Abstract
A purely kinematic approach to the formulation of plane stress/strain triangular elements with three nodes as well as tetrahedral elements with four nodes including rotational degrees of freedom is presented. The class of elements is shown to perform comparably well in several well-established test cases. Essentially, the displacement interpolation functions are cubic allowing for more flexibility in the displacement-based formulation. The in-plane triangle can be augmented by a plate bending element to form an efficient triangular shell element.
Article PDF
Similar content being viewed by others
References
Allman, D.J.: A compatible triangular element including vertex rotations for plane strain analysis. Comput. Struct. 19, 1–8 (1984)
Allman, D.J.: Evaluation of the constant strain triangle with drilling rotations. Int. J. Numer. Methods Eng. 26, 2645–2655 (1988)
Bathe, K.J.: Finite Element Procedures. Prentice Hall, Englewood Cliffs (1996)
Bletzinger, K.U., Bischoff, M., Ramm, E.: A unified approach for shear-locking-free triangular and rectangular shell finite elements. Comput. Struct. 75, 321–334 (2000)
Bucher, C.: Computational Analysis of Randomness in Structural Mechanics. Structures and Infrastructures Book Series, vol. 3. Taylor & Francis, London (2009)
Bucher, C., Wolff, S.: slangTNG—software for stochastic structural analysis made easy. Meccanica dei Materiali e delle Strutture 3(4), 10–17 (2012)
Cook, R.D.: On the Allman triangle and related quadrilateral element. Comput. Struct. 22, 1065–1067 (1986)
Cowper, G.R.: Gaussian quadrature formulas for triangles. Int. J. Numer. Methods Eng. 7, 405–408 (1973)
Felippa, C.A.: A study of optimal membrane triangles with drilling freedoms. Comput. Methods Appl. Mech. Eng. 192, 2125–2168 (2003)
Flores, F.G.: A two-dimensional linear assumed strain triangular element for finite deformation analysis. J. Appl. Mech. 73, 970–976 (2006)
Geuzaine, C., Remacle, J.F.: Gmsh. http://geuz.org/gmsh/doc/texinfo/gmsh.html
Huang, M., Zhao, Z., Shen, C.: An effective planar triangular element with drilling rotation. Finite Elem. Anal. Des. 48, 1031–1036 (2010)
Pawlak, T.K., Yunus, S.M., Cook, R.C.: Solid elements with rotational degrees of freedom: part II—tetrahedron element. Int. J. Numer. Methods Eng. 31, 593–610 (1991)
Simo, J., Rifa, M.: A class of mixed assumed strain methods and the method of incompatible modes. Int. J. Numer. Methods Eng. 29, 1595–1683 (1990)
Tian, R., Yagawa, G.: Allman’s triangle, rotational DOF and partition of unity. Int. J. Numer. Methods Eng. 69, 837–858 (2007)
Wang, C.M.: Natural frequencies formula for simply supported Mindlin plates. J. Vib. Acoust. 116, 536–540 (1994)
Yunus, S.M., Pawlak, T.K., Cook, R.D.: Solid elements with rotational degrees of freedom: part I—hexahedron element. Int. J. Numer. Methods Eng. 31, 573–592 (1991)
Yunus, S.M., Saigal, S., Cook, R.D.: On improved hybrid finite elements with rotational degrees of freedom. Int. J. Numer. Methods Eng. 28, 785–800 (1989)
Author information
Authors and Affiliations
Corresponding author
Additional information
This paper is dedicated to the memory of Franz Ziegler.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Bucher, C. A family of triangular and tetrahedral elements with rotational degrees of freedom. Acta Mech 229, 901–910 (2018). https://doi.org/10.1007/s00707-017-2045-7
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-017-2045-7