Avoid common mistakes on your manuscript.
1 Erratum to: Appl Magn Reson (2010) 37:845–850 DOI 10.1007/s00723-009-0090-7
There was an error in the calculation of the rate constants in p. 849 and they were three orders of magnitude too large.
“The k value obtained from the slope of the linear fit and the [dithionite] used yield k ≈ (0.8 ± 0.1) × 106 M−1 s−1. The rate constant calculated from the data of Lassmann et al. [12, 13] was k ≈ 4 × 106 M−1 s−1” should be replaced with “The k value obtained from the slope of the linear fit and the [dithionite] used yield k ≈ (0.8 ± 0.1) × 103 M−1 s−1. The rate constant calculated from the data of Lassmann et al. [12, 13] was k ≈ 4 × 103 M−1 s−1.”
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found under doi:10.1007/s00723-009-0090-7.
Rights and permissions
About this article
Cite this article
Potapov, A., Goldfarb, D. Erratum to: A Calibration Reaction for Rapid Freeze-Quench W-Band EPR. Appl Magn Reson 44, 435 (2013). https://doi.org/10.1007/s00723-012-0424-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00723-012-0424-8