Advertisement

Acta Mechanica

, Volume 229, Issue 6, pp 2703–2717 | Cite as

A revisiting of the elasticity solution for a transversely isotropic functionally graded thick-walled tube based on the Mori–Tanaka method

  • Libiao Xin
  • Guansuo Dui
  • Dongmei Pan
  • Yanbin Li
Original Paper

Abstract

In this paper, we present the elastic solutions for the problem of an internal pressurized functionally graded thick-walled tube based on the Voigt method in Xin et al. (Int J Mech Sci 89:344–349, 2014); a transversely isotropic functionally graded thick-walled tube subjected to internal pressure is studied. It is assumed that the functionally graded tube is made up of two linear isotropic elastic materials; the matrix is reinforced by fibers with circular cross section all aligned in the circumferential direction. The volume fraction of the reinforced material is identical with our previous work (i.e., Xin et al. in Int J Mech Sci 89:344–349, 2014). By using the Mori–Tanaka method, this paper obtains the differential equation of the radial displacement and then the numerical results of the radial displacement and the stresses are deduced. The approximate analytical solutions are also derived which agree well with the numerical results on the basis of the Mori–Tanaka method. Further, both based on the Mori–Tanaka method, the results received by the present model are compared with those by a particle model for solving an isotropic inner-pressurized FGM tube problem. Finally, in the numerical part the influences of the volume fraction and the elastic moduli’s ratio on radial displacement and the stresses are discussed.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Suresh, S., Mortensen, A.: Fundamentals of Functionally Graded Materials. IOM Communications, London (1998)Google Scholar
  2. 2.
    Miyamoto, Y., Kaysser, W.A., Rabin, B.H., Kawasaki, A., Ford, R.G.: Functionally Graded Materials: Design, Processing and Applications. Springer, New York (2013)Google Scholar
  3. 3.
    Goupee, A.J., Vel, S.S.: Transient multiscale thermoelastic analysis of functionally graded materials. Compos. Struct. 92, 1372–1390 (2010)CrossRefGoogle Scholar
  4. 4.
    Yang, S., Chen, Y.: Wrinkle surface instability of an inhomogeneous elastic block with graded stiffness. Proc. R. Soc. A 473, 20160882 (2017)MathSciNetCrossRefGoogle Scholar
  5. 5.
    Dai, H.L., Rao, Y.N., Dai, T.: A review of recent researches on FGM cylindrical structures under coupled physical interactions, 2000–2015. Compos. Struct. 152, 199–225 (2016)CrossRefGoogle Scholar
  6. 6.
    Dai, H.L., Luo, W.F., Dai, T., Luo, W.F.: Exact solution of thermoelectroelastic behavior of a fluid-filled FGPM cylindrical thin-shell. Compos. Struct. 162, 411–423 (2017)CrossRefGoogle Scholar
  7. 7.
    Dai, H.L., Qi, Y.N., Luo, W.F.: Investigation on electrothermoelastic behavior of FGPM cylindrical shells. Int. J. Nonlinear Sci. Numer. Simul. 17, 55–64 (2016)MathSciNetCrossRefGoogle Scholar
  8. 8.
    Mallick, P.K.: Fiber-Reinforced Composites: Materials, Manufacturing, and Design. CRC Press, New York (2007)CrossRefGoogle Scholar
  9. 9.
    Kyriakides, S., Arseculeratne, R., Perry, E.J., Liechti, K.M.: On the compressive failure of fiber reinforced composites. Int. J. Solids Struct. 32, 689–738 (1995)CrossRefzbMATHGoogle Scholar
  10. 10.
    Singleton, A.C.N., Baillie, C.A., Beaumont, P.W.R., Peijs, T.: On the mechanical properties, deformation and fracture of a natural fibre/recycled polymer composite. Compos. Part B Eng. 34, 519–526 (2003)CrossRefGoogle Scholar
  11. 11.
    Keller, A.: Compounding and mechanical properties of biodegradable hemp fibre composites. Compos. Sci. Technol. 63, 1307–1316 (2003)CrossRefGoogle Scholar
  12. 12.
    Rana, A.K., Mandal, A., Bandyopadhyay, S.: Short jute fiber reinforced polypropylene composites: effect of compatibiliser, impact modifier and fiber loading. Compos. Sci. Technol. 63, 801–806 (2003)CrossRefGoogle Scholar
  13. 13.
    Oksman, K., Skrifvars, M., Selin, J.F.: Natural fibres as reinforcement in polylactic acid (PLA) composites. Compos. Sci. Technol. 63, 1317–1324 (2003)CrossRefGoogle Scholar
  14. 14.
    Barai, P., Weng, G.J.: A theory of plasticity for carbon nanotube reinforced composites. Int. J. Plast. 27, 539–559 (2011)CrossRefzbMATHGoogle Scholar
  15. 15.
    Pan, Y., Weng, G.J., Meguid, S.A., Bao, W.S., Zhu, Z.H., Hamouda, A.M.S.: Interface effects on the viscoelastic characteristics of carbon nanotube polymer matrix composites. Mech. Mater. 58, 1–11 (2013)CrossRefGoogle Scholar
  16. 16.
    Taj, S., Munawar, M.A., Khan, S.: Natural fiber-reinforced polymer composites. Proc. Pak. Acad. Sci. 44, 129 (2007)Google Scholar
  17. 17.
    Khoathane, M.C., Vorster, O.C., Sadiku, E.R.: Hemp fiber-reinforced 1-pentene/polypropylene copolymer: the effect of fiber loading on the mechanical and thermal characteristics of the composites. J. Reinf. Plast. Compos. 27, 1533–1544 (2008)CrossRefGoogle Scholar
  18. 18.
    Malkapuram, R., Kumar, V., Yuvraj, S.N.: Recent development in natural fibre reinforced polypropylene composites. J. Reinf. Plast. Compos. 28, 1169–1189 (2008)CrossRefGoogle Scholar
  19. 19.
    Nabi Saheb, D., Jog, J.P.: Natural fiber polymer composites: a review. Adv. Polym. Technol. 18, 351–363 (1999)CrossRefGoogle Scholar
  20. 20.
    Wambua, P., Ivens, J., Verpoest, I.: Natural fibres: can they replace glass in fibre reinforced plastics. Compos. Sci. Technol. 63, 1259–1264 (2003)CrossRefGoogle Scholar
  21. 21.
    Xin, L., Dui, G., Yang, S., Zhang, J.: An elasticity solution for functionally graded thick-walled tube subjected to internal pressure. Int. J. Mech. Sci. 89, 344–349 (2014)CrossRefGoogle Scholar
  22. 22.
    Xin, L., Dui, G., Yang, S., Zhou, D.: Solutions for behavior of a functionally graded thick-walled tube subjected to mechanical and thermal loads. Int. J. Mech. Sci. 98, 70–79 (2015)CrossRefGoogle Scholar
  23. 23.
    You, L.H., Zhang, J.J., You, X.Y.: Elastic analysis of internally pressurized thick-walled spherical pressure vessels of functionally graded materials. Int. J. Press. Vessels Pip. 82, 347–354 (2005)CrossRefGoogle Scholar
  24. 24.
    Tutuncu, N., Ozturk, M.: Exact solutions for stresses in functionally graded pressure vessels. Compos. Part B Eng. 32, 683–686 (2001)CrossRefGoogle Scholar
  25. 25.
    Shi, Z.F., Zhang, T.T., Xiang, H.J.: Exact solutions of heterogeneous elastic hollow cylinders. Compos. Struct. 79, 140–147 (2007)CrossRefGoogle Scholar
  26. 26.
    Hosseini, S.M., Akhlaghi, M.: Analytical solution in transient thermo-elasticity of functionally graded thick hollow cylinders (Pseudo-dynamic analysis). Math. Methods Appl. Sci. 32, 2019–2034 (2009)MathSciNetCrossRefzbMATHGoogle Scholar
  27. 27.
    Ozturk, A., Gulgec, M.: Elastic–plastic stress analysis in a long functionally graded solid cylinder with fixed ends subjected to uniform heat generation. Int. J. Eng. Sci. 49, 1047–1061 (2011)CrossRefGoogle Scholar
  28. 28.
    Sburlati, R.: Analytical elastic solutions for pressurized hollow cylinders with internal functionally graded coatings. Compos. Struct. 94, 3592–3600 (2012)CrossRefGoogle Scholar
  29. 29.
    Chen, Y.Z., Lin, X.Y.: Elastic analysis for thick cylinders and spherical pressure vessels made of functionally graded materials. Comput. Mater. Sci. 44, 581–587 (2008)CrossRefGoogle Scholar
  30. 30.
    Eraslan, N.A., Akis, T.: Elastoplastic response of a long functionally graded tube subjected to internal pressure. Turk. J. Eng. Environ. Sci. 29, 361–368 (2005)Google Scholar
  31. 31.
    Chen, Y.Z., Lin, X.Y.: An alternative numerical solution of thick-walled cylinders and spheres made of functionally graded materials. Comput. Mater. Sci. 48, 640–647 (2010)CrossRefGoogle Scholar
  32. 32.
    Durodola, J.F., Attia, O.: Deformation and stresses in functionally graded rotating disks. Compos. Sci. Technol. 60, 987–995 (2000)CrossRefGoogle Scholar
  33. 33.
    Dai, H.L., Jiang, H.J.: Magnetothermoelastic bending analysis of a functionally graded material cylindrical shell. Mech. Adv. Mater. Struct. 22, 281–289 (2015)CrossRefGoogle Scholar
  34. 34.
    Tarn, J.Q.: Exact solutions for functionally graded anisotropic cylinders subjected to thermal and mechanical loads. Int. J. Solids Struct. 38, 8189–8206 (2001)CrossRefzbMATHGoogle Scholar
  35. 35.
    Chen, J., Ding, H., Chen, W.: Three-dimensional analytical solution for a rotating disc of functionally graded materials with transverse isotropy. Arch. Appl. Mech. 77, 241–251 (2007)CrossRefzbMATHGoogle Scholar
  36. 36.
    Li, X.Y., Ding, H.J., Chen, W.Q.: Elasticity solutions for a transversely isotropic functionally graded circular plate subject to an axisymmetric transverse load qrk. Int. J. Solids Struct. 45, 191–210 (2008)CrossRefzbMATHGoogle Scholar
  37. 37.
    Xin, L., Lu, W., Yang, S., Ju, C., Dui, G.: Influence of linear work hardening on the elastic–plastic behavior of a functionally graded thick-walled tube. Acta Mech. 227, 2305–2321 (2016)MathSciNetCrossRefzbMATHGoogle Scholar
  38. 38.
    Xin, L., Yang, S., Zhou, D., Dui, G.: An approximate analytical solution based on the Mori–Tanaka method for functionally graded thick-walled tube subjected to internal pressure. Compos. Struct. 135, 74–82 (2016)CrossRefGoogle Scholar
  39. 39.
    Eshelby, J.D.: The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc. R. Soc. Lond. 241, 376–396 (1957)MathSciNetCrossRefzbMATHGoogle Scholar
  40. 40.
    Qu, J.M., Cherkaoui, M.: Fundamentals of Micromechanics of Solids. Wiley, New Jersey (2006)CrossRefGoogle Scholar
  41. 41.
    Li, S., Gao, X.L.: Handbook of Micromechanics and Nanomechanics. CRC Press, Singapore (2013)CrossRefGoogle Scholar
  42. 42.
    Li, S., Wang, G.: Introduction to Micromechanics and Nanomechanics. World Scientific Publishing Co. Pte. Ltd., New Jersey (2008)CrossRefzbMATHGoogle Scholar
  43. 43.
    Hill, H.: Continuum micro-mechanics of elastoplastic polycrystals. J. Mech. Phys. Solids 13, 89–101 (1965)CrossRefzbMATHGoogle Scholar

Copyright information

© Springer-Verlag GmbH Austria, part of Springer Nature 2018

Authors and Affiliations

  • Libiao Xin
    • 1
  • Guansuo Dui
    • 2
  • Dongmei Pan
    • 3
  • Yanbin Li
    • 4
  1. 1.Shanxi Key Laboratory of Material Strength and Structural Impact, College of MechanicsTaiyuan University of TechnologyTaiyuanChina
  2. 2.Institute of MechanicsBeijing Jiaotong UniversityBeijingChina
  3. 3.Department of Civil and Environmental EngineeringUniversity of HoustonHoustonUSA
  4. 4.Applied Mechanics of Materials Laboratory, Department of Mechanical EngineeringTemple UniversityPhiladelphiaUSA

Personalised recommendations