Data availability
All relavent data is provided as a supplumentary Table S1 of Chen and Zhang (2022).
References
Burland JB, Lord JA (1970) The load deformation behavior of middle Chalk at Mundford, Norfolk: a comparison between full-scale performance and in situ and laboratory measurements. Proceedings of Conference on in situ Investigations in Soils and Rocks, 1969. British Geotechnical Society, London, pp 3–15
Chen HH, Zhang LY (2022) A Machine Learning-Based Method for Predicting End-Bearing Capacity of Rock-Socketed Shafts. Rock Mech Rock Eng 55(3):1743-1757. https://doi.org/10.1007/s00603-021-02757-9
Gharsallaoui H, Jafari M, Holeyman A (2020) Pile end bearing capacity in rock mass using cavity expansion theory. J Rock Mech Geotech Eng 12:1103–1111
Ghorbani B, Arulrajah A, Narsilio G, Horpibulsuk S (2020) Experimental investigation and modelling the deformation properties of demolition wastes subjected to freeze–thaw cycles using ANN and SVR. Construct Build Mater 258:119688
Horvath RG (1982) Drilled piers socketed into weak shale-methods of improving performance. PhD dissertation, University of Toronto, Toronto, ON, Canada
Jubenville MD, Hepworth RC (1981) Drilled pier foundations in shale—Denver, Colorado, area. Drilled Piers and Caissons. Proceeding Session at the ASCE National Convention, St. Louis, Missouri, pp 66–81
Lake LM, Simons NE (1970) Investigations into the engineering properties of chalk at Welford Theale, Berkshire. Proceedings of conference on in situ investigations into soils and rocks. British Geotechnical Society, London, pp 23–29
Lord JA (1997) Foundations, Excavations and retaining structures. In: The geotechnics of hard soils-soft rocks: proceedings of the second international symposium on hard soils–soft rocks, Athens Greece, pp 1949–1956
Maleki H, Hollberg K (1995) Structural stability assessment through measurements. In: Proceedings of ISRM International Workshop on Rock Foundations, Tokyo, Japan, pp 449–455
Mallard DJ (1977) Discussion: Session 1—Chalk. In: Proceedings of ICE Conference on Piles in Weak Rock, pp. 177–180
McVay MC, Ko J, Otero J (2006) Distribution of End Bearing and Tip Shearing on Drilled Shafts in Florida Limestone. 2006 Geotechnical Research in Progress Meeting, Florida Department of Transportation, August 16th, Florida
Pellegrino A (1974) Surface Footings on Soft Rocks. In: Proceedings, 3rd Congress of International Society for Rock Mechanics (2), Denver, Colorado, pp 733–738
Pells PJN, Turner RM (1979) Elastic solutions for the design and analysis of rock socketed piles. Can Geotech J 16:481–487
Pells PJN, Turner RM (1980) End bearing on rock with particular reference to sandstone. Proc Int Conf Struct Foundation Rock Syd 1:181–190
Rehnman S, Broms BB (1971) Bearing capacity of piles driven into rock. Can Geotech J 8(2):151–162
Spanovich M, Garvin RG (1979) Field evaluation of caisson-shale interaction. Behavior of deer, foundations (STP 670). Ed. R. Lundgren ASTM, pp 537–557
Tajeri S, Sadrossadat E, Bazaz JB (2015) Indirect estimation of the ultimate bearing capacity of shallow foundations resting on rock masses. Int J Rock Mech Min Sci 80:107–117
Thorne CP (1980) Capacity of Piers Drilled into Rock. In: Proceedings, International conference on structural foundations on rock, Sydney, pp. 223–233
Ward WH, Burland JB (1968) Assessment of the Deformation Properties of Jointed Rock in the Mass. In: Proceedings of the international symposium on rock mechanics, October 22nd-24th, Madrid, Spain, pp 35–44
Williams AF (1980) The design and performance of piles socketed into weak rock. PhD dissertation, Monash University, Melbourne, Australia.
Zhang L (2016) Engineering Properties of Rocks, 2nd edn. Elsevier, Butterworth-Heinemann, p 378
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Chen, H., Zhang, L. Reply to Discussion on “A Machine Learning‑Based Method for Predicting End‑Bearing Capacity of Rock‑Socketed Shafts” [Rock Mech Rock Eng 55, 1743–1757]. Rock Mech Rock Eng 56, 6169–6171 (2023). https://doi.org/10.1007/s00603-023-03365-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-023-03365-5