Abstract
Rockfall is a natural hazard that needs to be rigorously managed along all the major road and railways transport networks by identifying the most appropriate mitigation measures. There has been significant progress in rockfall modelling and rockfall protection systems in recent years but there remains one aspect that is not very well understood and quite challenging to account for in the design of rockfall protection structures, namely the fragmentation of falling blocks upon impact. Rocks often break up upon impact, which leads to a change in size, shape and energy of falling blocks, parameters that affect the design of the protective structures. Before being able to incorporate fragmentation into predictive trajectory models, it is required to better understand the fragmentation process and its likely outcome (number, volume of fragments and their trajectories). To that aim, an innovative experimental setup was developed at the University of Newcastle (Australia) to study rock fragmentation upon impact. The setup was designed to perform controlled vertical drop tests and record the following impact parameters: impact force, impulse, impact duration, velocities (of the block before impact and its fragment after impact) and all components of energy, pre and post impact. Six views (four high-speed cameras and two mirrors) are used for an accurate reconstruction of the 3D trajectory of blocks and fragments, in translation and rotation. This paper presents the validation of the setup via two series of drop tests using mortar spheres. Attention was focused on the evaluation of impact force and impulse from load cells placed under the impacted surface, tracking of translational and rotational velocity and the computation of total kinetic energy (before and after impact) and all components of energy dissipation. The results confirm that the experimental setup and the approach developed can be used to obtain impact force, impulse and to compute the energy balance during the impact and fragmentation and conduct advanced fragmentation testing.
Similar content being viewed by others
Availability of data and material
N/A.
Code availability
N/A.
Abbreviations
- AC:
-
Accelerometer
- \({A}_{j}\) :
-
Area of new surfaces generated by fragmentation
- \(c\) :
-
Dimensional viscosity damping coefficient
- \({Co{R}}_{\text{theo}}\) :
-
Theoretical coefficient of restitution for elastic-perfectly plastic sphere impacting a plane surface
- \({Co{R}}_{\text{exp}}\) :
-
Experimental coefficient of restitution
- \(Co{R}_{w}\) :
-
Coefficient of restitution for elastic wave propagation
- \( {E}_{{k}_{\text{tot}}}^{b}, {E}_{{k}_{\text{tot}}}^{a}\) :
-
Total kinetic energy before and after impact
- \({E}_{{k}_{t}}^{b}, {E}_{{k}_{t}}^{a}\) :
-
Translational component of kinetic energy before and after impact
- \({E}_{{k}_{r}}^{b}, {E}_{{k}_{r}}^{a}\) :
-
Rotational component of kinetic energy before and after impact
- \(f\) :
-
Impact force frequency
- \({f}_{d}\) :
-
Damped natural frequency
- \({f}_{n}\) :
-
Undamped natural frequency
- \(F\) :
-
External force applied to the system
- \({F}_{1}, {F}_{2}, {F}_{3}\) :
-
Forces recorded from the three load cells under the slab
- \({F}_{\text{max}}\) :
-
Force of maximum compression
- \({F}_{T}\) :
-
Transmitted force—sum of the three forces recorded from the load cells
- \({F}_{\text{imp}}\) :
-
Estimated impact force
- \({F}_{\text{imp,LC}}\) :
-
Impact force recorded from the top load cell
- \({h}_{s}\) :
-
Thickness of the slab
- \({I}_{I}, {I}_{II}, {I}_{III}\) :
-
Moments of inertia for the principal axes
- \(J\) :
-
Estimated impulse
- \({J}_{LC}\) :
-
Impulse computed using top load cell data
- \(k\) :
-
Stiffness of the system composed by the slab and three bottom load cells
- \({K}_{Ic}\) :
-
Fracture toughness
- LC1, LC2, LC3:
-
Load cells
- \(m\) :
-
Mass of the sphere
- m i :
-
Mass of fragment i
- \({m}_{\mathrm{s}}\) :
-
Mass of the slab
- \({R}_{1}, {R}_{2}\) :
-
Radius of the sphere and the slab
- \(\tilde{R }\) :
-
Equivalent radius
- S1, S2:
-
Series of drop tests
- \(t\) :
-
Time
- \({v}_{i}\) :
-
Absolute translational velocity of fragment i
- \({v}_{\text{imp}}\) :
-
Impact velocity
- \({v}_{p}\) :
-
Propagation velocity of quasi-longitudinal waves in the slab
- \({v}_{y}\) :
-
Yield velocity
- V1, V2, V3, V4:
-
Physical viewpoints
- V5, V6:
-
Virtual viewpoints
- \({Y}_{1}, {Y}_{2}\) :
-
Young’s modulus of the sphere and the system
- \(\tilde{Y }\) :
-
Equivalent Young’s modulus
- \(z, \dot{z},\ddot{z}\) :
-
Displacement, velocity and acceleration of the slab
- \({z}_{\text{max}}\) :
-
Max displacement of the slab
- \(\alpha\) :
-
Main angle of rotation
- \(\beta\) :
-
Non-dimensional viscous damping coefficient
- \(\gamma\) :
-
Surface energy per unit area
- \(\Delta {E}_{d}\) :
-
Energy loss in deformation
- \(\Delta {E}_{fr}\) :
-
Energy loss to create the fracture surfaces
- \( \Delta {E}_{\text{slab}}\) :
-
Energy loss associated to the elastic displacement of the slab
- \(\Delta {E}_{\text{tot}}\) :
-
Total energy loss associated with the impact
- \(\Delta {E}_{w}\) :
-
Energy loss in elastic wave propagation
- \(\Delta {t}_{\text{imp}}\) :
-
Measurement of the direct impact duration by the pressure sensor
- \(\Delta {t}_{\text{imp,LC}}\) :
-
Measurement of the direct impact duration by the load cell top
- \(\Delta {t}_{T}\) :
-
Transmitted impact duration recorded from the load cells under the slab
- \({\vartheta }_{y}\) :
-
Ratio of mean indentation pressure (assumed fully plastic) to uniaxial yield stress
- \(\lambda\) :
-
Inelasticity parameter
- \({\nu }_{1},{\nu }_{2}\) :
-
Poisson’s ration of the sphere and the slab
- \({\rho }_{1},{\rho }_{2}\) :
-
Density of the sphere and the slab
- \({\sigma }_{c}\) :
-
Unconfined compressive strength
- \({\sigma }_{t}\) :
-
Tensile strength
- \({\sigma }_{y}\) :
-
Yield stress of the impacting material (sphere)
- \({\omega }_{{I}_{i}},{\omega }_{I{I}_{i}},{\omega }_{II{I}_{i}}\) :
-
Rotational velocities around the 3 principal axes of fragment i
References
Agliardi F, Crosta GB (2003) High resolution three-dimensional numerical modelling of rockfalls. Int J Rock Mech Min Sci 40:455–471. https://doi.org/10.1016/S1365-1609(03)00021-2
Anliot M (2005) Volume estimation of airbags: a visual hull approach. Master’s thesis, Linköping University, Sweden
Asteriou P, Tsiambaos G (2018) Effect of impact velocity, block mass and hardness on the coefficients of restitution for rockfall analysis. Int J Rock Mech Min Sci 106:41–50. https://doi.org/10.1016/j.ijrmms.2018.04.001
Asteriou P, Saroglou H, Tsiambaos G (2013) Rockfall: scaling factors for the coefficient of restitution. In: ISRM international symposium-EUROCK 2013. International Society for Rock Mechanics and Rock Engineering
Azzoni A, De Freitas MH (1995) Experimentally gained parameters, decisive for rock fall analysis. Rock Mech Rock Eng 28:111–124. https://doi.org/10.1007/bf01020064
Bozzolo D, Pamini R (1986) Simulation of rock falls down a valley side. Acta Mech 63:113–130. https://doi.org/10.1007/bf01182543
Carmona HA, Wittel FK, Kun F, Herrmann HJ (2008) Fragmentation processes in impact of spheres. Phys Rev E 77:051302. https://doi.org/10.1103/PhysRevE.77.051302
Chau KT, Wong RHC, Wu JJ (2002) Coefficient of restitution and rotational motions of rockfall impacts. Int J Rock Mech Min Sci 39:69–77. https://doi.org/10.1016/S1365-1609(02)00016-3
Dewez T et al (2010) OFAI: 3D block tracking in a real-size rockfall experiment on a weathered volcanic rocks slope of Tahiti, French Polynesia. Rock Slope Stability
Dorren LKA (2003) A review of rockfall mechanics and modelling approaches. Prog Phys Geogr 27:69–87. https://doi.org/10.1191/0309133303pp359ra
Dorren LKA, Berger F, le Hir C, Mermin E, Tardif P (2005) Mechanisms, effects and management implications of rockfall in forests. For Ecol Manag 215:183–195. https://doi.org/10.1016/j.foreco.2005.05.012
Evans SG, Hungr O (1993) The assessment of rockfall hazard at the base of talus slopes. Can Geotech J 30:620–636. https://doi.org/10.1139/t93-054
Giacomini A, Buzzi O, Renard B, Giani GP (2009) Experimental studies on fragmentation of rock falls on impact with rock surfaces. Int J Rock Mech Min Sci 46:708–715. https://doi.org/10.1016/j.ijrmms.2008.09.007
Giacomini A, Thoeni K, Lambert C, Booth S, Sloan SW (2012) Experimental study on rockfall drapery systems for open pit highwalls. Int J Rock Mech Min Sci 56:171–181. https://doi.org/10.1016/j.ijrmms.2012.07.030
Giani GP, Giacomini A, Migliazza M, Segalini A (2004) Experimental and theoretical studies to improve rock fall analysis and protection work design. Rock Mech Rock Eng 37:369–389. https://doi.org/10.1007/s00603-004-0027-2
Guccione DE, Thoeni K, Fityus S, Buzzi O, Giacomini A (2019) Development of an apparatus to track rock fragment trajectory in 3D. Paper presented at the rock mechanics for natural resources and infrastructure development-full. In: Proceedings of the 14th international congress on rock mechanics and rock engineering (ISRM 2019), Foz do Iguassu, Brazil, September 13–18, 2019, pp 1622–1629
Guccione DE, Thoeni K, Giacomini A, Buzzi O, Fityus S (2020) Efficient multi-view 3D tracking of arbitrary rock fragments upon impact. Int Arch Photogramm Remote Sens Spatial Inf Sci XLIII-B2-2020:589–596. https://doi.org/10.5194/isprs-archives-XLIII-B2-2020-589-2020
Hou T-x, Xu Q, Xie H-q, Xu N-w, Zhou J-w (2017) An estimation model for the fragmentation properties of brittle rock block due to the impacts against an obstruction. J Mt Sci 14:1161–1173. https://doi.org/10.1007/s11629-017-4398-8
Hungr O, Evans SG (1988) Engineering evaluation of fragmental rockfall hazards Landslides Proc 5th symposium. Lausanne 1:685–690
Image Systems Motion Analysis (2019) TEMA3D. http://www.imagesystems.se/tema/. Accessed 28 Feb 2020
Imre B, Räbsamen S, Springman SM (2008) A coefficient of restitution of rock materials. Comput Geosci 34:339–350. https://doi.org/10.1016/j.cageo.2007.04.004
Khanal M, Schubert W, Tomas J (2008) Compression and impact loading experiments of high strength spherical composites. Int J Miner Process 86:104–113. https://doi.org/10.1016/j.minpro.2007.12.001
Kuruppu MD, Obara Y, Ayatollahi MR, Chong KP, Funatsu T (2014) ISRM-suggested method for determining the mode I static fracture toughness using semi-circular bend specimen. Rock Mech Rock Eng 47:267–274. https://doi.org/10.1007/s00603-013-0422-7
Labous L, Rosato AD, Dave RN (1997) Measurements of collisional properties of spheres using high-speed video analysis. Phys Rev E 56:5717
Liu L, Kafui KD, Thornton C (2010) Impact breakage of spherical, cuboidal and cylindrical agglomerates. Powder Technol 199:189–196. https://doi.org/10.1016/j.powtec.2010.01.007
Matas G, Lantada N, Corominas J, Gili JA, Ruiz-Carulla R, Prades A (2017) RockGIS: a GIS-based model for the analysis of fragmentation in rockfalls. Landslides 14:1565–1578. https://doi.org/10.1007/s10346-017-0818-7
Nocilla N, Evangelista A, Scotto di Santolo A (2008) Fragmentation during rock falls: two Italian Case Studies of Hard and Soft Rocks. Rock Mech Rock Eng 42:815. doi:https://doi.org/10.1007/s00603-008-0006-0
Ritchie AM (1963) Evaluation of rockfall and its control. Highway Res Rec 17:13–28
Ruiz-Carulla R, Corominas J (2020) Analysis of rockfalls by means of a fractal fragmentation model. Rock Mech Rock Eng 53:1433–1455. https://doi.org/10.1007/s00603-019-01987-2
Ruiz-Carulla R, Corominas J, Mavrouli O (2015) A methodology to obtain the block size distribution of fragmental rockfall deposits. Landslides 12:815–825. https://doi.org/10.1007/s10346-015-0600-7
Ruiz-Carulla R, Corominas J, Mavrouli O (2017) A fractal fragmentation model for rockfalls. Landslides 14:875–889. https://doi.org/10.1007/s10346-016-0773-8
Salman AD et al (2004) Descriptive classification of the impact failure modes of spherical particles. Powder Technol 143–144:19–30. https://doi.org/10.1016/j.powtec.2004.04.005
Seifried R, Schiehlen W, Eberhard P (2005) Numerical and experimental evaluation of the coefficient of restitution for repeated impacts. Int J Impact Eng 32:508–524. https://doi.org/10.1016/j.ijimpeng.2005.01.001
Shen W-G, Zhao T, Crosta GB, Dai F (2017) Analysis of impact-induced rock fragmentation using a discrete element approach. Int J Rock Mech Min Sci 98:33–38. https://doi.org/10.1016/j.ijrmms.2017.07.014
Spadari M, Giacomini A, Buzzi O, Fityus S, Giani GP (2012) In situ rockfall testing in New South Wales, Australia. Int J Rock Mech Min Sci 49:84–93. https://doi.org/10.1016/j.ijrmms.2011.11.013
Stronge WJ (2000) Impact mechanics. Cambridge University Press, Cambridge. https://doi.org/10.1017/CBO9780511626432
Thorby D (2008) Structural dynamics and vibration in practice. Elsevier
Tomas J, Schreier M, Gröger T, Ehlers S (1999) Impact crushing of concrete for liberation and recycling. Powder Technol 105:39–51. https://doi.org/10.1016/S0032-5910(99)00116-3
Virtanen P et al (2020) SciPy 1.0: fundamental algorithms for scientific computing in python. Nat Methods. https://doi.org/10.1038/s41592-019-0686-2
Volkwein A, Klette J (2014) Semi-automatic determination of rockfall trajectories. Sensors 14:18187–18210
Volkwein A et al (2011) Rockfall characterisation and structural protection - a review. Nat HazArd Earth Syst Sci 11:2617–2651. https://doi.org/10.5194/nhess-11-2617-2011
Wang QJ, Zhu D (2013) Contact yield. In: Wang QJ, Chung Y-W (eds) Encyclopedia of Tribology. Springer US, Boston, MA, pp 559–566. https://doi.org/10.1007/978-0-387-92897-5_503
Wang Y, Tonon F (2011) Discrete element modeling of rock fragmentation upon impact in rock fall analysis. Rock Mech Rock Eng 44:23–35. https://doi.org/10.1007/s00603-010-0110-9
Wu SZ, Chau KT, Yu TX (2004) Crushing and fragmentation of brittle spheres under double impact test. Powder Technol 143–144:41–55. https://doi.org/10.1016/j.powtec.2004.04.028
Ye Y, Thoeni K, Zeng Y, Buzzi O, Giacomini A (2019a) Numerical investigation of the fragmentation process in marble spheres upon dynamic impact. Rock Mech Rock Eng. https://doi.org/10.1007/s00603-019-01972-9
Ye Y, Zeng Y, Thoeni K, Giacomini A (2019b) An experimental and theoretical study of the normal coefficient of restitution for marble spheres. Rock Mech Rock Eng 52:1705–1722. https://doi.org/10.1007/s00603-018-1709-5
Zener C (1941) The intrinsic inelasticity of large plates. Phys Rev 59:669–673
Zhang QB, Zhao J (2014) Quasi-static and dynamic fracture behaviour of rock materials: phenomena and mechanisms. Int J Fract 189:1–32. https://doi.org/10.1007/s10704-014-9959-z
Acknowledgements
The authors would like to acknowledge the financial support of ARC DP160103140, the support of the technical staff at the Civil Engineering laboratory at the University of Newcastle and the help received from Michele Spadari, Toma Canessi, Nathan Fourcade and Giuseppina Ciccone in developing the setup.
Author information
Authors and Affiliations
Contributions
All authors provided a significant contribution to the research and to the preparation of the manuscript.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Guccione, D.E., Thoeni, K., Fityus, S. et al. An Experimental Setup to Study the Fragmentation of Rocks Upon Impact. Rock Mech Rock Eng 54, 4201–4223 (2021). https://doi.org/10.1007/s00603-021-02501-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-021-02501-3