ZUSAMMENFASSUNG
Applikationstypen und Anwendungsschritte, Lösungsmittel und Füllergehalt, Eigenschaften und Testmethoden, Probleme und Grenzen verschiedener Arten von Dentinhaftmitteln werden zusammengefasst.
SUMMARY
Type and steps of application, solvents and filler content, properties and problems of different types of dentin bonding agents are reviewed.
LITERATUR
Abdalla AI, García-Godoy F (2002) Morphological characterization of single bottle adhesives and vital dentin interface. Am J Dent 15: 31–34
Abu-Hanna A, Gordan VV (2004) Evaluation of etching time on dentin bond strength using single bottle bonding systems. J Adhesive Dent 6: 105–110
Al-Turki M, Akpata ES (2002) Penetrability of dentinal tubules in adhesive-lined cavity walls. Operative Dentistry 27: 124–131
Blunck U (2003) Marktübersicht Adhäsivsysteme. Zahn Prax 6: 424–449
Breschi L, Gobbi P, Falconi M, Mazzotti G, Prati C, Perdigao J (2003) Ultra-morphology of self-etching adhesives on ground enamel: A high resolution SEM study. Am J Dent 16: 57A–62A
Cardoso PEC, Sadek FT, Goracci C, Ferrari M (2002) Adhesion testing with the microtensile method: effects of dental substrate and adhesive system on bond strength measurements. J Adhesive Dent 4: 291–298
Carpena Lopes G, De Carvalho Cardoso P, Cardoso Vieira LC, Baratieri LN (2004) Microtensile bond strength to root canal vs pulp chamber dentin: effect of bonding strategies. J Adhesive Dent 6: 129–134
Ceballos L, Camejo DG, Victoria Fuentes M, Osorio R, Toledano M, Carvalho RM, Pashley DH (2003) Microtensile bond strength of total etch and self etching adhesives to caries affected dentine. J Dent 31: 469–477
Dammaschke T, Stratmann U, Mokrys K, Kaup M, Ott KHR (2003) Histozytologische Untersuchung zur Kurzzeit-Reaktion der Pulpa auf drei verschiedene Dentinhaftvermittler. Dtsch Zahnärztl Z 58: 32–37
De Munck J, Van Meerbeek B, Satoshi I, Vargas M, Yoshida Y, Armstrong S, Lambrechts P, Vanherle G (2003) Microtensile bond strengths of one- and two-step self-etch adhesives to bur-cut enamel and dentin. Am J Dent 16: 414–420
Dunn WJ, Söderholm KJM (2001) Comparison of shear and flexural bond strength tests versus failure modes of dentin bonding systems. Am J Dent 14: 297–303
El-Din AKN, Abd el-Mohsen MM (2002) Effect of changing application times on adhesive systems bond strengths. Am J Dent 15: 321–324
Elkhatib H, Nakajima M, Hiraishi N, Kitasako Y, Tagami J, Nomura S (2003) Surface pH and bond strength of a self-etching primer/adhesive system to intracoronal dentin after application of hydrogen peroxide bleach with sodium perborate. Operative Dentistry 28: 591–597
Fabianelli A, Kugel G, Ferrari M (2003) Efficacy of self-etching primer on sealing margins of class II restorations. Am J Dent 16: 37–41
Feigal RJ, Quelhas I (2003) Clinical trial of a self-etching adhesive for sealant application: success at 24 months with Prompt L-Pop. Am J Dent 16: 249–251
Ferrari M, Tay FR (2003) Technique sensitivity in bonding to vital, acid-etched dentin. Operative Dent 28: 3–8
Frankenberger R (2002) Zur Dauerhaftigkeit des Dentinverbunds. Dtsch Zahnärztl Z 57: 154–171
Goldner J (1938) A modification of the Masson trichrom technique for routine laboratory purpose. Am J Path 14: 237–242
Hayakawa T, Nemoto K (2002) Efficacy of self-etching primers in the adhesion of 4-META/MMA-TBB resin cement to enamel. J Adhesive Dent 4: 105–114
Imazato S, Kuramoto A, Kaneko T, Ebisu S, Russell RRB (2002) Comparison of antibacterial activity of simplified adhesive systems. Am J Dent 15: 356–360
Inoue S, Vargas MA, Abe Y, Yoshida Y, Lambrechts P, Vanherle G, Sano H, Van Meerbeek B (2003) Microtensile bond strength of eleven contemporary adhesives to enamel. Am J Dent 16: 329–334
Itou K, Torii Y, Oyama F, Yoshiyama M, Pashley DH (2003) Effect of drying methods on hybrid layer thickness. Am J Dent 16: 335–339
Iványi I, Balogh AE, Fazekas A, Rosivall L, Nyárasdy I (2002) Comparative analysis of pulpal circulatory reaction to an acetone-containing and an acetone-free bonding agent as measured by vitalmicroscopy. Operative Dentistry 27: 367–372
Kinomoto Y, Carnes DL, Ebisu S (2003) Cytotoxicity of dentin conditioners and primers on human periodontal ligament cells in vitro. Am J Dent 16: 125–128
Kubo S, Li H, Burrow MF, Tyas MJ (2002) Nanoleakage of dentin adhesive systems bonded to carisolv-treated dentin. Operative Dentistry 27: 387–395
Lee J, Jang KT, Kim JW, Lee SH, Hahn SH, Kim CC (2003) Effect of ultrasonic vibration on dentin bond strength and resin infiltration. Am J Dent 16: 404–408
Li HP, Burrow MF, Tyas MJ (2001) The effect of long-term storage on nanoleakage. Operative Dentistry 26: 609–616
Matos AB, Tate WH, Powers JM (2003) Influence of enamel surface preparation on composite bond strength. Am J Dent 16: 37A–40A
Meiers JC, Young D (2001) Two-year composite / dentin bond stability. Am J Dent 14: 141–144
Moll K, Park HJ, Haller B (2002) Bond strength of adhesive/composite combinations to dentin involving total- and self-etch adhesives. J Adhesive Dent 4: 171–180
Murray PE, Windsor LJ, Hafez AA, Stevenson RG, Cox CF (2003) Comparison of pulp responses to resin composites. Operative Dentistry 28: 242–250
Nakabayashi N, Kojima K, Masuhara E (1982) The promotion of adhesion bey the infiltration of monomers into tooth substrates. J Biomed Mater Res 16: 265–273
Nakajima M, Okuda M, Ogata M, Pereira PNR, Tagami J, Pashley DH (2003) The durability of a fluoride-releasing resin adhesive system to dentin. Operative Dentistry 28: 186–192
Nakaoki Y, Nikaido T, Burrow MF, Tagami J (2002) Effect of residual water on dentin bond strength and hybridization of a one-bottle adhesive system. Operative Dentistry 27: 563–568
Nunes MF, Swift EJ, Perdigao J (2001) Effects of adhesive composition on microtensile bond strength to human dentin. Am J Dent 14: 340–343
Ogata M, Harada N, Yamaguchi S, Nakajima M, Tagami J (2002) Effect of self-etching primer vs phosphoric acid etchant on bonding to bur-prepared dentin. Operative Dentistry 27: 447–454
Okuda M, Pereira PNR, Nakajima M, Tagami J (2001) Relationship between nanoleakage and long-term durability of dentin bonds. Operative Dentistry 26: 482–490
Okuda M, Pereira PNR, Nakajima M, Tagami J, Pashley DH (2002) Long-term durability of resin dentin interface: nanoleakage vs microtensile bond strength. Operative Dentistry 27: 289–296
Owens BM, Johnson WW (2005) Effect of insertion technique and adhesive system on microleakage of Class V resin composite restorations. J Adhes Dent 7: 303–308
Pashley DH, Carvalho RM, Tay FR, Agee KA, Lee KW (2002) Solvation of dried dentin matrix by water and other polar solvents. Am J Dent 15: 97–102
Pereira PNR, Okuda M, Nakajima M, Sano H, Tagami J, Pashley DH (2001) Relationship between bond strengths and nanoleakage: Evaluation of a new assessment method. Am J Dent 14: 100–104
Perry AO, Rueggeberg FA (2003) The effect of acid primer or conventional acid etching on microleakage in a photoactivated sealant. Pediatr Dent 25: 127–131
Peutzfeldt A, Nielsen LA (2004) Bond strength of a sealant to primary and permanent enamel: phosphoric acid versus self-etching adhesive. Pediatr Dent 26: 240–244
Pioch T, Staehle HJ, Duschner H, García-Godoy F (2001) Nanoleakage at the composite-dentin interface: a review. Am J Dent 14: 252–258
Pioch T, Staehle HJ, Schneider H, Duschner H, Dörfer CE (2001) Effect of intrapulpal pressure simulation in vitro on shear bond strenghts and hybrid layer formation. Am J Dent 14: 319–323
Rathke A (2001) Klinik der Dentinadhäsive: Prinzipien, Fehler und Prognosen. Ivoclar Vivadent Report Nr 14: 5–23
Reis A, De Oliveira Carrilho MR, Schroeder M, Tancredo LLF, Dourado Loguercio A (2004) The influence of storage time and cutting speed on microtensile bond strength. J Adhesive Dent 6: 7–12
Schmalz G, Schuster U, Koch A, Schweikl H (2002) Cytotoxicity of low pH dentin-bonding agents in a dentin barrier test in vitro. J Endod 28: 188–192
Shinohara MS, Barbieri Bedran-de-Castro AK, Amaral CM, Pimenta LAF (2004) The effect of sodium hypochlorite on microleakage of composite resin restorations using three adhesive systems. J Adhesive Dent 6: 123–128
Spencer P, Wang Y, Katz JL (2004) Identification of collagen encapsulation at the dentin/adhesive interface. J Adhesive Dent 6: 91–96
Suh BI, Feng L, Pashley DH, Tay FR (2003) Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part III – Effect of acidic resin monomers. J Adhes Dent 5: 267–282
Szep S, Kessler B, May A, Langner N, Gerhardt T, Schriever A, Becker J, Heidemann D (2001) Haftkraft und Randschlussverhalten moderner Dentinhaftvermittlersysteme bei simuliertem Liquordruck in vitro. Dtsch Zahnärztl Z 56: 532–538
Tay F (2003) Dentinadhäsive – Status quo und Zukunft. Dentsply/Detrey News 02/2003
Tay FR, Smales RJ, Ngo H, Wei SHY, Pashley DH (2001) Effect of different conditioning protocols on adhesion of a GIC to dentin. J Adhesive Dent 3: 153–167
Tay FR, King NM, Chan KM, Pashley DH (2002) How can nanoleakage occur in self-etching adhesive systems that demineralize and infiltrate simultaneously? J Adhesive Dent 4: 255–270
Tay FR, Pashley DH (2002) Dental adhesives of the future. J Adhes Dent 4: 91–103
Tay FR, Pashley DH (2003) Water treeing – a potential mechanism for degradation of dentin adhesives. Am J Dent 16: 6–12
Tay FR, Pashley DH, Peters MC (2003) Adhesive permeability affects composite coupling to dentin treated with a self-etch adhesive. Operative Dentistry 28: 610–621
Tay FR, Suh BI, Pashley DH, Prati C, Chuang SF, Li F (2003) Factors contributing to the incompatibility between simplified-step adhesives and self-cured or dual-cured composites. Part II. Single-bottle, total-etch adhesive. J Adhesive Dent 5: 91–106
Toledano M, Perdigao J, Osorio E, Osorio R (2002) Influence of NaOCl deproteinization on shear bond strength in function of dentin depth. Am J Dent 15: 252–255
Torii Y, Itou K, Nishitani Y, Ishikawa K, Suzuki K (2002) Effect of phosphoric acid etching prior to self-etching primer application on adhesion of resin composite to enamel and dentin. Am J Dent 15: 305–308
Torres CRG, De Araújo MAM, De Mello Torres AC (2004) Effects of dentin collagen removal on microleakage of bonded restorations. J Adhesive Dent 6: 33–42
Turkun LS, Ates M, Turkun M, Uzer E (2005) Antibacterial activity of two adhesive systems using various microbiological methods. J Adhes Dent 7: 315–320
Van Dijken JWV (2004) Durability of three simplified adhesive systems in Class V non-carious cervical dentin lesions. Am J Dent 17: 27–32
Van Meerbeek B, De Munck J, Mattar D, Van Landuyt K, Lambrechts P (2003) Microtensile bond strengths of an etch & rinse and self-etch adhesive to enamel and dentin as a function of surface treatment. Operative Dentistry 28: 647–660
Vaysman T, Rajan N, Thompson VP (2003) Effect of bur cutting patterns and dentin bonding agents on dentin permeability in a fluid flow model. Operative Dentistry 28: 522–528
Xie B, Dickens SH, Giuseppetti AA (2002) Microtensile bond strength of thermally stressed composite-dentin bonds mediated by one-bottle adhesives. Am J Dent 15: 177–184
Yiu CKY, García-Godoy F, Tay FR, Pashley DH, Imazato S, King NM, Lai SCN (2002) A nanoleakage perspective on bonding to oxidized dentin. J Dent Res 81: 628–632
Yoshiyama M, Tay FR, Doi J, Nishitani Y, Yamada T, Itou K, Carvalho RM, Nakajima M, Pashley DH (2002) Bonding of self-etch and total-etch adhesives to carious dentin. J Dent Res 81: 556–560
Yoshiyama M, Tay FR, Torii Y, Nishitani Y, Doi J, Itou K, Ciucchi B, Pashley DH (2003) Resin adhesion to carious dentin. Am J Dent 16: 47–52
Author information
Authors and Affiliations
Additional information
Anschrift des Verfassers: P. Städtler, Klinische Abteilung für Zahnerhaltung, Universität Graz, Auenbruggerplatz 6A, 8036 Graz, Österreich
Rights and permissions
About this article
Cite this article
Städtler, P. Dentinhaftmittel. Stomatologie 104, 101–109 (2007). https://doi.org/10.1007/s00715-007-0037-2
Issue Date:
DOI: https://doi.org/10.1007/s00715-007-0037-2