 0.1-Sn 0.05 In (wt%) alloy has the best discharge performance among all alloys, followed by Al 0.5-Mg 0.1-Sn 0.05-Bi (wt%) alloy, both of which is better than Al 0.5 Mg 0.1-Sn 0.05-Ga (wt%) alloy. This is due to the fact that the addition of indium to the Al 0.5-Mg 0.1-Sn-based alloy improves the discharge activity of the alloy while increasing its anodic efficiency. Although the addition of gallium or bismuth to this alloy increases the discharge activity, it reduces the efficiency of the anode, especially the addition of gallium resulting in severe intergranular corrosion of the alloy anode.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Mutlu R, Yazici B (2019) Copper-deposited aluminum anode for aluminum-air battery. J Solid State Electrochem 23(2):529–541

    Article  CAS  Google Scholar 

  2. Ma Z, Li X (2011) The study on microstructure and electrochemical properties of Al-Mg-Sn-Ga-Pb alloy anode material for Al/AgO battery. J Solid State Electrochem 15(11-12):2601–2610

    Article  CAS  Google Scholar 

  3. Li Q, Bjerrum N (2002) Aluminum as anode for energy storage and conversion: a review. J Power Sources 110(1):1–10

    Article  CAS  Google Scholar 

  4. Liu Y, Sun Q, Li W, Adair KR, Li J, Sun X (2017) A comprehensive review on recent progress in aluminum-air batteries. Green Energy & Environment 2(3):246–277

    Article  Google Scholar 

  5. Ma J, Wen J, Gao J, Li Q (2014) Performance of Al-1Mg-1Zn-0.1Ga-0.1Sn as anode for Al-air battery. Electrochim Acta 129:69–75

    Article  CAS  Google Scholar 

  6. Egan DR, Ponce de León C, Wood RJK, Jones RL, Stokes KR, Walsh FC (2013) Developments in electrode materials and electrolytes for aluminium-air batteries. J Power Sources 236:293–310

    Article  CAS  Google Scholar 

  7. Abedin SZE, Endres F (2004) Electrochemical behaviour of Al, Al-In and Al-Ga-In alloys in chloride solutions containing zinc ions. J Appl Electrochem 34(10):1071–1080

    Article  Google Scholar 

  8. Gudić S, Radošević J, Smoljko I, Kliškić M (2005) Cathodic breakdown of anodic oxide film on Al and Al-Sn alloys in NaCl solution. Electrochim Acta 50(28):5624–5632

    Article  Google Scholar 

  9. Sun Z, Lu H, Fan L, Hong Q, Leng J, Chen C (2015) Performance of Al-air batteries based on Al-Ga, Al-In and Al-Sn alloy electrodes. J Electrochem Soc 162(10):A2116–A2122

    Article  CAS  Google Scholar 

  10. Mutlu R, Ateş S, Yazici B (2017) Al-6013-T6 and Al-7075-T7351 alloy anodes for aluminium-air battery. Int J Hydrog Energy 42(36):23315–23325

    Article  CAS  Google Scholar 

  11. Ma J, Wen J, Ren F, Wang G, Xiong Y (2016) Electrochemical performance of Al-Mg-Sn based alloys as anode for Al-air battery. J Electrochem Soc 163(8):A1759–A1764

    Article  CAS  Google Scholar 

  12. Kurt K, Diplas S, Walmsley JC, Nisancioglu K (2013) Effect of trace elements lead and tin on anodic activation of AA8006 aluminum sheet. J Electrochem Soc 160(11):C542–C552

    Article  CAS  Google Scholar 

  13. Shayeb HAE, Wahab FMAE, Abedin SZE (2001) Effect of gallium ions on the electrochemical behaviour of Al, Al-Sn, Al-Zn and Al-Zn-Sn alloys in chloride solutions. Corros Sci 43(4):643–654

    Article  Google Scholar 

  14. Flamini DO, Saidman SB, Bessone JB (2006) Aluminium activation produced by gallium. Corros Sci 48(6):1413–1425

    Article  CAS  Google Scholar 

  15. Senel E, Nisancioglu K (2014) Role of dealloying on the electrochemical behaviour of aluminium alloyed with trace amounts of gallium. Corros Sci 85:436–444

    Article  CAS  Google Scholar 

  16. Moghannibavilolyaei H, Arjomandi J (2015) Performance of Al-1Mg-1Zn-0.1Bi-0.02In as anode for the Al-AgO battery. RSC Adv 5(111):91273–91279

    Article  CAS  Google Scholar 

  17. Bessone JB, Flamini DO, Saidman SB (2005) Comprehensive model for the activation mechanism of Al-Zn alloys produced by indium. Corros Sci 47(1):95–105

    Article  CAS  Google Scholar 

  18. Jeffrey PW, Halliop W, Smith FN (1988) Aluminium anode alloy United States Patent 4751086

  19. Rao BML, Scamans GM (1993) Proc 10th international seminar on primary and secondary battery technology applications, Deerfied Beach, Florida

  20. Nestoridi M, Pletcher D, Wood RJK, Wang S, Jones RL, Stokes KR, Wilcockc I (2008) The study of aluminium anodes for high power density Al/air batteries with brine electrolytes. J Power Sources 178(1):445–455

    Article  CAS  Google Scholar 

  21. Ma J, Wen J, Zhu H, Li Q (2015) Electrochemical performances of Al-0.5Mg-00.1Sn-0.02In alloy in different solutions for Al-air battery. J Power Sources 293:592–598

    Article  Google Scholar 

  22. Ma J, Ren F, Wang G, Xiong Y, Li Y, Wen J (2017) Electrochemical performance of melt-spinning Al-Mg-Sn based anode alloys. Int J Hydrog Energy 42:11654–11661

    Article  CAS  Google Scholar 

  23. Srinivasa M, Adapakaa SK, Neelakantan L (2017) Solubility effects of Sn and Ga on the microstructure and corrosion behavior of Al-Mg-Sn-Ga alloy anodes. J Alloys Compd 683:647–653

    Article  Google Scholar 

  24. Liang R, Su Y, Sui XL, Gu DM, Huang GS, Wang ZB (2019) Effect of Mg content on discharge behavior of Al-0.05Ga-0.05Sn-0.05Pb-xMg alloy anode for aluminum-air battery. J Solid State Electrochem 23(1):53–62

    Article  CAS  Google Scholar 

  25. Fan L, Lu H, Leng J, Sun Z (2015) Performance of Al-0.6Mg-0.05Ga-0.1Sn-0.1In as anode for Al-air battery in KOH electrolytes. J Electrochem Soc 162(14):A2623–A2627

    Article  CAS  Google Scholar 

  26. Ma J, Wen J, Gao J, Li Q (2014) Performance of Al-0.5Mg-0.02Ga-0.1Sn-0.5Mn as anode for Al-air battery in NaCl solutions. J Power Sources 253:419–423

    Article  CAS  Google Scholar 

  27. Li J, Zhang B, Wei Q, Wang N, Hou B (2017) Electrochemical behavior of Mg-Al-Zn-in alloy as anode materials in 3.5 wt.% NaCl solution. Electrochim Acta 238:156–167

    Article  CAS  Google Scholar 

  28. Wang Q, Miao H, Xue Y, Sun S, Li S, Liu Z (2017) Performances of an Al-0.15 Bi-0.15 Pb-0.035 Ga alloy as an anode for Al-air batteries in neutral and alkaline electrolytes. RSC Adv 7(42):25838–25847

    Article  CAS  Google Scholar 

  29. Moghanni-Bavil-Olyaei H, Arjomandi J (2016) Enhanced electrochemical performance of Al-0.9Mg-1Zn-0.1Mn-0.05Bi-0.02In fabricated from commercially pure aluminum for use as the anode of alkaline batteries. RSC Adv 6(33):28055–28062

    Article  CAS  Google Scholar 

  30. Gudić S, Smoljko I, Kliškić M (2010) The effect of small addition of tin and indium on the corrosion behavior of aluminium in chloride solution. J Alloys Compd 505(1):54–63

    Article  Google Scholar 

  31. Khireche S, Boughrara D, Kadri A, Hamadou L, Benbrahim N (2014) Corrosion mechanism of Al, Al-Zn and Al-Zn-Sn alloys in 3wt.% NaCl solution. Corros Sci 87:504–516

    Article  CAS  Google Scholar 

  32. Xiong W, Qi GT, Guo XP, Lu ZL (2011) Anodic dissolution of Al sacrificial anodes in NaCl solution containing Ce. Corros Sci 53(4):1298–1303

    Article  CAS  Google Scholar 

  33. Tang Y, Lu L, Roesky HW, Wang L, Huang B (2004) The effect of zinc on the aluminum anode of the aluminum–air battery. J Power Sources 138(1-2):313–318

    Article  CAS  Google Scholar 

  34. Wang N, Wang R, Peng C, Feng Y, Chen B (2012) Effect of hot rolling and subsequent annealing on electrochemical discharge behavior of AP65 magnesium alloy as anode for seawater activated battery. Corros Sci 64:17–27

    Article  CAS  Google Scholar 

  35. Abdel-Gaber AM, Khamis E, Abo-Eldahab et al (2010) Novel package for inhibition of aluminium corrosion in alkaline solutions. Mater Chem Phys 124(1):773–779

    Article  CAS  Google Scholar 

  36. Moghanni-Bavil-Olyaei H, Arjomandi J, Hosseini M (2017) Effects of gallium and lead on the electrochemical behavior of Al-Mg-Sn-Ga-Pb as anode of high rate discharge battery. J Alloys Compd 695:2637–2644

    Article  CAS  Google Scholar 

  37. Umoren SA, Li Y, Wang FH (2011) Effect of aluminium microstructure on corrosion and inhibiting effect of polyacrylic acid in H2SO4 solution. J Appl Electrochem 41(3):307–315

    Article  CAS  Google Scholar 

  38. Liu X, Zhang P, Xue J (2019) The role of micro-naoscale AlSb precipitates in improving the discharge performance of Al-Sb alloy anodes for Al-air batteries. J Power Sources 425:174–182

    Article  Google Scholar 

  39. Liu X, Xue J, Zhang P, Wang Z (2019) Effects of the combinative Ca, Sm and La additions on the electrochemical behaviors and discharge performance of the as-extruded AZ91 anodes for Mg-air batteries. J Power Sources 414:186–194

    Article  Google Scholar 

  40. Rohrer GS (2011) Grain boundary energy anisotropy: a review. J Mater Sci 46(18):5881–5895

    Article  CAS  Google Scholar 

Download references

Acknowledgments

The authors received financial support from the National Natural Science Foundation of China (Grant No. U1864209) and National Natural Science Foundation of China-Liaoning Provincial People’s Government Joint Fund (Grant No. U1708253).

Author information

Authors and Affiliations

  1. Key Laboratory of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University, Shenyang, 110819, China

    Zibin Wu, Haitao Zhang, Cheng Guo, Jing Zou, Ke Qin & Chunyan Ban

  2. Suzhou Research Institute for Nonferrous Metals, Suzhou, 215000, China

    Hiromi Nagaumi

Authors
  1. Zibin Wu
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Haitao Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Cheng Guo
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Jing Zou
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Ke Qin
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Chunyan Ban
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Hiromi Nagaumi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Haitao Zhang.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Wu, Z., Zhang, H., Guo, C. et al. Effects of indium, gallium, or bismuth additions on the discharge behavior of Al-Mg-Sn-based alloy for Al-air battery anodes in NaOH electrolytes. J Solid State Electrochem 23, 2483–2491 (2019). https://doi.org/10.1007/s10008-019-04341-2

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10008-019-04341-2

Keywords

Search

Navigation