Skip to main content
Log in

Numerical Simulation of Crack Growth and Coalescence in Rock-Like Materials Containing Multiple Pre-existing Flaws

  • Original Paper
  • Published:
Rock Mechanics and Rock Engineering Aims and scope Submit manuscript

Abstract

A novel meshless numerical method, called general particle dynamics (GPD), is proposed to simulate samples of rock-like brittle heterogeneous material containing four preexisting flaws under uniaxial compressive loads. Numerical simulations are conducted to investigate the initiation, growth, and coalescence of cracks using a GPD code. An elasto-brittle damage model based on an extension of the Hoek–Brown strength criterion is applied to reflect crack initiation, growth, and coalescence and the macrofailure of the rock-like material. The preexisting flaws are simulated by empty particles. The particle is killed when its stresses satisfy the Hoek–Brown strength criterion, and the growth path of cracks is captured through the sequence of such damaged particles. A statistical approach is applied to model the heterogeneity of the rock-like material. It is found from the numerical results that samples containing four preexisting flaws may produce five types of cracks at or near the tips of preexisting flaws including wing, coplanar or quasi-coplanar secondary, oblique secondary, out-of-plane tensile, and out-of-plane shear cracks. Four coalescence modes are observed from the numerical results: tensile (T), compression (C), shear (S), and mixed tension/shear (TS). A higher load is required to induce crack coalescence in the shear mode (S) than the tensile (T) or mixed (TS) mode. It is concluded from the numerical results that crack coalescence occurs following the weakest coalescence path among all possible paths between any two flaws. The numerical results are in good agreement with reported experimental observations.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  • Atluri NS, Zhu TA (1998) New meshless local Petrov–Galerkin (MLPG) approach in computational mechanics. Comput Mech 22:117–127

    Article  Google Scholar 

  • Belytschko T, Lu YY (1994) Element free Galerkin methods. Int J Numer Methods Eng 37:229–256

    Article  Google Scholar 

  • Benz W, Asphaug E (1995) Simulations of brittle solids using smoothed particle hydrodynamics. Comput Phys Commun 87:253–265

    Article  Google Scholar 

  • Bieniawski ZT (1967) Mechanism of brittle fracture of rock, Part I F theory of the fracture process. J Rock Mech Min Sci 4:395–406

    Article  Google Scholar 

  • Bobet A (2000) The initiation of secondary cracks in compression. Eng Fract Mech 66:187–219

    Article  Google Scholar 

  • Bobet A, Einstein HH (1998) Fracture coalescence in rock-type materials under uniaxial and biaxial compression. Int J Rock Mech Min Sci 35(7):863–888

    Article  Google Scholar 

  • Chen JK, Beraun JE, Carney TC (1999) A corrective smoothed particle method for boundary value problems in heat conduction. Int J Numer Methods Eng 46:231–252

    Article  Google Scholar 

  • Colagrossi A, Landrini M (2003) Numerical simulation of interfacial flows by smoothed particle hydrodynamics. J Comput Phys 191(2):448–475

    Article  Google Scholar 

  • Cundall PA, Strack ODL (1979) A discrete numerical model for granular assemblies. Geotechnique 29:47–65

    Article  Google Scholar 

  • Dey TN, Wang CY (1981) Some mechanisms of microcrack growth and interaction in compressive rock failure. Int J Rock Mech Min Sci 18:199–209

    Article  Google Scholar 

  • Gu J, Zhao ZY (2009) Considerations of the discontinuous deformation analysis on wave propagation. Int J Numer Anal Methods Geomech 33(12):1449–1465

    Article  Google Scholar 

  • Hallquist J O (1998) LS-DYNA theoretical manual. Livermore Software Technology Corporation, 2876 Waverley Way, Livermore, CA pp 94550–1740

  • Hoek E (1983) Strength of jointed rock masses. Geotechnique 33:187–223

    Article  Google Scholar 

  • Hoek E (1990) Estimating Mohr–Coulomb friction and cohesion values from the Hoek–Brown failure criterion. Int J Rock Mech Min Sci 27:227–229

    Article  Google Scholar 

  • Hoek E, Brown ET (1980) Empirical strength criterion for rock masses. ASCE J Geotech Geoenviron Eng 106(GT9):1013–1036

    Google Scholar 

  • Hoek E, Brown ET (1997) Practical estimates of rock mass strength. Int J Rock Mech Min Sci 34:1165–1186

    Article  Google Scholar 

  • Lee HW, Jeon SW (2011) An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression. Int J Solids Struct 48:979–999

    Article  Google Scholar 

  • Li SC, Li SC, Cheng YM (2005) Enriched meshless manifold method for two-dimensional crack modeling. Theor Appl Fract Mech 44(3):234–248

    Article  Google Scholar 

  • Libersky LD, Petschek AG, Carney TC, Hipp JR, Allahdadi FA (1993) High strain Lagrangian hydrodynamics: a three-dimensional SPH code for dynamic material response. J Comput Phys 109:67–75

    Article  Google Scholar 

  • Lucy LB (1977) A numerical approach to the testing of the fission hypothesis. Astron J 28(12):1013–1024

    Article  Google Scholar 

  • Ma GW, An XM, Zhang HH, Li LX (2009) Modeling complex crack problems with numerical manifold method. Int J Fract 156(1):21–35

    Article  Google Scholar 

  • Monaghan JJ (1988) An introduction to SPH. Comput Phys Commun 48(1):89–96

    Article  Google Scholar 

  • Monaghan JJ, Gingold RA (1983) Shock simulation by the particle method SPH. J Comput Phys 52:374–389

    Article  Google Scholar 

  • Monaghan JJ, Lattanzio JC (1985) A refined particle method for astrophysical problems. Astron Astrophys 149(1):135–143

    Google Scholar 

  • Neumann JV, Richtmyer RD (1950) A method for the numerical calculation of hydrodynamic shocks. J Appl Phys 21:232–237

    Article  Google Scholar 

  • Ning YJ, Yang J, An XM, Ma GW (2010) Modelling rock fracturing and blast induced rock mass failure via advanced discretisation within the discontinuous deformation analysis framework. Comput Geotech 38(1):40–49

    Article  Google Scholar 

  • Ning YJ, An XM, Ma GW (2011) Footwall slope stability analysis with the numerical manifold method. Int J Rock Mech Min Sci 48:964–975

    Article  Google Scholar 

  • Olson JE, Pollard DD (1991) The initiation and growth of en-echelon veins. J Struct Geol 13(5):595–608

    Article  Google Scholar 

  • Park CH, Bobet A (2009) Crack coalescence in specimens with open and closed flaws: a comparison. Int J Rock Mech Min Sci 46(5):819–829

    Article  Google Scholar 

  • Peng S, Johson AM (1972) Crack growth and faulting in cylindrical specimens of Chelmsford granite. Int J Rock Mech Min Sci 9:37–86

    Article  Google Scholar 

  • Rabczuk T, Zi G (2007) A meshfree method based on the local partition of unity for cohesive cracks. Comput Mech 39(6):743–760

    Article  Google Scholar 

  • Reyes O (1991) Experimental study, analytic modeling of compressive fracture in brittle materials. Ph.D. thesis, Mass., Institute of Technology, Cambridge

  • Reyes O, Einstein HH (1991) Fracture mechanism of fractured rock fracture coalescence model. Proceeding of the Seventh International Conference on Rock Mechanics, 1:333–340

  • Sagong M, Bobet A (2002) Coalescence of multiple flaws in a rock-model material in uniaxial compression. Int J Rock Mech Min Sci 39:229–241

    Article  Google Scholar 

  • Scavia C (1999) The displacement discontinuity method for the analysis of rock structures: a fracture mechanic. In: Aliabadi MH (ed) Fracture of rock. WIT/Computational Mechanics, Boston, pp 39–82

    Google Scholar 

  • Scavia C, Castelli M (1996) In: Barla G (ed) Analysis of the propagation of natural discontinuities in rock bridges, EUROCK’96. Balkema, Rotterdam, pp 445–451

  • Shaw A, Reid SR (2009) Heuristic acceleration correction algorithm for use in SPH computations in impact mechanics. Comput Methods Appl Mech Eng 198(49e52):3962–3974

    Article  Google Scholar 

  • Shaw A, Roy D, Reid SR (2011) Optimised form of acceleration correction algorithm within SPH-based simulations of impact mechanics. Int J Solids Struct 48(25e26):3484–3498

    Article  Google Scholar 

  • Shen B, Stephansson O, Einstein HH, Ghahreman B (1995) Coalescence of fractures under shear stress experiments. J Geophys Res 100(6):5975–5990

    Article  Google Scholar 

  • Shi GH (1991) Manifold method of material analysis. Transactions of the 9th Army Conference on Applied Mathematics and Computing. Minneapolis, USA, 57–76

  • Shi GH, Goodman RE (1989) Generalization of two-dimensional discontinuous deformation analysis for forward modeling. Int J Numer Anal Methods Geomech 13:359–380

    Article  Google Scholar 

  • Tang CA, Lin P, Wong RHC, Chau KT (2001) Analysis of crack coalescence in rock-like materials containing three flaws-part II: numerical approach. Int J Rock Mech Min Sci 38:925–939

    Article  Google Scholar 

  • Tsay RJ, Chiou YJ, Chuang WL (1999) Crack growth prediction by manifold method. J Eng Mech 125:884–890

    Article  Google Scholar 

  • Vasarhelyi B, Bobet A (2000) Modeling of crack initiation, propagation and coalescence in uniaxial compression. Rock Mech Rock Eng 33(2):119–139

    Article  Google Scholar 

  • Vesga LF, Vallejo LE, Lobo-Guerrero S (2008) DEM analysis of the crack propagation in brittle clays under uniaxial compression tests. Int J Numer Anal Methods Geomech 32:1405–1415

    Article  Google Scholar 

  • Weibull W(1939) A statistical theory of the strength of materials. Ing Vet Ak Handl 151:5–44

  • Wong RHC, Chau KT (1998) Crack coalescence in a rock-like material containing two cracks. Int J Rock Mech Min Sci 35(2):147–164

    Article  Google Scholar 

  • Wong LNY, Einstein HH (2009a) Crack coalescence in molded gypsum and Carrara marble: part 1. Macroscopic observations and interpretation. Rock Mech Rock Eng 42(3):475–511

    Article  Google Scholar 

  • Wong LNY, Einstein HH (2009b) Systematic evaluation of cracking behavior in specimens containing single flaws under uniaxial compression. Int J Rock Mech Min Sci 46(2):239–249

    Article  Google Scholar 

  • Wong LNY, Wu ZJ (2014) Application of the numerical manifold method to model progressive failure in rock slopes. Eng Fract Mech 119:1–20

    Article  Google Scholar 

  • Wong RHC, Chau KT, Lin P, Tang CA (2001) Analysis of crack coalescence in rock-like materials containing three flaws F Part I: experimental approach. Int J Rock Mech Min Sci 38:909–924

    Article  Google Scholar 

  • Wu ZJ, Wong LNY (2012) Frictional crack initiation and propagation analysis using the numerical manifold method. Comput Geotech 39:38–53

    Article  Google Scholar 

  • Wu ZJ, Wong LNY (2013) Modeling cracking behavior of rock mass containing inclusions using the enriched numerical manifold method. Eng Geol 162:1–13

    Article  Google Scholar 

  • Gingold RA, Monaghan JJ (1977) Smoothed particle hydrodynamics: theory and application to non-spherical stars. Monthly Notices of the Royal Astronomical Society 181:375–389

  • Yang SQ, Yang DS, Jing HW, Li YH, Wang SY (2012) An experimental study of the fracture coalescence behaviour of brittle sandstone specimens containing three fissures. Rock Mech Rock Eng 45(4):563–582

    Article  Google Scholar 

  • Yoon J (2007) Application of experimental design and optimization to PFC model calibration in uniaxial compression simulation. Int J Rock Mech Min Sci 44:871–889

    Article  Google Scholar 

  • Zhang XP, Wong LNY (2012) Cracking processes in rock-like material containing a single flaw under uniaxial compression: a numerical study based on parallel bonded-particle model approach. Rock Mech Rock Eng 45:711–737

    Google Scholar 

  • Zhang HH, Li LX, An XM, Ma GW (2010a) Numerical analysis of 2-D crack propagation problems using the numerical manifold method. Eng Anal Bound Elem 34(1):41–50

    Article  Google Scholar 

  • Zhang GX, Zhao Y, Peng XC (2010b) Simulation of topping failure of rock slope by numerical manifold method. Int J Comput Method 7:167–189

    Article  Google Scholar 

  • Zhou XP, Cheng H, Feng YF (2013) An experimental study of crack coalescence behaviour in rock-like materials containing multiple flaws under uniaxial compression, Rock Mech Rock Eng (in Press)

Download references

Acknowledgments

This work was supported by project 973 (grant no. 2014CB046903), the National Natural Science Foundation of China (nos. 51325903 and 51279218), Natural Science Foundation Project of CQ CSTC (nos. cstc2013kjrc-ljrccj0001 and cstc2013jcyjys0005), and Research Fund of the Doctoral Program of Higher Education of China (no. 20130191110037).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to X. P. Zhou.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhou, X.P., Bi, J. & Qian, Q.H. Numerical Simulation of Crack Growth and Coalescence in Rock-Like Materials Containing Multiple Pre-existing Flaws. Rock Mech Rock Eng 48, 1097–1114 (2015). https://doi.org/10.1007/s00603-014-0627-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00603-014-0627-4

Keywords

Navigation