Abstract
After spinal surgery, patients often want to know whether driving a car or using public transportation can be dangerous for their spine. In order to answer this question, a clinically proven vertebral body replacement (VBR) has been modified. Six load sensors and a telemetry unit were integrated into the inductively powered implant. The modified implant allows the measurement of six load components. Telemeterized devices were implanted in five patients; four of them agreed to exposure themselves to whole-body vibration. During the measurements, the patients sat on a driver seat fixed to a hexapod. They were exposed to random single-axis vibrations in X, Y, and Z directions as well as in multi-axis XYZ directions with frequencies between 0.3 and 30 Hz. Three intensity levels (unweighted root mean square values of 0.25, 0.5 and 1.0 m/s2) were applied. Three postures were studied: sitting freely, using a vertical backrest, and a backrest declined by an angle of 25°. The patients held their hands on their thighs. As expected, the maximum force on the VBR increased with increasing intensity and the number of axes. For the highest intensity level and multi-axis vibration, the maximum forces increased by 89% compared to sitting relaxed. Leaning at the backrest as well as lower intensity levels markedly decreased the implant loads. Driving a car or using public transportation systems—when the patient leans towards the backrest—leads to lower implant loads than walking, and can therefore be allowed already shortly after surgery.
Similar content being viewed by others
References
Bovenzi M, Hulshof CT (1999) An updated review of epidemiologic studies on the relationship between exposure to whole-body vibration and low back pain (1986–1997). Int Arch Occup Environ Health 72:351–365
Lings S, Leboeuf-Yde C (2000) Whole-body vibration and low back pain: a systematic, critical review of the epidemiological literature 1992–1999. Int Arch Occup Environ Health 73:290–297
Seidel H (1993) Selected health risks caused by long-term, whole-body vibration. Am J Ind Med 23:589–604
International Standard Organization for Standardization ISO 2631-1 (1997) Mechanical vibration and shock—evaluation of human exposure to whole-body vibration—Part 1: general requirements
International Standard Organization for Standardization ISO 2631-1 (2004) Mechanical vibration and shock—evaluation of human exposure to whole-body vibration—Part 5: methods for evaluation of vibration containing multiple shocks
Seidel H (2005) On the relationship between whole-body vibration exposure and spinal health risk. Ind Health 43:361–377
Seidel H, Bluthner R, Hinz B (2001) Application of finite-element models to predict forces acting on the lumbar spine during whole-body vibration. Clin Biomech (Bristol, Avon) 16:S57–S63
Hinz B, Seidel H, Hofmann J, Menzel G (2008) The significance of using anthropometric parameters and postures of European drivers as a database for finite-element models when calculating spinal forces during whole-body vibration exposure. Int J Ind Erg 38:816–843
Seidel H, Pöpplau BM, Morlock MM, Püschel K, Huber G (2008) The size of lumbar vertebral endplate areas—prediction by anthopometric characteristics and significance for fatigue failure due to whole-body vibration. Int J Ind Erg 38:844–855
Bozhuizen HC, Bongers PM, Hulshof CTJ (1990) Whole-body vibration and back disorders: a meta-analysis. In: Bongers PM, Boshuizen HC (eds) Back disorders and whole-body vibration at work. Free University, Amsterdam
Seidel H, Heide R (1986) Long-term effects of whole-body vibration: a critical survey of the literature. Int Arch Occup Environ Health 58:1–26
Hulshof C, van Zanten BV (1987) Whole-body vibration and low-back pain. A review of epidemiologic studies. Int Arch Occup Environ Health 59:205–220
Seidel H, Hinz B, Hofmann J, Menzel G (2008) Intraspinal forces and health risk caused by whole-body vibration—predictions for European drivers and different field conditions. Int J Ind Erg 38:856–867
Christ E, Fischer S, Kaulbars U, Sayn D (2006) Effects of vibration at workplaces—values of hand-arm- and whole-body vibration loads. HVBG BIA-Report 6:68–69
Rohlmann A, Gabel U, Graichen F, Bender A, Bergmann G (2007) An instrumented implant for vertebral body replacement that measures loads in the anterior spinal column. Med Eng Phys 29:580–585
International Standard Organization for Standardization ISO 13090-1 (1998) Mechanical vibration and shock—guidance on safety aspects of tests and experiments with people—Part 1: exposure to whole-body vibration and shock
Wilke H-J, Neef P, Hinz B, Seidel H, Claes L (2001) Intradiscal pressure together with anthropometric data—a data set for the validation of models. Clin Biomech (Bristol, Avon) 16:S111–S126
Rohlmann A, Arntz U, Graichen F, Bergmann G (2001) Loads on an internal spinal fixation device during sitting. J Biomech 34:989–993
Rohlmann A, Zander T, Bergmann G (2006) Effects of fusion-bone stiffness on the mechanical behavior of the lumbar spine after vertebral body replacement. Clin Biomech (Bristol, Avon) 21:221–227
Zander T, Bergmann G, Rohlmann A (2009) Large sizes of vertebral body replacement do not reduce the contact pressure on adjacent vertebral bodies per se. Med Eng Phys 31:1307–1312
Acknowledgments
This study was supported by the Deutsche Forschungsgemeinschaft, Bonn, Germany (Ro 581/18-1). The authors greatly appreciate the friendly cooperation of their patients. They thank Dr. A. Bender, M. Kunze, J. Dymke, L. Gericke, Dr. M. Schust, J. Thiel for technical assistance and Dr. U. Weber, Dr. Ch. Heyde and R. Kayser for their medical support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Rohlmann, A., Hinz, B., Blüthner, R. et al. Loads on a spinal implant measured in vivo during whole-body vibration. Eur Spine J 19, 1129–1135 (2010). https://doi.org/10.1007/s00586-010-1346-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00586-010-1346-5