Abstract
Reinforcement of polymer matrices with nanosized objects contributes to the improvement of the mechanical properties of matrices, which strongly depend on the distribution of nanoinclusions in the matrix. In this paper, a new multilevel modeling method has been proposed for estimating the Young's modulus of polymers reinforced with graphene nanoplatelets. The developed methodology covered sequential modeling from nano to macro scale. To describe the elastic responses of each system, a molecular dynamics model was used at nano and micro scales and a micromechanical model was applied for meso and macro levels. To eliminate uncertainties of the size, volume fraction and spatial orientation of a nanoplatelet, a stochastic approach was applied. Results of the technique approbation were in good agreement with the experimental data presented in scientific literature. The developed assessment method is valuable both from scientific and practical points of view. Modeling with this technique can predict how the mechanical properties of nanocomposites manifest themselves at different levels, which makes possible the expansion of the scope of its application.
Similar content being viewed by others
Change history
16 March 2023
This article has been retracted. Please see the Retraction Notice for more detail: https://doi.org/10.1007/s00542-023-05434-9
References
Alhijazi M, Zeeshan Q, Qin Z et al (2020) Finite element analysis of natural fibers composites: a review. Nanotechnol Rev 9:853–875. https://doi.org/10.1515/ntrev-2020-0069
Aneja KS, Böhm HM, Khanna AS, Böhm S (2017) Functionalised graphene as a barrier against corrosion. Flat Chem 1:11–19. https://doi.org/10.1016/j.flatc.2016.08.003
Atif R, Shyha I, Inam F (2016) Mechanical, thermal, and electrical properties of graphene-epoxy nanocomposites—a review. Polymers 8:281. https://doi.org/10.3390/polym8080281
Behdinan K, Moradi-Dastjerdi R, Safaei B, Qin Z, Chu F, Hui D (2020) Graphene and CNT impact on heat transfer response of nanocomposite cylinders. Nanotechnol Rev 9:41–52. https://doi.org/10.1515/ntrev-2020-0004
Cataldi P, Bayer IS, Nanni G, Athanassiou A, Bonaccorso F, Pellegrini V, del Rio Castillo AE, Ricciardella F, Artyukhin S, Tronche M-A, Gogotsi Y, Gogotsi Y (2016) Effect of graphene nano-platelet morphology on the elastic modulus of soft and hard biopolymers. Carbon 109:331–339. https://doi.org/10.1016/j.carbon.2016.08.026
Cha J, Kim J, Ryu S, Hong SH (2019) Strengthening effect of melamine functionalized low-dimension carbon at fiber reinforced polymer composites and their interlaminar shear behavior. Compos Part B Eng 173:106976. https://doi.org/10.1016/j.compositesb.2019.106976
Chawla KK (2019) Micromechanics of composites. In: Composite materials. Springer, Cham, pp 341–390. https://doi.org/10.1007/978-3-030-28983-6_10
Chen Q, Chen X, Zhai Z, Zhu X, Yang Z (2016) Micromechanical modeling of viscoplastic behavior of laminated polymer composites with thermal residual stress effect. J Eng Mater Technol 138:MATS-15-1114. https://doi.org/10.1115/1.4033070
Chen G, Li A, Liu H, Huang S, Zhang Z, Liu W, Zha C, Li B, Wang Z (2018a) Mechanical and dynamic properties of resin blend and composite systems: a molecular dynamics study. Compos Struct 190:160–168. https://doi.org/10.1016/j.compstruct.2018.02.001
Chen J, Yan L, Song W, Xu D (2018b) Interfacial characteristics of carbon nanotube-polymer composites: a review. Compos A Appl Sci Manuf 114:149–169. https://doi.org/10.1016/j.compositesa.2018.08.021
Chong HM, Hinder SJ, Taylor AC (2016) Graphene nanoplatelet-modified epoxy: effect of aspect ratio and surface functionality on mechanical properties and toughening mechanisms. J Mater Sci 51:8764–8790. https://doi.org/10.1007/s10853-016-0160-9
Chua J, Tu Q (2018) A molecular dynamics study of crosslinked phthalonitrile polymers: the effect of crosslink density on thermomechanical and dielectric properties. Polymers 10:64. https://doi.org/10.3390/polym10010064
Cui T, Mukherjee S, Sudeep PM, Colas G, Najafi F, Tam J, Ajayan PM, Singh CV, Filleter T (2020) Fatigue of graphene. Nat Mater 19:405–411. https://doi.org/10.1038/s41563-019-0586-y
Dimov D, Amit I, Gorrie O, Barnes MD, Townsend NJ, Neves AI, Withers F, Russo S, Craciun MF (2018) Ultrahigh performance nanoengineered graphene–concrete composites for multifunctional applications. Adv Funct Mater 28:1705183. https://doi.org/10.1002/adfm.201705183
Doagou-Rad S, Islam A, Merca TD (2020) An application-oriented roadmap to select polymeric nanocomposites for advanced applications: a review. Polym Compos 41:1153–1189. https://doi.org/10.1002/pc.25461
Dong L, Chao C, Yan P (2019) Effective modulus of biological staggered nanocomposites with interface stress effect. Compos B Eng 166:701–709. https://doi.org/10.1016/j.compositesb.2019.03.001
Fan F, Xu Y, Sahmani S, Safaei B (2020) Modified couple stress-based geometrically nonlinear oscillations of porous functionally graded microplates using NURBS-based isogeometric approach. Comput Methods Appl Mech Eng 372:113400. https://doi.org/10.1016/j.cma.2020.113400
Fan F, Sahmani S, Safaei B (2021) Isogeometric nonlinear oscillations of nonlocal strain gradient PFGM micro/nano-plates via NURBS-based formulation. Compos Struct 255:112969. https://doi.org/10.1016/j.compstruct.2020.112969
Friedrich K, Zhang Z, Schlarb AK (2005) Effects of various fillers on the sliding wear of polymer composites. Compos Sci Technol 65:2329–2343. https://doi.org/10.1016/j.compscitech.2005.05.028
Gao W, Qin Z, Chu F (2020) Wave propagation in functionally graded porous plates reinforced with graphene platelets. Aerosp Sci Technol 102:105860. https://doi.org/10.1016/j.ast.2020.105860
Garzon-Hernandez S, Garcia-Gonzalez D, Arias A (2018) Multi-impact mechanical behaviour of short fibre reinforced composites. Compos Struct 202:241–252. https://doi.org/10.1016/j.compstruct.2018.01.070
Gonçalves C, Pinto A, Machado AV, Moreira J, Goncalves IC, Magalhaes F (2018) Biocompatible reinforcement of poly (lactic acid) with graphene nanoplatelets. Polym Compos 39:308–320. https://doi.org/10.1002/pc.24050
Hadden CM, Jensen BD, Bandyopadhyay A, Odegard GM, Koo A, Liang R (2013) Molecular modeling of EPON-862/graphite composites: interfacial characteristics for multiple crosslink densities. Compos Sci Technol 76:92–99. https://doi.org/10.1016/j.compscitech.2013.01.002
Hosseini SA, Saber-Samandari S, Maleki Moghadam R (2017) Multiscale modeling of interface debonding effect on mechanical properties of nanocomposites. Polym Compos 38:789–796. https://doi.org/10.1002/pc.23639
ISO 13586 (2000) Plastics—determination of fracture toughness
ISO 527–2 (1996) Plastics—determination of tensile properties—Part 2: test conditions for moulding and extrusion plastics. International Standards Organisation, Geneva
Izzaty N, Sastra HY (2019) The implementation of graphene composites for automotive: an industrial perspective. In IOP conference series: materials science and engineering. IOP Publishing, pp 012133. https://doi.org/https://doi.org/10.1016/10.1088/1757-899X/536/1/012133
Kalamkarov AL, Georgiades AV, Rokkam SK, Veedu VP, Ghasemi-Nejhad MN (2006) Analytical and numerical techniques to predict carbon nanotubes properties. Int J Solids Struct 43:6832–6854. https://doi.org/10.1016/j.ijsolstr.2006.02.009
Kilic U, Sherif MM, Ozbulut OE (2019) Tensile properties of graphene nanoplatelets/epoxy composites fabricated by various dispersion techniques. Polym Test 76:181–191. https://doi.org/10.1016/j.polymertesting.2019.03.028
Kumar A, Sharma K, Dixit AR (2020) A review on the mechanical and thermal properties of graphene and graphene-based polymer nanocomposites: understanding of modelling and MD simulation. Mol Simul 46:136–154. https://doi.org/10.1080/08927022.2019.1680844
Laurenzi S, de Zanet G, Santonicola MG (2020) Numerical investigation of radiation shielding properties of polyethylene-based nanocomposite materials in different space environments. Acta Astronaut 170:530–538. https://doi.org/10.1016/j.actaastro.2020.02.027
Lee C, Wei X, Kysar JW, Hone J (2008) Measurement of the elastic properties and intrinsic strength of monolayer graphene. Science 321:385–388. https://doi.org/10.1126/science.1157996
Li Q, Xie B, Sahmani S, Safaei B (2020) Surface stress effect on the nonlinear free vibrations of functionally graded composite nanoshells in the presence of modal interaction. J Braz Soc Mech Sci Eng 42:1–18. https://doi.org/10.1007/s40430-020-02317-2
Ma J, Meng Q, Zaman I, Zhu S, Michelmore A, Kawashima N, Wang CH, Kuan HC (2014) Development of polymer composites using modified, high-structural integrity graphene platelets. Compos Sci Technol 91:82–90. https://doi.org/10.1016/j.compscitech.2013.11.017
Mader A, Kondor A, Schmid T, Einsiedel R, Müssig J (2016) Surface properties and fibre-matrix adhesion of man-made cellulose epoxy composites—influence on impact properties. Compos Sci Technol 123:163–170. https://doi.org/10.1016/j.compscitech.2015.12.007
Meng Q, Jin J, Wang R, Kuan HC, Ma J, Kawashima N, Michelmore A, Zhu S, Wang CH (2014) Processable 3-nm thick graphene platelets of high electrical conductivity and their epoxy composites. Nanotechnology 25:125707. https://doi.org/10.1088/0957-4484/25/12/125707
Min C, He Z, Liang H, Liu D, Dong C, Song H, Huang Y (2020) High mechanical and tribological performance of polyimide nanocomposite reinforced by fluorinated graphene oxide. Polym Compos 41:1624–1635. https://doi.org/10.1002/pc.25484
Mittal G, Dhand V, Rhee KY, Park SJ, Lee WR (2015) A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites. J Ind Eng Chem 21:11–25. https://doi.org/10.1016/j.jiec.2014.03.022
Mohammadsalehi M, Zargar O, Baghani M (2017) Study of non-uniform viscoelastic nanoplates vibration based on nonlocal first-order shear deformation theory. Meccanica 52:1063–1077. https://doi.org/10.1007/s11012-016-0432-0
Moradi-Dastjerdi R, Behdinan K (2019) Thermoelastic static and vibrational behaviors of nanocomposite thick cylinders reinforced with graphene. Steel Compos Struct 31:529–539. https://doi.org/10.12989/scs.2019.31.5.529
Moradi-Dastjerdi R, Behdinan K (2020a) Temperature effect on free vibration response of a smart multifunctional sandwich plate. J Sandw Struct Mater. https://doi.org/10.1177/1099636220908707
Moradi-Dastjerdi R, Behdinan K (2020b) Thermo-electro-mechanical behavior of an advanced smart lightweight sandwich plate. Aerosp Sci Technol 106:106142. https://doi.org/10.1016/j.ast.2020.106142
Moradi-Dastjerdi R, Behdinan K (2020c) Stability analysis of multifunctional smart sandwich plates with graphene nanocomposite and porous layers. Int J Mech Sci. https://doi.org/10.1016/j.ijmecsci.2019.105283
Moradi-Dastjerdi R, Behdinan K, Safaei B, Qin Z (2020a) Buckling behavior of porous CNT-reinforced plates integrated between active piezoelectric layers. Eng Struct 222:111141. https://doi.org/10.1016/j.engstruct.2020.111141
Moradi-Dastjerdi R, Behdinan K, Safaei B, Qin Z (2020b) Static performance of agglomerated CNT-reinforced porous plates bonded with piezoceramic faces. Int J Mech Sci 188:105966. https://doi.org/10.1016/j.ijmecsci.2020.105966
Paley M, Aboudi J (1992) Micromechanical analysis of composites by the generalized cells model. Mech Mater 14:127–139. https://doi.org/10.1016/0167-6636(92)90010-B
Pramanik C, Nepal D, Nathanson M, Gissinger JR, Garley A, Berry RJ, Davijani A, Kumar S, Heinz H (2018) Molecular engineering of interphases in polymer/carbon nanotube composites to reach the limits of mechanical performance. Compos Sci Technol 166:86–94. https://doi.org/10.1016/j.compscitech.2018.04.013
Prolongo MG, Salom C, Arribas C, Sánchez-Cabezudo M, Masegosa RM, Prolongo SG (2016) Influence of graphene nanoplatelets on curing and mechanical properties of graphene/epoxy nanocomposites. J Therm Anal Calorim 125:629–636. https://doi.org/10.1007/s10973-015-5162-3
Rafiee R, Shahzadi R (2019) Mechanical properties of nanoclay and nanoclay reinforced polymers: a review. Polym Compos 40:431–445. https://doi.org/10.1002/pc.24725
Reichert I, Olney P, Lahmer T (2019) Influence of the error description on model-based design of experiments. Eng Struct 193:100–109. https://doi.org/10.1016/j.engstruct.2019.05.002
Safaei B (2020) The effect of embedding a porous core on the free vibration behavior of laminated composite plates. Steel Compos Struct 35:659–670. https://doi.org/10.12989/SCS.2020.35.5.659
Safaei B, Naseradinmousavi P, Rahmani A (2016) Development of an accurate molecular mechanics model for buckling behavior of multi-walled carbon nanotubes under axial compression. J Mol Graph Model 65:43–60. https://doi.org/10.1016/j.jmgm.2016.02.001
Sahmani S, Aghdam MM (2018) Thermo-electro-radial coupling nonlinear instability of piezoelectric shear deformable nanoshells via nonlocal elasticity theory. Microsyst Technol 24:1333–1346. https://doi.org/10.1007/s00542-017-3512-8
Sahmani S, Fattahi AM (2018) Development of efficient size-dependent plate models for axial buckling of single-layered graphene nanosheets using molecular dynamics simulation. Microsyst Technol 24:1265–1277. https://doi.org/10.1007/s00542-017-3497-3
Sahmani S, Madyira DM (2019) Nonlocal strain gradient nonlinear primary resonance of micro/nano-beams made of GPL reinforced FG porous nanocomposite materials. Mech Based Des Struct Mach. https://doi.org/10.1080/15397734.2019.1695627
Sahmani S, Safaei B (2021) Large-amplitude oscillations of composite conical nanoshells with in-plane heterogeneity including surface stress effect. Appl Math Model 89:1792–1813. https://doi.org/10.1016/j.apm.2020.08.039
Sahmani S, Aghdam MM, Bahrami M (2017) An efficient size-dependent shear deformable shell model and molecular dynamics simulation for axial instability analysis of silicon nanoshells. J Mol Graph Model 77:263–279. https://doi.org/10.1016/j.jmgm.2017.08.015
Sahmani S, Fotouhi M, Aghdam MM (2019) Size-dependent nonlinear secondary resonance of micro-/nano-beams made of nano-porous biomaterials including truncated cube cells. Acta Mech 230:1077–1103. https://doi.org/10.1007/s00707-018-2334-9
Savvas D, Stefanou G (2018) Determination of random material properties of graphene sheets with different types of defects. Compos B Eng 143:47–54. https://doi.org/10.1016/j.compositesb.2018.01.008
Shi G, Araby S, Gibson CT, Meng Q, Zhu S, Ma J (2018) Graphene platelets and their polymer composites: fabrication, structure, properties, and applications. Adv Funct Mater 28:1706705. https://doi.org/10.1002/adfm.201706705
Soler-Crespo RA, Gao W, Xiao P, Wei X, Paci JT, Henkelman G, Espinosa HD (2016) Engineering the mechanical properties of monolayer graphene oxide at the atomic level. J Phys Chem Lett 7:2702–2707. https://doi.org/10.1021/acs.jpclett.6b01027
Subramanian N, Rai A, Chattopadhyay A (2015) Atomistically informed stochastic multiscale model to predict the behavior of carbon nanotube-enhanced nanocomposites. Carbon 94:661–672. https://doi.org/10.1016/j.carbon.2015.07.051
Subramanian N, Koo B, Rai A, Chattopadhyay A (2018) Molecular dynamics-based multiscale damage initiation model for CNT/epoxy nanopolymers. J Mater Sci 53:2604–2617. https://doi.org/10.1007/s10853-017-1733-y
Verma A, Parashar A, Packirisamy M (2018) Atomistic modeling of graphene/hexagonal boron nitride polymer nanocomposites: a review. Wiley Interdiscip Rev Comput Mol Sci 8:e1346. https://doi.org/10.1002/wcms.1346
Wagner HD, Vaia RA (2004) Nanocomposites: issues at the interface. Mater Today 7:38–42. https://doi.org/10.1016/S1369-7021(04)00507-3
Wang F, Drzal LT, Qin Y, Huang Z (2015a) Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites. J Mater Sci 50:1082–1093. https://doi.org/10.1007/s10853-014-8665-6
Wang Y, Yu J, Dai W, Song Y, Wang D, Zeng L, Jiang N (2015b) Enhanced thermal and electrical properties of epoxy composites reinforced with graphene nanoplatelets. Polym Compos 36:556–565. https://doi.org/10.1002/pc.22972
Wang X, Zhou G, Safaei B, Sahmani S (2020) Boundary layer modeling of surface residual tension in postbuckling behavior of axially loaded silicon panels at nanoscale embedded in elastic foundations. Mech Based Des Struct Mach. https://doi.org/10.1080/15397734.2020.1794889
Weng S, Ning H, Fu T, Hu N, Zhao Y, Huang C, Peng X (2018) Molecular dynamics study of strengthening mechanism of nanolaminated graphene/Cu composites under compression. Sci Rep 8:1–10. https://doi.org/10.1038/s41598-018-21390-1
Xie B, Li Q, Zeng K, Sahmani S, Madyira DM (2020) Instability analysis of silicon cylindrical nanoshells under axial compressive load using molecular dynamics simulations. Microsyst Technol 26:3753–3764. https://doi.org/10.1007/s00542-020-04851-4
Yang Z, Tam M, Zhang Y, Kitipornchai S, Lv J, Yang J (2020a) Nonlinear dynamic response of FG graphene platelets reinforced composite beam with edge cracks in thermal environment. Int J Struct Stab Dyn 1:2043005. https://doi.org/10.1142/s0219455420430051
Yang Z, Zhao S, Yang J, Lv J, Liu A, Fu J (2020b) In-plane and out-of-plane free vibrations of functionally graded composite arches with graphene reinforcements. Mech Adv Mater Struct 1:1–11. https://doi.org/10.1080/15376494.2020.1716420
Zakaria MR, Kudus MHA, Akil HM, Thirmizir MZM (2017) Comparative study of graphene nanoparticle and multiwall carbon nanotube filled epoxy nanocomposites based on mechanical, thermal and dielectric properties. Compos B Eng 119:57–66. https://doi.org/10.1016/j.compositesb.2017.03.023
Zaman I, Kuan HC, Dai J, Kawashima N, Michelmore A, Sovi A, Dong S, Luong L, Ma J (2012) From carbon nanotubes and silicate layers to graphene platelets for polymer nanocomposites. Nanoscale 4:4578–4586. https://doi.org/10.1039/C2NR30837A
Zargar O, Mollaghaee-Roozbahani M, Bashirpour M, Baghani M (2019) The application of homotopy analysis method to determine the thermal response of convective-radiative porous fins with temperature-dependent properties. Int J Appl Mech 11:1950089. https://doi.org/10.1142/S1758825119500893
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
This article has been retracted. Please see the retraction notice for more detail: https://doi.org/10.1007/s00542-023-05434-9
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Wang, Y., Ermilov, V., Strigin, S. et al. RETRACTED ARTICLE: Multilevel modeling of the mechanical properties of graphene nanocomposites/polymer composites. Microsyst Technol 27, 4241–4251 (2021). https://doi.org/10.1007/s00542-021-05218-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-021-05218-z