Summary.
This paper reports on a comparative study of various types of experimental tests for measuring the tensile strength of rocks and rock-like materials. A critical assessment is presented of some widely used laboratory techniques on the basis of experimental data from the literature and from the laboratory investigation performed in this study.
Tests were carried out using a triaxial apparatus recently set up at Milan University of Technology. This was designed to reduce random misalignments between specimen and loading frame, which are typical of conventional triaxial cells with external tie bars. The apparatus was then modified to perform various types of tests for determining the tensile strength of materials. An artificial building stone and a natural calcarenite of the Gravina di Puglia geological formation, sampled at Montescaglioso (Matera-Italy) were tested in this research. The experimental investigation included various types of tests, namely the uni-axial, the Brazilian, the ring, the three and four points bending and the Luong test. Specimens of both materials were also compressed to failure in unconfined conditions and loaded cyclically in unconfined tension and compression, Young’s moduli being measured by means of local instrumentation.
Similar content being viewed by others
References
T. Apuani (1999) ArticleTitleSulla misura della resistenza a trazione in rocce anisotrope. Riv. Ital. Geotecn. 3 37–45
G Barla N Innaurato (1973) ArticleTitleIndirect tensile testing of anisotropic rocks. Rock Mech. 5 215–230 Occurrence Handle10.1007/BF01301795
J. B. Burland M. Symes (1982) ArticleTitleA simple axial displacement gauge for use in the triaxial apparatus. Géotechnique 32 IssueID1 62–65
C. Butenuth M. H. De Freitas D. Al-Samahiji H. D. Park J. W. Cosgrove K. Schetelig (1993) ArticleTitleObservations on the measurement of tensile strength using the Hoop test. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 30 IssueID2 157–162 Occurrence Handle10.1016/0148-9062(93)90708-L
G. Cardani A. Meda (2004) ArticleTitleMarble behaviour under monotonic and cyclic loading in tension. Constru. Build. Mater. 18 419–424 Occurrence Handle10.1016/j.conbuildmat.2004.03.012
Colback P. S. B. (1966): An analysis of brittle fracture initiation and propagation in the Brazilian test. Proc. 1st Congr. Int. Soc. Rock Mech., Lisbon, vol. 1, 385–391.
Cotecchia, V., Grassi, D. (1975): Stato di conservazione dei “Sassi” di Matera (Basilicata) in rapporto alle condizioni geomorfologiche e geomeccaniche del territorio e alle azioni antropiche. Geol. Appl. Idrogeol. 10.
De Freitas, M. H. (2004): Personal communication.
L. Dobereiner M. H. De Freitas (1986) ArticleTitleGeotechnical properties of weak sandstones. Géotechnique 36 IssueID1 79–94
Fairhurst, C. (1961): Laboratory measurement of some physical properties of rock. Proc. 4th Symp. Rock Mech., Univ. Park, Pennsylvania, 105–118
C. Fairhust (1964) ArticleTitleOn the validity of the Brazilian test for brittle materials. Int. J. Rock Mech. Min. Sci. 1 535–546 Occurrence Handle10.1016/0148-9062(64)90060-9
Griffith, A. A. (1924): Proc. 1st Int. Congr. App. Mech., 55–63.
Hardy H. R., Jayaraman N. I. (1970): An investigation of methods for the determination of the tensile strength of rock. Proc. 2nd Congr. Int. Soc. Rock Mech., Belgrade, vol. 3, 85–92.
I. Hawkes M. Mellor (1970) ArticleTitleUniaxial testing in rock mechanics laboratories. Eng. Geol. 4 177–285 Occurrence Handle10.1016/0013-7952(70)90034-7
Hoek, E. (1964): Rock fracture around mining excavations. Proc. 4th Int. Conf. on Strata Control and Rock Mech., New York.
G. Hondros (1959) Aust. J. Appl. Sci. 10 IssueID3 243–268
J. A. Hudson (1969) ArticleTitleTensile strength and the ring test. Int. J. Rock Mech. Min. Sci. 6 91–97 Occurrence Handle10.1016/0148-9062(69)90029-1
J. A. Hudson E. T. Brown F. Rummel (1972) ArticleTitleThe controlled failure of rock discs and rings loaded in diametral compression. Int. J. Rock Mech. Min. Sci. 9 241–248 Occurrence Handle10.1016/0148-9062(72)90025-3
ISRM Commission on Testing Methods (1978): Suggest methods for determining tensile strength of rock materials. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 15, 101–103.
J. C. Jaeger (1967) ArticleTitleFailure of rocks under tensile conditions. Int. J. Rock Mech. Min. Sci. 4 219–227 Occurrence Handle10.1016/0148-9062(67)90046-0
J. C. Jaeger E. R. Hoskins (1966) ArticleTitleRock failure under the confined Brazilian test. J. Geophys. Res. 71 2651–2659
John, S. J., De Freitas, M. H., Cosgrove, J. W., Clarke, B. A., Loe N., Al-Samahiji D., Tang H. (1991): Stress analysis of a unidirectionally loaded hoop specimen. Proc. 7th Congr. Int. Soc. Rock Mech., Aachen, Germany, 513–518.
Lagioia, R. (1994): Comportamento meccanico dei terreni cementati naturali: indagine sperimentale ed interpretazioni teoriche. Tesi di Dottorato, Politecnico di Milano.
R. Lagioia R. Nova (1995) ArticleTitleAn experimental and theoretical study of the behaviour of a calcarenite in triaxial compression. Géotechnique 45 IssueID4 633–648
M. P. Luong (1986) ArticleTitleUn nouvel essai pour la mesure de la résistance à la traction. Rev. Fr. Géotechn. 34 69–74
Luong, M. P. (1988): Direct tensile and direct shear strengths of Fontainebleau sandstone. In: Cundall et al. (eds), Key questions in rock mechanics. Balkema, Rotterdam, 237–246.
Luong, M. P. (1989): Fracture behaviour of concrete and rock under mode II and mode III shear loading. In: Shah et al. (eds), Fracture of concrete and rock, recent developments. Elsevier, New York.
McClintock, F. A., Walsh, J. B. (1962): Friction on Griffith’s cracks in rock under pressure. Proc. 4th U.S. Nat. Congr. Appl. Mech., 1015–1021.
M. Mellor I. Hawkes (1971) ArticleTitleMeasurement of tensile strength by diametral compressions of discs and annuli. Eng. Geol. 5 173–225 Occurrence Handle10.1016/0013-7952(71)90001-9
Obert L., Windes S. L., Duvall W. I. (1946): Standardized tests for determining the physical properties of mine rock. RI-3891, Bureau of Mines, U.S. Dept. of the Interior.
F. Okubo K. Fukui (1996) ArticleTitleComplete stress-strain curves for various rock types in uniaxial tension. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 33 IssueID6 549–556 Occurrence Handle10.1016/0148-9062(96)00024-1
P. N. Sundaram J. M. Corrales (1980) ArticleTitleBrazilian tensile strength of rocks with different elastic properties in tension and compression. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 17 131–133 Occurrence Handle10.1016/0148-9062(80)90265-X
Xu, S., de Freitas M. H., Clarke B. A. (1988) The measurement of tensile strength or rock. Proc. of the ISRM Symp. Rock Mech. and Power Plants, Madrid, Spain, 125–132.
W. Weibull (1939) ArticleTitleA statistical theory of the strength of materials. Proc. Roy. Swed. Inst. Eng. 151 1–45
G. Wijk (1978) ArticleTitleSome new theoretical aspects of indirect measurements of tensile strength of rocks. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 15 149–160 Occurrence Handle10.1016/0148-9062(78)91221-4
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Coviello, A., Lagioia, R. & Nova, R. On the Measurement of the Tensile Strength of Soft Rocks. Rock Mech. Rock Engng. 38, 251–273 (2005). https://doi.org/10.1007/s00603-005-0054-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-005-0054-7