Abstract
The weak planes in the sandstone bedding generate anisotropy in the mechanical behavior of the rock. These discontinuities affect both the strength and deformation behavior of sandstones. Under laboratory circumstances, it is difficult to analyze the brittle fracture mechanism and the micro-cracking process brought upon by crack initiation and propagation at the grain size. In this research, the fracture behavior and the micro-cracking process of anisotropic sandstone were studied using experimental tests and the particle flow code (PFC2D). The fracture behavior of anisotropic sandstone was modeled and confirmed by comparison with laboratory findings using bonded-particle DEM modeling and embedding weakness planes (smooth-joint model) in undamaged rock (flat-joint model). The failure process at the various inclination angles of bedding planes was examined under various loading regimes. Based on a study of the effects of changing the distance between bedding planes and the inclination angle, it was discovered that the inclination angle's influence on strength is more significant than that of spacing.
Highlights
-
Using the DEM modeling in PFC, it is possible to quantify the fracture behavior.
-
The number of cracks in intact and bedding areas determines the failure mechanism.
-
The strength is significantly affected by the inclination angle rather than spacing.
Similar content being viewed by others
References
Abousleiman YN, Hoang SK, Liu C (2014) Anisotropic porothermoelastic solution and hydro-thermal effects on fracture width in hydraulic fracturing. Int J Numer Anal Meth Geomech 38:493–517
Amadei B (1996) Importance of anisotropy when estimating and measuring in-situ stresses in rock. Int J Rock Mech Min Sci Geomech Abstr 33:293–325
Amadei B, Rogers JD, Goodman RE (1983) Elastic constants and tensile strength of anisotropic rocks. In: Proceedings of the 5th International Congress on rock mechanics, Melbourne, Australia V1:189–196
Bahaaddini M, Hagan PC, Mitra R, Hebblewhite BK (2014) Scale effect on the shear behaviour of rock joints based on a numerical study. Eng Geol 181:212–223
Bahaaddini M, Sharrock G, Hebblewhite B, Mitra R (2012) Direct shear tests to model the shear behaviour of rock joints by PFC2D. In: 46th U.S. Rock Mechanics/Geomechanics Symposium. Chicago, IL, USA, American Rock Mechanics Association
Basu A, Mishra DA, Roychowdhury K (2013) Rock failure modes under uniaxial compression, Brazilian, and point load tests. Bull Eng Geol Environ 72:457–475
Chen CS, Pan E, Amadei B (1998) Determination of deformability and tensile strength of anisotropic rock using Brazilian tests. Int J Rock Mech Min Sci 35:43–61
Chiu CC, Wang TT, Weng MC, Huang TH (2013) Modelling the anisotropic behaviour of jointed rock mass using a modified smooth-joint model. Int J Rock Mech Min Sci 62:14–22
Cho JW, Kim H, Jeon S, Min KB (2012) Deformation and strength anisotropy of Asan gneiss, Boryeong shale, and Yeoncheon schist. Int J Rock Mech Min Sci 50:158–169
Chu WJ, Zhang CS, Hou J (2013) A particle-based model for studying anisotropic strength and deformation of schist. In: Proceedings of the 3rd ISRM SINOROCK Symposium. Shanghai, China; 2013, pp 593–96
Debecker B, Vervoort A (2009) Experimental observation of fracture patterns in layered slate. Int J Fract 159(1):51–62
Debecker B, Vervoort A (2013) Two-dimensional discrete element simulations of the fracture behaviour of slate. Int J Rock Mech Min Sci 61:161–170
Duan K, Kwok CY (2015) Discrete element modelling of anisotropic rock under Brazilian test conditions. Int J Rock Mech Min Sci 78:46–56
Duan K, Jib Y, Wu W, Kwok CY (2019) Unloading-induced failure of brittle rock and implications for excavation induced strain burst. Tunn Undergr Space Technol 84:495–506
Everitt RA, Lajtai EZ (2004) The influence of rock fabric on excavation damage in the Lac du Bonnett granite. Int J Rock Mech Min Sci 41(8):1277–1303
Fjaer E, Nes OM (2013) Strength anisotropy of Mancos shale. In: Proceedings of 47th US Rock Mechanics Symposium. San Francisco, US; 2013. Paper ARMA 13–519
Fu H, Zhang J, Huang Z, Shi Y, Chen W (2018) A statistical model for predicting the triaxial compressive strength of transversely isotropic rocks subjected to freeze–thaw cycling. Cold Reg Sci Technol 145:237–248
Gholami R, Rasouli V (2014) Mechanical and elastic properties of transversely isotropic slate. Rock Mech Rock Eng 47:1763–1773
Gong QM, Zhao J, Jiao YY (2005) Numerical modelling of the effects of joint orientation on rock fragmentation by TBM cutters. Tunn Undergr Sp Technol 20:183–191
Hakala M, Kuula H, Hudson JA (2007) Estimating the transversely isotropic elastic intact rock properties for in situ stress measurement data reduction: a case study of the Olkiluoto mica gneiss, Finland. Int J Rock Mech Min Sci 44(1):14–46
ISRM (1981) The complete ISRM suggested methods for rock characterization, testing and monitoring, edited by Brown. Pergamon Press, Oxford
Itasca Consulting Group Inc. (2014) PFC2D-Particle Flow Code in 2 Dimensions, Version 5 2014 Minneapolis, MN, 40 USA
Jaeger JC, Cook NGW (1976) Fundamentals of rock mechanics, 3rd edn. Chapman & Hall, London
Jiang Q, Feng XT, Hatzor YH, Hao XJ, Li SJ (2014) Mechanical anisotropy of columnar jointed basalts: an example from the Baihetan hydropower station. China Eng Geol 175:35–45
Khanlari GR, Heidari M, Sepahigero AA, Fereidooni D (2014) Quantification of strength anisotropy of metamorphic rocks of the Hamedan province, Iran, as determined from cylindrical punch, point load and Brazilian tests. Eng Geol 169:80–90
Kim H, Cho JW, Song I, Min KB (2012) Anisotropy of elastic moduli, P-wave velocities, and thermal conductivities of Asan Gneiss, Boryeong Shale, and Yeoncheon Schist in Korea. Eng Geol 147:68–77
Klein E, Baud P, Reuschle T, Wong TF (2001) Mechanical behavior and failure mode of Bensteim sandstone under triaxial compression. Phys Chem Earth 26:21–25
Kulatilake PHSW, Malama B, Wang J (2001) Physical and particle flow modelling of jointed rock block behaviour under uniaxial loading. Int J Rock Mech Min Sci 38(5):641–657
Kundu J, Mahanta B, Sarkar K, Singh TN (2018) The effect of lineation on anisotropy in dry and saturated Himalayan schistose rock under Brazilian test conditions. Rock Mech Rock Eng 51:5–21
Li KH, Cheng YM, Yin ZY, Han DY, Meng JJ (2020) Size effects in a transversely isotropic rock under Brazilian tests: laboratory testing. Rock Mech Rock Eng 53:2623–2642
Lisjak A, Grasselli G, Vietor T (2014) Continuum-discontinuum analysis of failure mechanisms around unsupported circular excavations in anisotropic clay shales. Int J Rock Mech Min Sci 65:96–115
Liu ZN, Xu HR, Zhao ZH, Chen ZW (2018) DEM modelling of interaction between the propagating fracture and multiple pre-existing cemented discontinuities in shale. Rock Mech Rock Eng 52:1993–2001
Ma CC, Li TB, Xin HL, Zhang H, Wang MJ, Liu TY, Chen GQ, Chen ZQ (2016) Brittle rock modelling approach and its validation using excavation-induced micro-seismicity. Rock Mech Rock Eng 49:3175–3188
Maji VB (2011) Understanding failure mode in uniaxial and triaxial compression for a hard brittle rock. In: Proceedings of the 12th ISRM International Congress on rock mechanics. CRC Press/ Balkema, Leiden, pp 723–726
Meier T, Rybacki E, Backers T, Dresen G (2014) Influence of bedding angle on borehole stabilit : a laboratory investigation of transversely isotropic oil shale. Rock Mech Rock Eng 48:1535–1546
Min KB, Lee CI, Choi HM (2003) An experimental and numerical study of the in situ stress measurement on transversely isotropic rock by overcoring method. In: Proceedings of the third International Symposium on rock stress. Kumamoto, Japan, pp 189–195
Niandou H, Shao JF, Henry JP, Fourmaintraux D (1997) Laboratory investigation of the mechanical behaviour of Tournemire shale. Int J Rock Mech Min Sci 34(1):3–16
Okland D, Hydro N, Cook JM (1998) Bedding-related borehole instability in high- angle wells. In: Proceedings of EUROCK ‘98—rock mechanics in petroleum engineering. Trondheim, Norway; 1998. Paper SPE/ISRM 47285
Ozcelik Y, Yilmazkaya E (2011) The effect of the rock anisotropy on the efficiency of diamond wire cutting machines. Int J Rock Mech Min Sci 48:626–636
Park B, Min KB (2015) Bonded-particle discrete element modelling of mechanical behaviour of transversely isotropic rock. Int J Rock Mech Min Sci 76:243–255
Park ES, Martin CD, Christiansson R (2004) Simulation of the mechanical behaviour of discontinuous rock masses using a bonded-particle model. In: Gulf Rocks 2004, the 6th North America Rock Mechanics Symposium (NARMS). Houston, Texas, American Rock Mechanics Association.
Pierce M, Cundall P, Potyondy D, Mas Ivars D (2007) A synthetic rock mass model for jointed rock. In: Rock Mechanics: Meeting Societys Challenges and Demands, 1st Canada-U.S. Rock Mechanics Symposium. Vancouver, London, Taylor & Francis Group
Potyondy DO, Cundall P (2004) A bonded-particle model for rock. Int J Rock Mech Min Sci 41(8):1329–1364
Potyondy DO (2011) Parallel-bond refinements to match macro-properties of hard rock. In: Proceedings of the Second International FLAC/DEM Symposium, Melbourne, Itasca, 2011, pp 459–465
Potyondy DO (2019) “Material-Modelling Support in PFC [fistPkg6.5],” Itasca Consulting Group, Inc., Technical Memorandum ICG7766-L (April 5, 2019), Minneapolis, Minnesota
Rabat R, Cano M, Tomás R, Tamayo AE, Alejano LR (2020) Evaluation of strength and deformability of soft sedimentary rocks in dry and saturated conditions through needle penetration and point load tests: a comparative study. Rock Mech Rock Eng 53:2707–2726
Rabat A, Tomas R, Cano M (2021) Advances in the understanding of the role of degree of saturation and water distribution in mechanical behaviour of calcarenites using magnetic resonance imaging technique. Constr Build Mater 303:124420
Rabat A, Tomás R, Cano M, Pérez-Rey I, Siles JS, Alejano LR (2022) Influence of water content on the basic friction angle of porous limestones—experimental study using an automated tilting table. Bull Eng Geol Env 81:223
Rabat A, Tomas R, Cano M (2023) Assessing water-induced changes in tensile behaviour of porous limestones by means of uniaxial direct pull test and indirect methods. Eng Geol 313:106962
Ramamurthy T, Venkatappa RG, Singh J (1993) Engineering behaviour of phyllite. Eng Geol 33:209–225
Santarelli FJ, Brown ET (1989) Failure of three sedimentary rocks in triaxial and hollow cylinder compression tests. Int J Rock Mech Min Sci Geomech Abstr 26:401–413
Shang J, Hencher SR, West LJ (2016) Tensile strength of geological discontinuities including incipient bedding, rock joints and mineral veins. Rock Mech Rock Eng 49:4213–4225
Song I, Suh M, Woo YK, Hao T (2004) Determination of the elastic modulus set of foliated rocks from ultrasonic velocity measurements. Eng Geol 72(3–4):293–308
Szwedzicki T (2007) A hypothesis on modes of failure of rock samples tested in uniaxial compression rock mech. Rock Eng 40(1):97–104
Szwedzicki T, Shamu W (1996) Detection of planes of weakness in rock samples using nondestructive testing method. In: Proc., ’96 International Symposium on mining science and technology, China. AA Balkema, Rotterdam, pp 759–763
Tan X, Konietzky H, Fruhwirt T, Dan DQ (2015) Brazilian tests on transversely isotropic rocks: laboratory testing and numerical simulations. Rock Mech Rock Eng 48:1341–1351
Tavallali A, Vervoort A (2010) Effect of layer orientation on the failure of layered sandstone under Brazilian test conditions. Int J Rock Mech Min Sci 47(2):313–322
Tien YM, Kuo MC, Juang CH (2006) An experimental investigation of the failure mechanism of simulated transversely isotropic rocks. Int J Rock Mech Min Sci 43(8):1163–1181
Tsang CF, Barnichon JD, Birkholzer J, Li XL, Liu HH, Sillen X (2012) Coupled thermo-hydro-mechanical processes in the near field of a high-level radioactive waste repository in clay formations. Int J Rock Mech Min Sci 49:31–44
Valente S, Fidelibus C, Loew S, Cravero M, Iabichino G, Barpi F (2012) Analysis of fracture mechanics tests on Opalinus Clay. Rock Mech Rock Eng 45:767–779
Wang C, Tannant DD, Lilly PA (2003) Numerical analysis of the stability of heavily jointed rock slopes using PFC2D. Int J Rock Mech Min Sci 40(3):415–424
Wang T, Xu D, Elsworth D (2016) Distinct element modelling of strength variation in jointed rock masses under uniaxial compression. Geomech Geophys Geo-Energ Geo-Resour 2:11–24
Wu S, Xu X (2016) A study of three intrinsic problems of the classic discrete element method using flat-joint model. Rock Mech Rock Eng 49:1813–1830
Xu G, He C, Chen Z (2018a) Transverse isotropy of phyllite under Brazilian tests: laboratory testing and numerical simulations. Rock Mech Rock Eng 51:1111–1135
Xu G, He C, Chen Z (2018b) Effects of the micro-structure and micro-parameters on the mechanical behaviour of transversely isotropic rock in Brazilian tests. Acta Geotech 13:887–910
Xu G, He C, Wang X (2020) Mechanical behaviour of transversely isotropic rocks under uniaxial compression governed by micro-structure and micro-parameters. Bull Eng Geol Environ 79:1979–2004
Yin PF, Yang SQ (2018) Experimental investigation of the strength and failure behaviour of layered sandstone under uniaxial compression and Brazilian testing. Acta Geophys 66:585–605
Zeng QD, Yao J, Shao JF (2018) Numerical study of hydraulic fracture propagation accounting for rock anisotropy. J Petroleum Sci Eng 160:422–432
Zhang J (2013) Borehole stability analysis accounting for anisotropies in drilling to weak bedding planes. Int J Rock Mech Min Sci 60:160–170
Zhang F, Dontsov E, Mack M (2017) Fully coupled simulation of a hydraulic fracture interacting with natural fractures with a hybrid discrete-continuum method. Int J Numer Anal Meth Geomech 41:1430–1452
Zoback MD, Barton CA, Brudy M, Castillo DA, Finkbeiner T, Grollimund BR (2003) Determination of stress orientation and magnitude in deep wells. Int J Rock Mech Min Sci 40(7):1049–1076
Zuo JP, Wei X, Shi Y, Liu C, Li M, Wong RHC (2020) Experimental study of the ultrasonic and mechanical properties of a naturally fractured limestone. Int J Rock Mech Min Sci 125:104162
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Noori, M., Khanlari, G., Sarfarazi, V. et al. An Experimental and Numerical Study of Layered Sandstone's Anisotropic Behaviour Under Compressive and Tensile Stress Conditions. Rock Mech Rock Eng 57, 1451–1470 (2024). https://doi.org/10.1007/s00603-023-03628-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-023-03628-1