Abstract
The lack of detailed knowledge about the interaction of the velocity field and suspended sludge poses an obstacle in designing more effective sedimentation tanks. This study investigates the use of CFD analysis of hydraulic processes and the influence of seasonal temperature change on a waste water treatment sedimentation tank. The object analysed in this pilot research is a part of the WWTP in Nitra-Dolné Krškany, SK. The analysis was conducted using the CFD model ANSYS Fluent®, supported by field measurement data, which was gathered on two separate occasions in July 2015 and February 2016 at the sedimentation tank during operation. Three parameters were collected in 400 measurement points throughout the tank. During the research we analysed the data, looking for correlation with the CFD simulation to verify the results and correlations between the winter and summer period to determine the influence of varying temperatures.
Graphical abstract
Similar content being viewed by others
References
Burger R, Diehl S, Nopens I (2011) Water Res 45:2247
Carbery JB, Englande AJ (1983) Sludge characteristic and behavior. Martinus Nijhoff Publishers, The Hague
Deininger A, Holthausen E, Wilderer PA (1998) Water Res 32:2951
Elsässer T, Houdková L, Boráň J, Sponar J, Stehlik P (2006) Thermal dependences of physical aspects of sewage sludge. In: 17th international congress of chemical and process engineering. Process Engineering Publisher, Praha, p P5.66
Gorb Y, Mierka O (2013) J Comput Appl Math 270:443
Goula AM, Kostoglou M, Karapantsios TD, Zouboulis AI (2008) Water Res 42:3405
Holubec M (2013) CFD analysis tools for analyze WWTP objects. Dissertation thesis, Slovak University of Technology, Faculty of Civil Engineering, Slovakia
Hrudka J (2016) Analysis of waste water treatment plant objects. Dissertation thesis, Slovak University of Technology, Faculty of Civil Engineering, Slovakia
Li B, Stenstrom MK (2014) Water Res 50:160
Patziger M, Kiss K (2015) Water Sci Technol 72:1
Pollert J, Balihar O, Pavlíčková D, Todt V (2010) Optimalizace sekundárnich sedimentačních nádrží ÚČOV Praha vícefázovým modelem. In: ANSYS 2010, Praha
Groll R, Jakirlić S, Tropea C (2009) Int J Numer Methods Fluids 59:873
Ramin E, Wagner DS, Yde L, Binning P, Rasmussen MR, Mikkelsen PS, Plósz BG (2014) Water Res 66:447
Saffarian MR, Hamedi MH, Shams MH (2010) Korean J Chem Eng 27:1192
Wang S, Wang H, Xu J, Sun H (2010) Study on strategies of CFD technology application. In: International conference on computer application and system modeling. IEEE, p 225
Weerasooriya A (2013) Simulation of flow in sedimentation tank using fluent. Master’s thesis, Telemark University College, Faculty of Technology, Norway
Wicklein E, Batstone DJ, Ducoste J, Laurent J, Griborio A, Wicks J, Saunders S, Samstag R, Potier O, Nopens I (2016) Water Sci Technol 73:969
Lipeme-Kouyi G (2004) Expérimentations et modélisations tridimensionnelles de l’hydrodynamique et de la séparation particulaire des déversoirs d’orage. PhD thesis, Louis Pasteur University of Strasbourg, France
Lipeme-Kouyi G, Vazquez J, Poulet JB (2003) Flow Meas Instrum 14:79
Dufresne M, Vasquez J, Terfous A, Ghenaim A, Poulet JB (2009) Comput Fluids 38:1042
Jayanti S, Narayanan S (2004) J Environ Eng 130:37
Wei W, Bai C, Cai Y, Liu Y (2015) Chin J Appl Mech 32:788
Acknowledgements
This research was conducted with support of the Slovak research and development agency under Contract No. APVV-0372-12.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Stanko, Š., Hrudka, J., Škultétyová, I. et al. Analysis of seasonal temperature influence on hydraulic processes in a waste water sedimentation tank. Monatsh Chem 148, 489–495 (2017). https://doi.org/10.1007/s00706-016-1898-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00706-016-1898-0