Rock Cutting Tests with a Simple-Shaped Chisel Pick to Provide Some Useful Data

This is a preview of subscription content, log in to check access.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

References

  1. Aksoy CO (2014) Proposed chart for the selection of impact hammer. Int J Rock Mech Min Sci 6:120–127

    Google Scholar 

  2. Aksoy CO, Ozacar V, Demirel N, Özer SC, Safak S (2011) Determination of instantaneous breaking rate by geological strength index, block punch index and power of impact hammer for various rock mass conditions. Tunn Undergr Space Technol 26:534–540

    Article  Google Scholar 

  3. Anderson JM, Rostami J (1998) Criteria for selection and application of rock cutting tools for soft rock mining. In: SME/AIME annual meeting and exhibition, pp 1–13

  4. Barker JS (1964) A laboratory investigation of rock cutting using large picks. Int J Rock Mech Min Sci Geomech Abstr 1:519–534

    Article  Google Scholar 

  5. Bartholomae RC, Becker RS (1983) Coal cutting mechanics and noise generation. Bureau of Mines Report, Report No: 8743

  6. Bilgin N (1977) Investigation into mechanical cutting characteristics of some medium and high strength rocks, Ph.D. Thesis, Newcastle Upon Tyne University, England

  7. Bilgin N, Yazici S, Eskikaya S (1996) A model to predict the performance of roadheaders and impact hammers in tunnel drivages. In: International Eurock’96 symposium, Torino, pp 715–750

  8. Bilgin N, Demircin MA, Copur H, Balci C, Tuncdemir H, Akcin N (2006) Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results. Int J Rock Mech Min Sci 43(1):139–156

    Article  Google Scholar 

  9. Bilgin N, Copur H, Balci C (2012) Effect of replacing disc cutters with chisel tools on performance of a TBM in difficult ground conditions. Tunn Undergr Space Technol 27(1):41–51

    Article  Google Scholar 

  10. Bilgin N, Copur H, Balci C (2014) Mechanical excavation in mining and civil industries. CRC Press, Boca Raton, p 366

    Google Scholar 

  11. Cook NGW (1970) Analysis of hard-rock cuttability for machines. Soc Min Eng Trans, pp 39–54

  12. Copur H (2010) Linear stone cutting tests with chisel tools for identification of cutting principles and predicting performance of chain saw machines. Int J Rock Mech Min Sci 47(1):104–120

    Article  Google Scholar 

  13. Copur H, Aydin H, Bilgin N, Balci C, Tumac D, Dayanc C (2014) Predicting performance of EPB TBMs by using a stochastic model implemented into a deterministic model. Tunn Undergr Space Technol 42:1–14

    Article  Google Scholar 

  14. Dalziel JA, Davies E (1964) Initiation of cracks in coal specimens by blunted wedges. Engineer 31(January):217–220

    Google Scholar 

  15. Evans I (1958) Theoretical aspects of coal ploughing. In: Walton WH (ed) Mechanical properties of non-metallic brittle materials. Butterworths, London, pp 451–468

    Google Scholar 

  16. Evans I (1962) A theory of the basic mechanics of coal ploughing. In: International symposium on mining research, vol 2. University of Missouri, Pergamon Press, pp 761–768

  17. Evans I (1965) The force required to cut coal with blunt wedges. Int J Rock Mech Min Sci Geo Abstr 2:1–12

    Article  Google Scholar 

  18. Evans I (1972) Line spacing of picks for efficient cutting. Int J Rock Mech Min Sci Geomech Abstr 9:355–359

    Article  Google Scholar 

  19. Evans I, Pomeroy CD (1966) The strength, fracture and workability of coal. Pergamon Press, NY, p 277

    Google Scholar 

  20. Evenden MP, Edwards JS (1985) Cutting theory and coal seam assessment techniques and their application to shearer design. Min Sci Technol 2:253–270

    Article  Google Scholar 

  21. Fowell RJ, Ochei NN (1984) A comparison of dust make and energy requirements for rock cutting tools. Int J Min Eng 2:73–83

    Article  Google Scholar 

  22. Goktan RM (1990) Effect of cutter pick rake angle on the failure pattern of high-strength rocks. Min Sci Technol 11:281–285

    Article  Google Scholar 

  23. He X, Xu C, Peng K, Huang G (2017) On the critical failure mode transition depth for rock cutting with different back rake angles. Tunn Undergr Space Technol 63:95–105

    Article  Google Scholar 

  24. Huang H, Lecampion B, Detournay E (2013) Discrete element modeling of tool–rock interaction i: rock cutting. Int J Numer Anal Methods Geomech 37:1913–1929

    Article  Google Scholar 

  25. Hurt KG, MacAndrew KM (1985) Cutting efficiency and life of rock cutting picks. Min Sci Technol 2:139–151

    Article  Google Scholar 

  26. Inyang HI (2002) Developments in drag bit cutting of rocks for energy infrastructure. Int J Surf Min Reclam Environ 16(June):248–260

    Article  Google Scholar 

  27. ISRM (1981) Rock characterization, testing and monitoring. In: Brown ET (ed) ISRM suggested methods. Pergamon Press, NY, p 211

    Google Scholar 

  28. Nishimatsu Y (1972) The mechanics of rock cutting. Int J Rock Mech Min Sci 9:261–270

    Article  Google Scholar 

  29. Pariseau G, Fairhurst C (1967) Force-penetration characteristic penetration into rock for wedge penetration into rock. Int J Rock Mech Min Sci Geomech Abstr 4:165–180

    Article  Google Scholar 

  30. Patton FD (1966) Multiple modes of shear failure in rock. International Society for Rock Mechanics, Lisbon, pp 509–513

    Google Scholar 

  31. Philips HR (1975) Rock Cutting mechanics related to the design of primary excavation systems, Ph.D. Thesis, University of Newcastle Upon Tyne, England, p 202

  32. Pomeroy CD, Brown JH (1968) Laboratory investigation of cutting process applied to coal winning machines. J Strain Anal 3(3):232–243

    Article  Google Scholar 

  33. Potts ELJ, Shuttleworth P (1959) A study of ploughability of coal with special reference to the effects of blade shape, direction of planning to the cleat, planning speed and influence of water infusion. Trans Inst Min Eng 117:519–553

    Google Scholar 

  34. Roxborough FF (1973) The cutting rock with picks. Min Eng 132(153):445–454

    Google Scholar 

  35. Roxborough FF (1976) Rock excavation by machine-a comparative study of picks and discs. In: Second Australian Tunnelling Conference, Australia, pp 133–143

  36. Roxborough FF, Rispin A (1973) The mechanical cutting characteristics of the lower chalk. Tunn Tunn 5(1):45–67

    Google Scholar 

  37. Roxborough FF, Sen GC (1986) Breaking coal and rock. In: Martin CH (ed) Australian Coal Mining Practice. Australia Institute of Mining and Metallurgy, pp 130–147

  38. Roxborough FF, King P, Pedroncelli EJ (1981) Tests on the cutting performance of a continuous miner. J South Afr Inst Min Metall 81:9–25

    Google Scholar 

  39. Sundae LS, Myren TA (1987) In situ comparison of radial and point attack bits. USBM RI 9127:15

    Google Scholar 

  40. Tannant DD, Wang C (2010) PFC model of wedge penetration into oil sands. Discrete Elem Methods 259(55):311–316

    Google Scholar 

  41. Verhoef PNW (1997) Wear of rock cutting tools. Balkema, Amsterdam, p 327

    Google Scholar 

  42. Whittaker BN, Szwilski AB (1973) Rock cutting by impact action. Int J Rock Mech Min Sci 10:653–671

    Article  Google Scholar 

  43. Yasar S (2017) Development of vertical rock cutting rig for rock cuttability assessment, Ph.D. Thesis, Karadeniz Technical University, Trabzon, Turkey

  44. Yasar S, Yilmaz AO (2017) A novel mobile testing equipment for rock cuttability assessment: vertical rock cutting rig (VRCR). Rock Mech Rock Eng 50(4):857–869

    Article  Google Scholar 

  45. Yilmaz NG, Yurdakul M, Goktan RM (2007) Prediction of radial bit cutting force in high-strength rocks using multiple linear regression analysis. Int J Rock Mech Min Sci 44:962–970

    Article  Google Scholar 

Download references

Author information

Affiliations

Authors

Corresponding author

Correspondence to Serdar Yasar.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Yasar, S., Yilmaz, A.O. Rock Cutting Tests with a Simple-Shaped Chisel Pick to Provide Some Useful Data. Rock Mech Rock Eng 50, 3261–3269 (2017). https://doi.org/10.1007/s00603-017-1303-2

Download citation

Keywords

  • Rock cutting mechanics
  • Chisel picks
  • Cutter head design
  • Excavation machines
  • Cutting force