Abstract
In this paper we have analyzed the influence of the membrane inherent residual stress along with its Young’s modulus for evaluating the characteristics of a capacitive micromachined ultrasonic transducer (CMUT) for medical imaging and sensor applications. The membrane displacement profile, the frequency response characteristic and the coupling coefficient are evaluated and a close conformity with the PZFlex Finite Element method (FEM) simulations has been confirmed. The variation of the coupling coefficient with the different structural parameters indicates the use of thinner membranes with lower transduction gap as efficient transducers. Moreover, coupling factor increases as bias increases and an investigation of the collapse voltage is essential. Various coupling mediums are analyzed to find the transducer equivalent resistance and quality factor to predict its utility as a sensor for gaseous and liquid coupling mediums.
Similar content being viewed by others
References
Ahrens O, Hohlfeld D, Buhrdorf A, Glitza O, Binder J (2000) A new class of capacitive micromachined ultrasonic transducers. Proc IEEE Ultrason Symp 2000:939–942
Boulmé A, Ngo S, Minonzio JG, Legros M, Talmant M, Laugier P, Certon D (2014) A capacitive micromachined ultrasonic transducer probe for assessment of cortical bone. IEEE Trans Ultrason Ferroelectr Freq Control 61(4):710–723
Cour M, Christiansen T, Jensen J, Thomsen E (2015) Electrostatic and small-signal analysis of CMUTs with circular and square anisotropic plates. IEEE Trans Ultrason Ferroelectr Freq Control 62(8):1563–1579
Ergun AS, Huang YL, Zhuang XF, Oralkan O, Yaralioglu G, Khuri-Yakub BT (2005) Capacitive micromachined ultrasonic transducers: fabrication technology. IEEE Trans Ultrason Ferroelectr Freq Control 52(12):2242–2258
Hohlfeld K, Michaelis A, Gebhardt S (2013) Piezoelectric transducers on the basis of free-formed PZT components. IEEE Proc Int Symp Appl Ferroelectr 2013:279–282
Maity NP, Maity R, Thapa RK, Baishya S (2016) A tunneling current density model for ultra thin HfO2 high-k dielectric material based MOS devices. Superlattices Microstruct 95:24–32
Maity R, Maity NP, Thapa RK, Baishya S (2017a) An improved analytical and finite element method model of nanoelectromechanical system based micromachined ultrasonic transducers. Microsyst Technol 23(6):2163–2173
Maity R, Maity NP, Baishya S (2017b) Circular membrane approximation model with the effect of the finiteness of the electrode’s diameter of MEMS capacitive micromachined ultrasonic transducers. Microsyst Technol 23(8):3513–3524
Maity NP, Maity R, Baishya S (2017c) Voltage and oxide thickness dependent tunneling current density and tunnel resistivity model: application to high-k material HfO2 based MOS devices. Superlattices Microstruct 111:628–641
Maity R, Maity NP, Guha K, Baishya S (2018a) Analysis of spring softening effect on the collapse voltage of capacitive MEMS ultrasonic transducers. Microsyst Technol. https://doi.org/10.1007/s00542-018-4040-x
Maity R, Maity NP, Srinivasa RK, Guha K, Baishya S (2018b) A new compact analytical model of nano-electro-mechanical-systems based capacitive micromachined ultrasonic transducers for pulse echo imaging. J Comput Electron (Published online on 30th April, 2018)
Miao J, Wang H, Li P, Shen W, Xue C, Xiong J (2016) Glass-SOI-based hybrid-bonded capacitive micromachined ultrasonic transducer with hermetic cavities for immersion applications. IEEE J Microelectromech Syst 25(5):976–986
Mills DM, Smith SW (1999) Multi-layered PZT/polymer composites to increase signal-to-noise ratio and resolution for medical ultrasound transducers. IEEE Trans Ultrason Ferroelectr Freq Control 46(4):961–971
N’Djin W, Gerold B, Bailly J, Canney M, Nguyen-Dinh A, Carpentier A, Chapelon J (2017) Capacitive micromachined ultrasound transducers for interstitial high-intensity ultrasound therapies. IEEE Trans Ultrason Ferroelectr Frequency Control 64(8):1245–1260
Na S, Zheng Z, Chen A, Wong L, Li Z, Yeow J (2017) Design and fabrication of a high-power air-coupled capacitive micromachined ultrasonic transducer array with concentric annular cells. IEEE Trans Electron Devices 64(11):4636–4643
Roy R, Farhanieh O, Ergun A, Bozkurt A (2017) Fabrication of high-efficiency CMUTs with reduced parasitics using embedded metallic layers. IEEE Sens J 17(13):4013–4020
Yildiz F, Matsunanga T, Haga Y (2016) Capacitive micromachined ultrasonic transducer arrays incorporating anodically bondable low temperature co-fired ceramic for small diameter ultrasonic endoscope. IET Micro Nano Lett 11(10):627–631
Zhang Q, Cicek P, Allidina K, Nabki F, Ei-Gamal M (2014) Surface micromachined CMUT using low temperature deposited silicon carbide membranes for above-IC integration. IEEE J Micromech Syst 23(2):482–493
Zhang X, Yamancer FY, Oralkan O (2017) Fabrication of vacuum-sealed-capacitive micromachined ultrasonic transducers with through glass via interconnects using anodic bonding. IEEE J Micromech Syst 26(1):226–234
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Maity, R., Gogoi, K. & Maity, N.P. Micro-electro-mechanical-system based capacitive ultrasonic transducer as an efficient immersion sensor. Microsyst Technol 25, 4663–4670 (2019). https://doi.org/10.1007/s00542-019-04384-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-019-04384-5