Abstract
Electrochemical performances of non-stoichiometric Cu2S x (1.25 ≤ x ≤ 0.625) cathodes prepared by spray pyrolysis and followed annealing were investigated after coating on carbon fiber paper (CFP) and Cu foil current collectors. The chemical composition influence on the electrochemical properties of Cu2S x was noticeably observed on a Cu foil current collector, especially at higher charge-discharge rates. Electrochemical impedance spectroscopy revealed that Cu/S ≈ 3.2 M ratio electrode shows lower interfacial charge transfer resistance (R ct) after 5 cycles at 0.1 C compared with Cu/S ≈ 1.6 M ratio electrode on both current collectors. Accordingly, the electrode with Cu/S ≈ 3.2 M ratio showed the highest discharge capacity of 350 mAh g−1 at 5 C on a Cu foil current collector. The excess of Cu in Cu2S x enhanced electrode utilization with the cycle number and facilitated fast charge transfer.
References
Marom R, Amalraj SF, Leifer N, Jacob D, Aurbach D (2011) A review of advanced and practical lithium battery materials. J Mater Chem 21:9938–9954
Nitta N, Wu F, Lee JT, Yushin G (2015) Li-ion battery materials: present and future. Mater Today 18:252–264
Scrosati B, Hassoun J, Sun YK (2011) Lithium-ion batteries. A look into the future. Energy Environ Sci 4:3287–3295
Jache B, Mogwitz B, Klein F, Adelhelm P (2014) Copper sulfides for rechargeable lithium batteries: linking cycling stability to electrolyte composition. J Power Sources 247:703–711
Shi C, Li X, He X, Zhao J (2015) New insight into the interaction between carbonate-based electrolyte and cuprous sulfide electrode material for lithium ion batteries. Electrochim Acta 174:1079–1087
Jayaprakash N, Shen J, Moganty SS, Corona A, Archer LA (2011) Porous hollow carbon@sulfur composites for high-power lithium-sulfur batteries. Angew Chem 123:6026–6030
Ji X, Nazar LF (2010) Advances in Li-S batteries. J Mater Chem 20:9821–9826
Wang X, Wang Y, Li X, Liu B, Zhao J (2015) A facile synthesis of copper sulfides composite with lithium-storage properties. J Power Sources 281:185–191
Ni S, Lv X, Li T, Yang X (2013) Fabrication of Cu2S cathode for Li-ion battery via a low temperature dry thermal sulfuration method. Mater Chem Phys 143:349–354
Meng X, Riha SC, Libera JA, Wu Q, Wang H-H, Martinson ABF, Elam JW (2015) Tunable core-shell single-walled carbon nanotube-Cu2S networked nanocomposites as high-performance cathodes for lithium-ion batteries. J Power Sources 280:621–629
Han F, Li W-C, Li D, Lu A-H (2014) In situ electrochemical generation of mesostructured Cu2S/C composite for enhanced lithium storage: mechanism and material properties. ChemElectroChem 1:733–740
Lai C-H, Huang K-W, Cheng J-H, Lee C-Y, Hwang B-J, Chen L-J (2010) Direct growth of high-rate capability and high capacity copper sulfide nanowire array cathodes for lithium-ion batteries. J Mater Chem 20:6638–6645
Fu Y, Manthiram A (2013) Electrochemical properties of Cu2S with ether-based electrolyte in Li-ion batteries. Electrochim Acta 109:716–719
Liu Y, Jin B, Zhu YF, Ma XZ, Lang XY (2015) Synthesis of Cu2S/carbon composite with improved lithium storage performance. Int J Hydrog Energy 40:670–674
Kalimuldina G, Taniguchi I (2016) Synthesis and electrochemical characterization of stoichiometric Cu2S as cathode material with high rate capability for rechargeable lithium batteries. J Power Sources 331:258–266
Kalimuldina G, Taniguchi I (2017) High performance stoichiometric Cu2S cathode on carbon fiber paper current collector for lithium batteries. Electrochim Acta 224:329–336
Taniguchi I, Lim CK, Song D, Wakihara M (2002) Particle morphology and electrochemical performances of spinel LiMn2O4 powders synthesized using ultrasonic spray pyrolysis method. Solid State Ionics 146:239–247
Potter RW II, Evans HT Jr (1976) Definitive X-ray powder data for covellite, anilite, djurleite, and chalcocite. J Research US Geol Surv 4:205–212
Xiang JY, Tu JP, Zhang L, Zhou Y, Wang XL, Shi SJ (2010) Simple synthesis of surface-modified hierarchical copper oxide spheres with needle-like morphology as anode for lithium ion batteries. Electrochim Acta 55:1820–1824
Debart A, Dupont L, Patrice R, Tarascon J-M (2006) Reactivity of transition metal (Co, Ni, Cu) sulphides versus lithium: the intriguing case of copper sulphide. Solid State Sci 8:640–651
Jia L, Wu T, Lu J, Ma L, Zhu W, Qiu X (2016) Polysulfides capture-copper additive for long cycle life lithium sulfur batteries. ACS Appl Mater Interfaces 8:30248–30255
Kalimuldina G, Taniguchi I (2017) Electrochemical properties of stoichiometric CuS coated on carbon fiber paper and Cu foil current collectors as cathode material for lithium batteries. J Mater Chem A 5:6937–6946
Cai R, Chen J, Zhu J, Xu C, Zhang W, Zhang C, Shi W, Tan H, Yang D, Hng HH, Lim TM, Yan Q (2012) Synthesis of CuxS/Cu nanotubes and their lithium storage properties. J Phys Chem C 116:12468–12474
Acknowledgements
This research was partially supported by the Ministry of Education, Culture, Sports, Science and Technology of Japan (Grant No. 15H04251).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kalimuldina, G., Taniguchi, I. Electrochemical characterization of non-stoichiometric Cu2S x cathode for lithium batteries. J Solid State Electrochem 21, 3057–3063 (2017). https://doi.org/10.1007/s10008-017-3625-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10008-017-3625-0