Abstract
The problem considered in this paper concerns the edge-wave buckling phenomenon commonly encountered in forming processes such as rolling and levelling. Due to the combined action of global tensile forces and residual stresses, the elastic strips involved in these scenarios experience a symmetric short-wave deformation pattern that tends to be confined near their long edges. We use boundary-layer techniques to provide simple estimates for the critical load and the wavelength of the buckling waves. A number of complementary asymptotic features of the marginal stability curves are also reported.
Similar content being viewed by others
References
Eshelby J.D., Stroh A.N.: Dislocations in thin plates. Phil. Mag. 42, 1401–1405 (1951)
Mura, T.: On the buckling deformations of thin plates due to welding. In: Proceedings of the Third Japan National Congress for Applied Mathematics, pp. 103–106 (1953)
Mitchell L.H., Head A.K.: Buckling of a dislocated plate. J. Mech. Phys. Solids 9, 131–139 (1961)
Siems R., Delavignette P., Amelinckx S.: The buckling of a thin plate due to the presence of an edge dislocation. Phys. Status Solidi (B) 2, 421–438 (1962)
Bednarczyk H., Richter M.: Buckling of plates due to self-equilibrated thermal stresses. J. Therm. Stress. 8, 139–152 (1985)
Youtsos A.G., Mura T.: Buckling of rectangular plates under self-equilibrating stress due to dislocations. Acta Mech. 8, 139–152 (1994)
Domanti S.A., McElwain D.L.S.: Cold rolling in flat metal products: contribution of mathematical modelling. Proc. Inst. Mech. Eng. 212(Part B), 73–86 (1998)
Fischer F.D., Rammerstorfer F.G., Friedl N., Wieser W.: Buckling phenomena related to rolling and levelling of sheet metal. Int. J. Mech. Sci. 42, 1887–1910 (2000)
Jacques N., Elias A., Potier-Ferry M., Zahrouni H.: Buckling and wrinkling during strip conveying in process lines. J. Mater. Process. 190, 33–40 (2007)
Komori K.: Analysis of cross and vertical buckling in sheet metal rolling. Int. J. Mech. Sci. 12, 1235–1246 (1997)
Montmitonnet P.: Hot and cold strip rolling processes. Comput. Methods Appl. Mech. Eng. 195, 6604–6625 (2006)
Zhou Z., Thomson P.F., Lam Y.C., Yuen D.D.W.: Predicting quarter-buckling and herringbone buckling in rolled strips. Proc. I Mech. E J. Mech. Sci. 221, 143–150 (2007)
Domanti S., McElwain D.S., Middleton R.H., Edwards W.J.: The decay of stresses induced by flat rolling of metal strip. Int. J. Mech. Sci. 35, 897–907 (1993)
Fischer F.D., Rammerstorfer F.G., Friedl N.: Residual stress-induced centre wave buckling of rolled strip metal. ASME J. Appl. Mech. 70, 84–90 (2003)
Rammerstorfer F.G., Fischer F.D., Friedl N.: Buckling of free infinite strips under residual stresses and global tension. ASME J. Appl. Mech. 68, 804–809 (2001)
Coman, C.D.: The asymptotic limit of an eigenvalue problem related to the buckling of rolled elastic strips. Mech. Res. Commun. 36, 826–832 (2009)
Coman C.D., Bassom A.P.: An asymptotic description of the elastic instability of twisted thin elastic plates. Acta Mech. 200, 59–68 (2008)
Reismann R.: Elastic Plates: Theory and Applications. Wiley, New York (1988)
Coman C.D.: Secondary bifurcations and localisation in a three-dimensional buckling model. Z. Angew. Math. Phys. 55, 1050–1064 (2004)
Coman C.D., Bassom A.P.: Higher-order asymptotics for the edge-buckling of pre-stressed thin plates under in-plane bending. J. Eng. Math. 62, 327–338 (2009)
Coman C.D., Bassom A.P.: Singular behaviour in a generalised eigenvalue problem for annular plates in tension. Q. J. Mech. Appl. Math. 60, 319–336 (2007)
Coman C.D., Bassom A.P.: On the wrinkling of a pre-stressed annular thin film in tension. J. Mech. Phys. Solids 55, 1601–1617 (2007)
Segedin R.H., Collins I.F., Segedin C.M.: The elastic wrinkling of rectangular sheets. Int. J. Mech. Sci. 30, 719–732 (1988)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Coman, C.D. Edge-wave buckling of rolled elastic strips: asymptotic results. Acta Mech 211, 101–113 (2010). https://doi.org/10.1007/s00707-009-0227-7
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-009-0227-7