Skip to main content
SpringerLink
Log in

Verification of a 3-D LiDAR Viewer for Discontinuity Orientations

  • Original Paper
  • Published:
Rock Mechanics and Rock Engineering Aims and scope Submit manuscript

Abstract

Light detection and ranging (LiDAR) scanners are increasingly being used to measure discontinuity orientations on rock cuts to eliminate the bias and hazards of manual measurements which are also time consuming and somewhat subjective. Typically LiDAR data sets (point clouds) are analyzed by sophisticated algorithms that break down when conditions are not ideal, for example when some of the discontinuities are obscured by vegetation, or when significant portions of the rock face are composed of fractured facets, weathering generated surfaces, or anything that should not be identified as a discontinuity for the purposes of slope stability analysis. This paper presents a simple LiDAR point cloud viewer that allows the user to view the point cloud, identify discontinuities, pick three points on the surface (plane) of each discontinuity, and generate discontinuity orientations using the three-point method. Additionally, a test of our 3-D LiDAR viewer for discontinuity orientations on rock cuts in the United States of America and Canada is presented.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16

Similar content being viewed by others

References

  • Bieniawski ZT (1989) Engineering rock mass classification. Wiley, New York

    Google Scholar 

  • Enge HD, Buckley SJ, Rotevatn A, and Howell JA (2007) From outcrop to reservoir simulation model: workflow and procedures. Geosphere 3:469–490

    Google Scholar 

  • Hoek EV, Bray J (1981) Rock slope engineering. Institution of Mining and Metallurgy, London

    Google Scholar 

  • Hudson JA (1989) Rock mechanics principles in engineering practice. Butterworths, London

    Google Scholar 

  • Kemeny J, Donovan J (2005) Rock mass characterization using lidar and automated point cloud processing. Ground Eng 38(11):26–29, Invited publication

    Google Scholar 

  • Kemeny J, Post R (2003) Estimating three-dimensional rock discontinuity orientation from digital images of fracture traces. Comput Geosci 29(1):65–77

    Article  Google Scholar 

  • Kemeny J, Norton B, Turner K (2006) Rock slope stability analysis utilizing ground-based lidar and digital image processing, Felsbau. In: Rock and Soil Engineering, Nr. 3/06, pp 8–15, Invited publication

  • Labourdette R, Jones RR (2007) Characterization of fluvial architectural element using a three-dimensional outcrop data set: Escanilla braided system, South-Central Pyrenees Spain. Geosphere 3:422–434

    Article  Google Scholar 

  • Leica Geosystems homepage 2012. http://www.leica-geosystems.com/en/Leica-ScanStation-2_62189.htm

  • Lim M, Petley DN, Rosser NJ, Allison RJ, Long AJ, Pybus D (2005) Combined digital photogrammetry and time-of-flight laser scanning for monitoring cliff evolution. Photogramm Record 20:109–129

    Article  Google Scholar 

  • Maerz NH (1990) Photo analysis of rock fabric. PhD dissertation, University of Waterloo, Ontario, Canada

  • Maerz NH, Zhou W (1999) Multivariate analysis of bore hole discontinuity data. Rock Mechanics for Industry. In: Proceedings of the 37th US rock mechanics symposium. Vail, Colorado, pp 431–438

  • Maerz NH, Zhou W (2000) Discontinuity data analysis from oriented boreholes. Pacific Rocks. In: Proceedings of the 4th North American rock mechanics symposium. Seattle, Washington, pp 667–674

  • Maerz NH, Youssef AM, Otoo JN, Kassebaum TJ, Duan Y (2012) A simple method of measuring discontinuity orientations from terrestrial lidar images. Accepted for publication in the Journal of Environmental and Engineering Geoscience

  • Mikos M, Vidmar A, Brilly M (2005) Using a laser measurement system for monitoring morphological changes on the Strug rock fall, Slovenia. Natl Hazards Earth Syst Sci 5:143–153

    Google Scholar 

  • Nasrallah J, Monte J, Kemeny J (2004) Rock mass characterization for slope/catch bench design using 3D laser and digital imaging. In: Proceedings of Gulf Rocks 2004 (ARMA 2004, Rock Mechanics Symposium and the 6th NARMS) Houston, Texas

  • Otoo JN, Maerz NH, Xiaoling L, Duan Y (2011) 3-D discontinuity orientations using combined optical imaging and LiDAR techniques. In: Proceedings of the 45th US rock mechanics symposium, Chicago

  • Otoo JN, Maerz, NH, Xiaoling L, Duan Y (2012) Verification of a 3-D LiDAR point cloud viewer for discontinuity orientations. In: Proceedings of the 46th US rock mechanics symposium, San Francisco, California

  • Priest SD (1993) Discontinuity analysis for rock engineering. Chapman and Hall, London

    Book  Google Scholar 

  • Sagy A, Brodsky EE, Axen GJ (2007) Evolution of fault-surface roughness with slip. Geology 35:283–286

    Article  Google Scholar 

  • Scheidegger AE (1978) The enigma of jointing, Rivista Italiana Di Geofisica. Affini, pp 1–4

  • Slob S, Hack R, Knapen B, Turner K., Kemeny, J (2005) A method for automated discontinuity analysis of rock slopes with 3D laser scanning. In: Proceedings of the transportation research board 84th annual meeting, Washington, D.C.

  • Wyllie DC, Mah CW (2004) Rock slope engineering, 4th edn. Taylor and Francis Group, London

    Google Scholar 

  • Zhou W (2001) Multivariate clustering analysis of discontinuity data from scanlines and oriented boreholes. Ph.D dissertation, University of Missouri, Rolla

Download references

Acknowledgments

The authors would like to thank the National Science Foundation for sponsoring this work. This work is supported in part by the NSF CMMI Award #0856420 and #0856206.

Author information

Authors and Affiliations

  1. Missouri University of Science and Technology, 1006 Kingshighway, Rolla, MO, 65409-0660, USA

    James N. Otoo & Norbert H. Maerz

  2. University of Missouri-Columbia, 209 Engineering Bldg W, Columbia, MO, 65211, USA

    Xialing Li & Ye Duan

Authors
  1. James N. Otoo
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Norbert H. Maerz
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Xialing Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Ye Duan
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to James N. Otoo.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Otoo, J.N., Maerz, N.H., Li, X. et al. Verification of a 3-D LiDAR Viewer for Discontinuity Orientations. Rock Mech Rock Eng 46, 543–554 (2013). https://doi.org/10.1007/s00603-012-0366-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00603-012-0366-3

Keywords

Search

Navigation