Abstract
In this work, the operation of an active self-recovery mechanism embedded within microelectromechanical systems (MEMS) switches for Radio Frequency (RF) passives (i.e. RF-MEMS) is reported and discussed. The mechanism is able to counteract stiction induced by charge accumulation and micro-welding formation. It is based on the thermoelectric effect, allowing restoring the MEMS switch back to normal operation after failure. The goal is achieved by means of two factors, namely, the entrapped charges dispersion speed-up within the insulating layer between the electrodes, and the application of shear forces on the welding joints, both induced by the heat. Preliminary experimental results, collected by a few fabricated RF-MEMS switch samples, confirm the viability of the proposed approach. Moreover, the coupled thermos-electro-mechanical multi-physical behaviour of the discussed RF-MEMS switch is also analysed by means of Finite Element Method simulations. In particular, the results of experiments carried out with a dynamic 3D profiling setup show that when driving a current through a micro-heater embedded under the MEMS intentionally brought to stiction due to charge accumulation, the release of the switching membrane and the restoration of its operability is speeded-up. In addition, the reported characterisation includes also the pull-in/pull-out characteristic and the RF measurement of the S-parameters (scattering parameters).
Similar content being viewed by others
References
Bakri-Kassem M, Mansour RR, Safavi-Naeini S (2011) Novel millimeter-wave slow-wave phase shifter using MEMS technology. In: Proceedings of the European microwave conference, pp 1079–1082. https://doi.org/10.23919/eumc.2011.6101709
Cazzorla A, Sorrentino R, Farinelli P (2015) Double-actuation extended tuning range RF MEMS varactor. In: Proceedings of the European microwave conference (EuMC), pp 937–940. https://doi.org/10.1109/eumc.2015.734591
Chen L-C, Huang Y-T, Chang P-B (2006) High-bandwidth dynamic full-field profilometry for nano-scale characterization of MEMS. J Phys: Conf Ser 48:1058–1062. https://doi.org/10.1088/1742-6596/48/1/197
Daneshmand M, Mansour RR (2007) Redundancy RF MEMS multiport switches and switch matrices. IEEE J Microelectromech Syst 16:296–303. https://doi.org/10.1109/JMEMS.2007.892891
De Los Santos HJ (2002) RF mems circuit design for wireless communications. Artech House, Boston
Fung C (2005) Industry study on issues of MEMS reliability and accelerated lifetime testing. In: Proceedings of the IEEE annual international reliability physics symposium, pp 312–316. https://doi.org/10.1109/relphy.2005.1493104
Goldsmith CL, Zhimin Y, Eshelman S, Denniston D (1998) Performance of low-loss RF MEMS capacitive switches. Microw Guided Wave Lett 8:269–271. https://doi.org/10.1109/75.704410
Grenier K, Dubuc D, Ducarouge B, Conedera V, Bourrier D, Ongareau E, Derderian P, Plana R (2005) High power handling RF MEMS design and technology. In: Proceedings of the IEEE international conference on micro electro mechanical systems (MEMS), pp 155–158. https://doi.org/10.1109/memsys.2005.1453890
Hartzell AL, da Silva MG, Shea H (2011) MEMS reliability. Springer, New York. https://doi.org/10.1007/978-1-4419-6018-4
Hikmat OF, Mohamed Ali MS (2017) RF MEMS inductors and their applications—a review. IEEE J Microelectromech Syst 26:17–44. https://doi.org/10.1109/JMEMS.2016.2627039
Hyung SI, Young JY, Dong-Hoon C, Jun-Bo Y (2008) High-Q, tunable-gap MEMS variable capacitor actuated with an electrically floating plate. In: Proceedings of the IEEE international conference on micro electro mechanical systems (MEMS), pp 180–183. https://doi.org/10.1109/memsys.2008.4443622
Iannacci J (2017) RF-MEMS technology for high-performance passives. The challenge of 5G mobile applications. IOP Publishing, Bristol. https://doi.org/10.1088/978-0-7503-1545-6
Iannacci J (2018a) RF-MEMS technology as an enabler of 5G: low-loss ohmic switch tested up to 110 GHz. Sens Actuators A Phys 279:624–629. https://doi.org/10.1016/j.sna.2018.07.005
Iannacci J (2018b) Internet of things (IoT); internet of everything (IoE); tactile internet; 5G—a (not so evanescent) unifying vision empowered by EH-MEMS (energy harvesting MEMS) and RF-MEMS (radio frequency MEMS). Sens Actuators A Phys 272:187–198. https://doi.org/10.1016/j.sna.2018.01.038
Iannacci J, Giacomozzi F, Colpo S, Margesin B, Bartek M (2009) A general purpose reconfigurable MEMS-based attenuator for radio frequency and microwave applications. In: Proceedings of the IEEE EUROCON, pp 1197–1205. https://doi.org/10.1109/eurcon.2009.5167788
Iannacci J, Repchankova A, Macii D, Niessner M (2009) A measurement procedure of technology-related model parameters for enhanced RF-MEMS design. In: Proceedings of the IEEE international workshop on advanced methods for uncertainty estimation in measurement (AMUEM), pp 44–49. https://doi.org/10.1109/amuem.2009.5207609
Iannacci J, Repchankova A, Faes A, Tazzoli A, Meneghesso G, Dalla Betta GF (2010) Enhancement of RF-MEMS switch reliability through an active anti-stiction heat-based mechanism. Microelectron Reliab 50:1599–1603. https://doi.org/10.1016/j.microrel.2010.07.108
Iannacci J, Faes A, Repchankova A, Tazzoli A, Meneghesso G (2011) An active heat-based restoring mechanism for improving the reliability of RF-MEMS switches. Microelectron Reliab 51:1869–1873. https://doi.org/10.1016/j.microrel.2011.06.019
Iannacci J, Huhn M, Tschoban C, Pötter H (2016) RF-MEMS technology for 5G: series and shunt attenuator modules demonstrated up to 110 GHz. IEEE Electron Device Lett 37:1336–1339. https://doi.org/10.1109/LED.2016.2604426
Khaira NK, Singh T, Mansour RR (2018) RF MEMS based 60 GHz variable attenuator. In: Proceedings of the IEEE MTT-s international microwave workshop series on advanced materials and processes for RF and THz applications (IMWS-AMP), pp 1–3. https://doi.org/10.1109/imws-amp.2018.8457154
Larcher L, Brama R, Ganzerli M, Iannacci J, Margesin B, Bedani M, Gnudi A (2009) A MEMS reconfigurable quad-band class-E power amplifier for GSM standard. In: Proceedings of the IEEE MEMS conference, pp 864–867. https://doi.org/10.1109/date.2009.5090689
Lee H-C, Park J-H, Park Y-H (2007) Development of shunt type ohmic RF MEMS switches actuated by piezoelectric cantilever. Sens Actuators A Phys 136:282–290. https://doi.org/10.1016/j.sna.2006.10.050
Lu Y, Peroulis D, Mohammadi S, Katehi LPB (2003) A MEMS reconfigurable matching network for a class AB amplifier. IEEE Microw Wirel Compon Lett 13:437–439. https://doi.org/10.1109/LMWC.2003.818523
Melle S, Bordas C, Dubuc D, Grenier K, Vendier O, Muraro JL, Cazaux JL, Plana R (2007) Investigation of stiction effect in electrostatic actuated RF MEMS devices. In: Proceedings of the topical meeting on silicon monolithic integrated circuits in RF systems, pp 173–176. https://doi.org/10.1109/smic.2007.322787
Mills AF (1999) Basic heat and mass transfer. Prentice Hall, Upper Saddle River
Najafi K, Suzuki K (1989) A novel technique and structure for the measurement of intrinsic stress and Young’s modulus of thin films. In: Proceedings of the IEEE micro electro mechanical systems—an investigation of micro structures, sensors, actuators, machines and robots, pp 96–97. https://doi.org/10.1109/memsys.1989.77969
Papaioannou G, Papapolymerou J (2007) Dielectric charging mechanisms in RF-MEMS capacitive switches. In: Proceedings of the European microwave integrated circuits conference, pp 359–362. https://doi.org/10.1109/emicc.2007.4412723
Papaioannou G, Exarchos M-N, Theonas V, Wang G, Papapolymerou J (2005) Temperature study of the dielectric polarization effects of capacitive RF MEMS switches. IEEE Trans Microw Theory Tech 53:3467–3473. https://doi.org/10.1109/TMTT.2005.857336
Papaioannou G, Papandreou E, Papapolymerou J, Daigler R (2007) Dielectric discharging processes in RF-MEMS capacitive switches. In: Proceedings of the IEEE Asia–Pacific microwave conference (APMC), pp 1–4. https://doi.org/10.1109/apmc.2007.4554527
Peroulis D, Pacheco SP, Sarabandi K, Katehi LPB (2001) Alleviating the adverse effects of residual stress in RF MEMS switches. In: Proceedings of the European microwave conference, pp 1–4. https://doi.org/10.1109/euma.2001.339166
Rebeiz GM (2003) RF MEMS: theory, design, and technology. Wiley, Hoboken. https://doi.org/10.1002/0471225282
Sedaghat-Pisheh H, Rebeiz GM (2009) A compact SPDT RF MEMS switch with high contact force. In: Proceedings of the IEEE MTT-S international microwave symposium, pp 1213–1216. https://doi.org/10.1109/mwsym.2009.5165921
Singh T, Khaira NK, Mansour RR (2019) Monolithically integrated reconfigurable RF MEMS based impedance tuner on SOI substrate. In: Proceedings of the IEEE MTT-S international microwave symposium (IMS), pp 790–792. https://doi.org/10.1109/mwsym.2019.8701106
Thompson MK, Thompson JM (2017) ANSYS mechanical APDL for finite element analysis. Elsevier, Amsterdam
Topalli K, Aydin Civi O, Demir S, Koc S, Akin T (2008) A monolithic phased array using 3-bit DMTL RF MEMS phase shifters. IEEE Trans Microw Theory Tech 56:270–277. https://doi.org/10.1109/APS.2006.1710573
Zhao Y (2003) Stiction and anti-stiction in MEMS and NEMS. Chin J Mech Acta Mech Sin 19:1–10. https://doi.org/10.1007/BF02487448
Zine-El-Abidine I, Okoniewski M, McRory JG (2003) A new class of tunable RF MEMS inductors. In: Proceedings of the international conference on MEMS, NANO and smart systems, pp 114–115. https://doi.org/10.1109/icmens.2003.1221976
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Iannacci, J. Towards improved reliability of RF-MEMS: mechanical aspects and experimental testing of a micro-switch design with embedded active self-recovery mechanism to counteract stiction. Microsyst Technol 26, 3917–3926 (2020). https://doi.org/10.1007/s00542-020-04886-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-020-04886-7