Abstract
Fluid–shale interaction mechanisms and their implications on shale mechanical property evolutions are essential for both shale gas exploitation and CO2 sequestration. To understand the potential influence of water and CO2 exposure on shale, three shale samples from different formations were treated with dry supercritical CO2, supercritical CO2–water, and pure water for up to 30 days. Nanoindentation was used to measure the localized elastic modulus and hardness before and after fluid treatments. Combined nanoindentation with XRD–SEM–EDS analysis, we obtained the probing mechanical properties of three mineral phases in shales: quartz, organic matter, and mixed composites. The mechanical properties and creep behaviors of the mineral phases before and after fluid treatment were analyzed. XRD analysis and nanoindentation results reveal that the three shales are distinct in mineralogy and mechanical properties. The mechanical heterogeneity is related to the mineral constituents, which can be observed in the deconvolution results. The fluid treatment results indicate that dry supercritical CO2 does not impair the nanomechanical properties of shale, whereas water-contained fluid shows a significant weakening effect. The mechanical evolution of shale is both time-dependent and mineralogy-related. After supercritical CO2 and water treatment, the maximum deformations of three shales demonstrate an increasing trend, indicating a deterioration of the resistance to load. The elastic moduli and hardness of quartz, organic matter, and mixed composites exhibit apparent decreases after fluid treatment. The time-dependent mechanical behaviors of mineral phases were analyzed. CO2 and water play critical roles in the reactions with shale and the involved mineral reactions are discussed. The experimental findings provide insight into the nanomechanical property evolutions of shale in field operations involved in CO2 and water, such as fracturing and CO2 sequestration.
Highlights
-
Shale mechanical property evolutions in fluid–shale interaction were traced on the nano-to-micron scale.
-
Nanoindentation combined with XRD, SEM, and EDS was adopted to obtain the nanomechanical properties of mineral phases.
-
The deformation of shales and creep behaviors of mineral phases were analyzed.
-
The mechanical alteration after dry supercritical CO2 exposure was inapparent while significant when water exists.
This is a preview of subscription content, log in via an institution to check access.
Access this article
We’re sorry, something doesn't seem to be working properly.
Please try refreshing the page. If that doesn't work, please contact support so we can address the problem.
Similar content being viewed by others
References
Abedi S, Slim M, Ulm FJ (2016) Nanomechanics of organic-rich shales: the role of thermal maturity and organic matter content on texture. Acta Geotech 11:775–787. https://doi.org/10.1007/s11440-016-0476-2
Anderson RL, Ratcliffe I, Greenwell HC et al (2010) Clay swelling—a challenge in the oilfield. Earth Sci Rev 98:201–216. https://doi.org/10.1016/j.earscirev.2009.11.003
Ao X, Lu Y, Tang J et al (2017) Investigation on the physics structure and chemical properties of the shale treated by supercritical CO2. J CO2 Util 20:274–281. https://doi.org/10.1016/j.jcou.2017.05.028
Barati R, Liang JT (2014) A review of fracturing fluid systems used for hydraulic fracturing of oil and gas wells. J Appl Polym Sci 131:1–11. https://doi.org/10.1002/app.40735
Bennett KC, Berla LA, Nix WD, Borja RI (2015) Instrumented nanoindentation and 3D mechanistic modeling of a shale at multiple scales. Acta Geotech 10:1–14. https://doi.org/10.1007/s11440-014-0363-7
Bobko C, Ulm FJ (2008) The nano-mechanical morphology of shale. Mech Mater 40:318–337. https://doi.org/10.1016/j.mechmat.2007.09.006
Cai C, Wang X, Yuan X et al (2019) Experimental investigation on perforation of shale with ultra-high pressure abrasive water jet: shape, mechanism and sensitivity. J Nat Gas Sci Eng 67:196–213. https://doi.org/10.1016/j.jngse.2019.05.002
Cała M, Cyran K, Kawa M et al (2017) Identification of microstructural properties of shale by combined use of X-ray micro-CT and nanoindentation tests. Procedia Eng 191:735–743. https://doi.org/10.1016/j.proeng.2017.05.239
Crundwell FK (2017) On the mechanism of the dissolution of quartz and silica in aqueous solutions. ACS Omega 2:1116–1127. https://doi.org/10.1021/acsomega.7b00019
Doerner MF, Nix WD (1986) A method for interpreting the data from depth-sensing indentation instruments. J Mater Res 1:601–609
Domnich V, Gogotsi Y, Dub S (2000) Effect of phase transformations on the shape of the unloading curve in the nanoindentation of silicon. Appl Phys Lett 76:2214–2216
Donnelly E, Baker SP, Boskey AL, van der Meulen MCH (2006) Effects of surface roughness and maximum load on the mechanical properties of cancellous bone measured by nanoindentation. J Biomed Mater Res Part A an off J Soc Biomater Jpn Soc Biomater Aust Soc Biomater Korean Soc Biomater 77:426–435
Elkady Y, Kovscek AR (2020) Multiscale study of CO2 impact on fluid transport and carbonate dissolution in Utica and Eagle Ford shale. J Pet Sci Eng. https://doi.org/10.1016/j.petrol.2020.107867
Erguler ZA, Ulusay R (2009) Water-induced variations in mechanical properties of clay-bearing rocks. Int J Rock Mech Min Sci 46:355–370. https://doi.org/10.1016/j.ijrmms.2008.07.002
Feng G, Kang Y, Sun Z, dong, et al (2019) Effects of supercritical CO2 adsorption on the mechanical characteristics and failure mechanisms of shale. Energy 173:870–882. https://doi.org/10.1016/j.energy.2019.02.069
Ferm JC (1955) Radioactivity of coals and associated rocks in Beaver, Clearfield, and Jefferson Counties, Pennsylvania. The Survey
Fischer-Cripps AC, Nicholson DW (2004) Nanoindentation. Mechanical engineering series. Appl Mech Rev 57:B12–B12
Goodman A, Kutchko B, Sanguinito S et al (2021) Reactivity of CO2 with Utica, Marcellus, Barnett, and Eagle Ford Shales and impact on permeability. Energy Fuels. https://doi.org/10.1021/acs.energyfuels.1c01995
Graham SP, Rouainia M, Aplin AC et al (2020) Geomechanical characterisation of organic-rich calcareous shale using AFM and nanoindentation. Rock Mech Rock Eng. https://doi.org/10.1007/s00603-020-02261-6
Hatch J, Jacobson R, Mastalerz M et al (2002) Resource assessment of the Springfield, Herrin, Danville, and Baker coals in the Illinois Basin
Hu Y, Kang Y, Wang X et al (2016) Experimental and theoretical analysis of a supercritical carbon dioxide jet on wellbore temperature and pressure. J Nat Gas Sci Eng 36:108–116. https://doi.org/10.1016/j.jngse.2016.10.014
Hu Y, Liu Y, Cai C et al (2017) Fracture initiation of an inhomogeneous shale rock under a pressurized supercritical CO2 jet. Appl Sci. https://doi.org/10.3390/app7101093
Huang Z, Kong F, Li Y et al (2020) Advanced treatment of effluent from municipal wastewater treatment plant by strengthened ecological floating bed. Bioresour Technol 309:123358
Jackson RE, Gorody AW, Mayer B et al (2013) Groundwater protection and unconventional gas extraction: the critical need for field-based hydrogeological research. Groundwater 51:488–510
Jarboe PJ, Candela PA, Zhu W, Kaufman AJ (2015) Extraction of hydrocarbons from high-maturity marcellus shale using supercritical carbon dioxide. Energy Fuels 29:7897–7909
Jew AD, Dustin MK, Harrison AL et al (2017) Precipitation of iron during hydraulic fracturing of shale. Energy Fuels. https://doi.org/10.1021/acs.energyfuels.6b03220
Jiang Y, Luo Y, Lu Y et al (2016) Effects of supercritical CO2 treatment time, pressure, and temperature on microstructure of shale. Energy 97:173–181. https://doi.org/10.1016/j.energy.2015.12.124
Kutchko B, Sanguinito S, Natesakhawat S et al (2020) Quantifying pore scale and matrix interactions of SCCO2 with the Marcellus shale. Fuel 266:116928. https://doi.org/10.1016/j.fuel.2019.116928
Kwak JH, Hu JZ, Turcu RVF et al (2011) The role of H2O in the carbonation of forsterite in supercritical CO2. Int J Greenh Gas Control 5:1081–1092. https://doi.org/10.1016/j.ijggc.2011.05.013
Li X, Bhushan B (2002) A review of nanoindentation continuous stiffness measurement technique and its applications. Mater Charact 48:11–36. https://doi.org/10.1016/S1044-5803(02)00192-4
Li C, Ostadhassan M, Kong L, Bubach B (2019) Multi-scale assessment of mechanical properties of organic-rich shales: a coupled nanoindentation, deconvolution analysis, and homogenization method. J Pet Sci Eng 174:80–91
Liu K, Ostadhassan M, Bubach B (2016) Applications of nano-indentation methods to estimate nanoscale mechanical properties of shale reservoir rocks. J Nat Gas Sci Eng 35:1310–1319. https://doi.org/10.1016/j.jngse.2016.09.068
Liu J, Yao Y, Liu D, Elsworth D (2017) Experimental evaluation of CO2 enhanced recovery of adsorbed-gas from shale. Int J Coal Geol 179:211–218. https://doi.org/10.1016/j.coal.2017.06.006
Liu K, Ostadhassan M, Bubach B et al (2018a) Statistical grid nanoindentation analysis to estimate macro-mechanical properties of the Bakken Shale. J Nat Gas Sci Eng 53:181–190. https://doi.org/10.1016/j.jngse.2018.03.005
Liu K, Ostadhassan M, Bubach B et al (2018b) Nano-dynamic mechanical analysis (nano-DMA) of creep behavior of shales: Bakken case study. J Mater Sci 53:4417–4432. https://doi.org/10.1007/s10853-017-1821-z
Liu Y, Liu S, Kang Y (2021) Probing nanomechanical properties of a shale with nanoindentation: heterogeneity and the effect of water–shale interactions. Energy Fuels. https://doi.org/10.1021/acs.energyfuels.1c01328
Loucks RG, Reed RM, Ruppel SC, Hammes U (2012) Spectrum of pore types and networks in mudrocks and a descriptive classification for matrix-related mudrock pores. Am Assoc Pet Geol Bull 96:1071–1098. https://doi.org/10.1306/08171111061
Lu J, Nicot JP, Mickler PJ et al (2016a) Alteration of Bakken reservoir rock during CO2-based fracturing—an autoclave reaction experiment. J Unconv Oil Gas Resour 14:72–85. https://doi.org/10.1016/j.juogr.2016.03.002
Lu Y, Ao X, Tang J et al (2016b) Swelling of shale in supercritical carbon dioxide. J Nat Gas Sci Eng 30:268–275. https://doi.org/10.1016/j.jngse.2016.02.011
Lu Y, Li Y, Wu Y et al (2020) Characterization of shale softening by large volume-based nanoindentation. Rock Mech Rock Eng 53:1393–1409. https://doi.org/10.1007/s00603-019-01981-8
Luo S, Lu Y, Wu Y et al (2020) Cross-scale characterization of the elasticity of shales: Statistical nanoindentation and data analytics. J Mech Phys Solids 140:103945. https://doi.org/10.1016/j.jmps.2020.103945
Lyu Q, Ranjith PG, Long X, Ji B (2016) Experimental investigation of mechanical properties of black shales after CO2-water–rock interaction. Materials (basel). https://doi.org/10.3390/ma9080663
Lyu Q, Long X, Ranjith PG et al (2018) Experimental investigation on the mechanical properties of a low-clay shale with different adsorption times in sub-/super-critical CO2. Energy 147:1288–1298. https://doi.org/10.1016/j.energy.2018.01.084
Lyu Q, Wang K, Wanniarachchi WAM et al (2020) Hydro-mechanical properties of a low-clay shale with supercritical CO2 imbibition. Geomech Geophys Geo-Energy Geo-Resour 6:1–14. https://doi.org/10.1007/s40948-020-00200-x
Manjunath GL, Jha B (2019) Geomechanical characterization of Gondwana shale across nano-micro-meso scales. Int J Rock Mech Min Sci 119:35–45. https://doi.org/10.1016/j.ijrmms.2019.04.003
Mba K, Prasad M (2010) Mineralogy and its contribution to anisotropy and kerogen stiffness variations with maturity in the Bakken shales. Soc Explor Geophys Int Expo 80th Annu Meet 2010. SEG 2010:2612–2616. https://doi.org/10.1190/1.3513383
Middleton R, Viswanathan H, Currier R, Gupta R (2014) CO2 as a fracturing fluid: potential for commercial-scale shale gas production and CO2 sequestration. Energy Procedia 63:7780–7784. https://doi.org/10.1016/j.egypro.2014.11.812
Middleton RS, Carey JW, Currier RP et al (2015) Shale gas and non-aqueous fracturing fluids: opportunities and challenges for supercritical CO2. Appl Energy 147:500–509. https://doi.org/10.1016/j.apenergy.2015.03.023
Mighani S, Taneja S, Sondergeld CH, Rai CS (2015) Nanoindentation creep measurements on shale. In: 49th US rock mechanics/geomechanics symposium
Miller JD, Nalaskowski J, Abdul B, Du H (2007) Surface characteristics of kaolinite and other selected two layer silicate minerals. Can J Chem Eng 85:617–624
Nesbitt HW, Young GM (1984) Prediction of some weathering trends of plutonic and volcanic rocks based on thermodynamic and kinetic considerations. Geochim Cosmochim Acta 48:1523–1534. https://doi.org/10.1016/0016-7037(84)90408-3
Oliver WC, Pharr GM (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7:1564–1583. https://doi.org/10.1557/JMR.1992.1564
Osborn SG, Vengosh A, Warner NR, Jackson RB (2011) Methane contamination of drinking water accompanying gas-well drilling and hydraulic fracturing. Proc Natl Acad Sci 108:8172–8176
Pan Z, Connell LD (2007) A theoretical model for gas adsorption-induced coal swelling. Int J Coal Geol 69:243–252. https://doi.org/10.1016/j.coal.2006.04.006
Pan Y, Hui D, Luo P et al (2018) Influences of subcritical and supercritical CO2 treatment on the pore structure characteristics of marine and terrestrial shales. J CO2 Util 28:152–167. https://doi.org/10.1016/j.jcou.2018.09.016
Perera MSA, Ranjith PG, Choi SK, Airey D (2011) The effects of sub-critical and super-critical carbon dioxide adsorption-induced coal matrix swelling on the permeability of naturally fractured black coal. Energy 36:6442–6450. https://doi.org/10.1016/j.energy.2011.09.023
Pharr GM, Oliver WC (1992) Measurement of thin film mechanical properties using nanoindentation. MRS Bull 17:28–33. https://doi.org/10.1557/S0883769400041634
Puglio DG, Iannacchione AT (1979) Geology, mining, and methane content of the Freeport and Kittanning coalbeds in Indiana and surrounding counties, Pa. Department of the Interior, Bureau of Mines
Randall NX, Vandamme M, Ulm F-J (2009) Nanoindentation analysis as a two-dimensional tool for mapping the mechanical properties of complex surfaces. J Mater Res 24:679–690
Rubin ES, Davison JE, Herzog HJ (2015) The cost of CO2 capture and storage. Int J Greenh Gas Control 40:378–400
Saha R, Nix WD (2002) Effects of the substrate on the determination of thin film mechanical properties by nanoindentation. Acta Mater 50:23–38
Sang G, Liu S, Elsworth D (2019) Water vapor sorption properties of Illinois shales under dynamic water vapor conditions: experimentation and modeling. Water Resour Res 55:7212–7228
Sang G, Liu S, Elsworth D et al (2020a) Pore-scale water vapor condensation behaviors in shales: an experimental study. Transp Porous Media 135:713–734
Sang G, Liu S, Elsworth D et al (2020b) Evaluation and modeling of water vapor sorption and transport in nanoporous shale. Int J Coal Geol 228:103553
Sanguinito S, Goodman A, Tkach M et al (2018) Quantifying dry supercritical CO2-induced changes of the Utica Shale. Fuel 226:54–64. https://doi.org/10.1016/j.fuel.2018.03.156
Schieber J (2010) Common themes in the formation and preservation of intrinsic porosity in shales and mudstones—illustrated with examples across the phanerozoic. SPE Unconv Gas Conf 2010:428–437. https://doi.org/10.2118/132370-ms
Shadizadeh SR, Moslemizadeh A, Dezaki AS (2015) A novel nonionic surfactant for inhibiting shale hydration. Appl Clay Sci 118:74–86
Sheng M, Cheng S, Lu Z et al (2019) Multi-scale assessment of plasticity of organic-rich shale: from core scale to mineral scale. SPE/AAPG/SEG Asia Pacific Unconv Resour Technol Conf 2019, APUR 2019. https://doi.org/10.15530/ap-urtec-2019-198313
Shi X, Jiang S, Wang Z et al (2020) Application of nanoindentation technology for characterizing the mechanical properties of shale before and after supercritical CO2 fluid treatment. J CO2 Util 37:158–172. https://doi.org/10.1016/j.jcou.2019.11.022
Shukla P, Kumar V, Curtis M et al (2013) Nanoindentation studies on shales. 47th US Rock Mech/Geomech Symp 2013, vol 2, pp 1194–1203
Sone H, Zoback MD (2013) Mechanical properties of shale-gas reservoir rocks—part 1: static and dynamic elastic properties and anisotropy. Geophysics. https://doi.org/10.1190/GEO2013-0050.1
Suter JL, Coveney PV, Anderson RL et al (2011) Rule based design of clay-swelling inhibitors. Energy Environ Sci 4:4572–4586
Tian S, Zhang P, Sheng M et al (2020) Modification of microscopic properties of shale by carbonic acid treatment: implications for CO2-based fracturing in shale formations. Energy Fuels 34:3458–3466. https://doi.org/10.1021/acs.energyfuels.9b03772
Varga M, Leroch S, Eder SJ, Ripoll MR (2017) Meshless microscale simulation of wear mechanisms in scratch testing. Wear 376:1122–1129
Veytskin YB, Tammina VK, Bobko CP et al (2017) Micromechanical characterization of shales through nanoindentation and energy dispersive X-ray spectrometry. Geomech Energy Environ 9:21–35. https://doi.org/10.1016/j.gete.2016.10.004
Wang X, Alvarado V, Swoboda-Colberg N, Kaszuba JP (2013) Reactivity of dolomite in water-saturated supercritical carbon dioxide: significance for carbon capture and storage and for enhanced oil and gas recovery. Energy Convers Manag 65:564–573. https://doi.org/10.1016/J.ENCONMAN.2012.07.024
Warpinski NR, Mayerhofer MJ, Vincent MC et al (2009) Stimulating unconventional reservoirs: maximizing network growth while optimizing fracture conductivity. J Can Pet Technol 48:39–51. https://doi.org/10.2118/114173-PA
Wu W, Sharma MM (2017) Acid fracturing in shales: effect of dilute acid on properties and pore structure of shale. SPE Prod Oper 32:51–63. https://doi.org/10.2118/173390-pa
Wu W, Zoback MD, Kohli AH (2017) The impacts of effective stress and CO2 sorption on the matrix permeability of shale reservoir rocks. Fuel 203:179–186. https://doi.org/10.1016/j.fuel.2017.04.103
Yang C, Xiong Y, Wang J et al (2020) Mechanical characterization of shale matrix minerals using phase-positioned nanoindentation and nano-dynamic mechanical analysis. Int J Coal Geol 229:103571. https://doi.org/10.1016/j.coal.2020.103571
Yin H, Zhou J, Jiang Y et al (2016) Physical and structural changes in shale associated with supercritical CO2 exposure. Fuel 184:289–303. https://doi.org/10.1016/j.fuel.2016.07.028
Yin H, Zhou J, Xian X et al (2017) Experimental study of the effects of sub- and super-critical CO2 saturation on the mechanical characteristics of organic-rich shales. Energy 132:84–95. https://doi.org/10.1016/j.energy.2017.05.064
Zhang Y, Lashgari HR, Sepehrnoori K, Di Y (2017) Effect of capillary pressure and salinity on CO2 solubility in brine aquifers. Int J Greenh Gas Control 57:26–33
Zhang G, Ranjith PG, Perera MSA et al (2019) Quantitative analysis of micro-structural changes in a bituminous coal after quantitative analysis of micro-structural changes in a bituminous coal after exposure to supercritical CO2 and water. Nat Resour Res 28:1639–1660. https://doi.org/10.1007/s11053-019-09463-y
Zhao J, Zhang W, Zhang D et al (2020) Influence of geochemical features on the mechanical properties of organic matter in shale. J Geophys Res Solid Earth. https://doi.org/10.1029/2020JB019809
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Liu, Y., Liu, S., Liu, A. et al. Determination of Mechanical Property Evolutions of Shales by Nanoindentation and High-Pressure CO2 and Water Treatments: A Nano-to-Micron Scale Experimental Study. Rock Mech Rock Eng 55, 7629–7655 (2022). https://doi.org/10.1007/s00603-022-03059-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-022-03059-4