Abstract
Accelerometers are one of the simplest and most important applications of Micro-Electromechanical Systems (MEMS). This paper deals with the design, analysis and Design of Experiments (DOE) of a MEMS-based capacitive accelerometer for automotive applications. The key design parameters to be considered while designing an accelerometer are the sensitivity and the bandwidth of operation. The present work focuses on the design and improvement of an accelerometer to ensure that it operates for a larger bandwidth without compromising on the sensitivity. The structural parameters, overall dimensions and size of the accelerometer are first identified. Subsequently, a parametric analysis is performed using \({2}^{k}\) Design of Experiments for various g values from 5 to 50 g totalling 40 runs. Depending on the level of influence, these structural parameters are then modified for an improved accelerometer design. Later, a sensitivity analysis is performed. It was seen that the improved design performed better than the rest. A Modal analysis was also performed to determine the resonant/natural frequencies and the mode shapes. It was found that the presented design is safe to operate. This method of approach would help in arriving at a better accelerometer for the desired application.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Durakovic B (2017) Design of experiments application, concepts, examples: state of the art. Period Eng Nat Sci 5(3):421–439
Kavitha S, Joseph Daniel R, Sumangala K (2016) Design and analysis of MEMS comb drive capacitive accelerometer for shm and seismic applications. Measurement 93:327–339
Kendall J, Solomon AK (2014) Air bag deployment criteria. The forensic examiner, collision safety institute. https://fliphtml5.com/ihyh/uxzc/basic. Accessed 12 Aug 2020
Keshavarzi M, Yavand Hasani J (2018) Design and optimization of fully differential capacitive MEMS accelerometer based on surface micromachining. Microsyst Technol 25:1369–1377. https://doi.org/10.1007/s00542-018-4187-5
Khan S (2014) Improving the sensitivity and bandwidth of in-plane capacitive accelerometers using compliant mechanical amplfiers. J Micro Electro Mech Syst 23(4):871–886
Kraft M (2000) Micromachined inertial sensors: the State-of-the-Art and a look into the future. Inst Measur Control 33(6):164–168. https://doi.org/10.1177/002029400003300601
Lawrence A (1993) Modern inertial technology: navigation, guidance, and control. Springer
Mahmood S, Celik-Butler Z, Butler DP (2017) Design, fabrication and characterization of flexible MEMS accelerometer using multi-level UV-LIGA. Sens Actuators A Phys 263(15):530–541. https://doi.org/10.1016/j.sna.2017.07.007
Murphy C (2017) Choosing the most suitable MEMS accelerometer for your application-part 1, vol 51. https://www.analog.com/en/analog-dialogue/articles/choosing-the-most-suitable-mems-accelerometer-for-your-application-part-1.html#. Accessed 12 Aug 2020
Peters E, Vergote S, Puers B, Sansen W (1992) A highly symmetrical capacitive micro-accelerometer with single degree-of-freedom response. J Micromech Microeng Struct Devices Syst 2(2):104–112
ReliaSoft Corporation (2015) Experiment design & analysis reference. http://www.synthesisplatform.net/references/Experiment_Design_and_Analysis_Reference.pdf. Accessed 12 Aug 2020
Sharma K, Macwan, I, Zhang L, Hmurick L, Xiong, X (2009) Design optimization of MEMS comb accelerometer. American Society for Engineering Education, Annual Conference & Exposition, Austin, Texas. https://peer.asee.org/4555
Sujatha L, Kalaiselvi S, Vigneswaran N (2016) Out-of-plane characterization of silicon-on-insulator multiuser MEMS processes-based tri-axis accelerometer. Sens Transducers 205(10):63–71
Sun C, Tsai M, Liu Y, Fang W (2010) Implementation of a monolithic single proof-mass tri-axis accelerometer using CMOS-MEMS technique. IEEE Trans Electron Devices 57(7):1670–1679. https://doi.org/10.1109/TED.2010.2048791
Terzioglu Y, Kose T, Azgin K, Akin T (2015) A simple out-of-plane capacitive MEMS accelerometer utilizing lateral and vertical electrodes for differential sensing. IEEE SENSORS, Busan, pp 1–3
Tez S, Aykutlu U, Torunbalci MM, Akin T (2015) A bulk-micromachined three-axis capacitive MEMS accelerometer on a single die. J Microelectromech Syst 24(5):1264–1274. https://doi.org/10.1109/JMEMS.2015.2451079
Wagner Jr JR, Mount III EM, Giles Jr HF (2014) Design of experiments in extrusion (Second Edition). In: The definitive processing guide and handbook, pp 291–308. https://doi.org/10.1016/B978-1-4377-3481-2.00025-9
Wang J, Yang Z, Yan G (2012) Silicon-on-insulator out-of-plane electrostatic actuator with in situ capacitive position sensing. J Micro/Nanolith MEMS MOEMS 11(3):1–8
White T, Petsch K, Kaya T (2014) Evaluation of the silicon on glass microfabrication process for MEMS accelerometers. In: Proceedings of the 2014 IAJC-ISAM international conference. ISBN 978-1-60643-379-9. http://cd14.ijme.us/papers/019__Thomas%20S%20White%2C%20Kevin%20Petsch%2C%20Tolga%20Kaya.pdf
Yang M (2014) Statistical analysis of unreplicated factorial designs using contrasts. Electronic Theses and Dissertations, 1147. https://digitalcommons.georgiasouthern.edu/etd/1147. Accessed 12 Aug 2020
Zhang Y, Yang G, Gao C et al (2013) A MEMS sandwich differential capacitive silicon-on-insulator accelerometer. Microsyst Technol 19:1249–1254. https://doi.org/10.1007/s00542-012-1726-3
Zhou X, Che L, Liang S et al (2008) Design and fabrication of a MEMS capacitive accelerometer with fully symmetrical double-sided H-shaped beam structure. Microelectron Eng 131:51–57
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Ramakrishnan, J., Gaurav, P.T.R., Chandar, N.S. et al. Structural design, analysis and DOE of MEMS-based capacitive accelerometer for automotive airbag application. Microsyst Technol 27, 763–777 (2021). https://doi.org/10.1007/s00542-020-04979-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-020-04979-3