Advertisement

Micro-nano 3D printing of electronically conductive polymers as a new process for achieving higher electronic conductivities

  • K. Yamada
  • Y. Magori
  • S. Akimoto
  • J. Sone
Technical Paper
  • 83 Downloads

Abstract

We have already reported multi-photon excitation of tris(2,2′-bipyridyl)ruthenium complex [Ru(bpy) 3 2+ ] by femtosecond pulse laser with near infrared wavelength as the light sources, the multi-photon sensitized polymerization of pyrrole and the 3D printing (photo-fabrication) system of polypyrrole (PPy) by 3D scanning of the laser focal point. In the present study, the 3D printing of PPy into a Nafion sheet was carried out to evaluate the electronic conductivity of the product micro-structures formed by multi-photon sensitized polymerization. When the PPy straight line structure was drawn in the direction of the optical axis (vertical), relatively higher conductivity values (Max 410 Scm−1) were obtained in the fully-doped state. The values of over 102 Scm−1 indicated the Drude model of electrical conduction, therefore, the micro-structures would be applied to a metamaterial. On the other hand, 1 or 2 orders of magnitude lower conductivity values were obtained from the crooked line structures drawn in the vertical and horizontal directions. This difference in the conductivity would be affected by the distorted cross section of the PPy deposition and the electrically overlapping of each deposition particle.

References

  1. Cullen AT, Price AD (2018) Digital light processing 3D printing of intrinsically conductive polymer structures. Synth Met 235:34–41.  https://doi.org/10.1016/j.synthmet.2017.11.003 CrossRefGoogle Scholar
  2. Faverolle F, Attias JA, Bloch B, Audebert P, Andrieux PC (1998) Highly conducting and strongly adhering polypyrrole coating layers deposited on glass substrates by a chemical process. Chem Mater 10:740–752.  https://doi.org/10.1021/cm970466p CrossRefGoogle Scholar
  3. Hishikawa A, Takahashi JE, Matsuda A (2006) Electronic and nuclear responses of fixed-in-space H2S to ultrashort intense laser fields. Phys Rev Lett 97:243002.  https://doi.org/10.1103/PhysRevLett.97.243002 CrossRefGoogle Scholar
  4. Kurselis K, Kiyan R, Victor Bagratashvili N, Vladimir Popov K, Boris Chichkov N (2013) 3D fabrication of all-polymer conductive microstructures by two photon polymerization. Opt Express 21:31029.  https://doi.org/10.1364/OE.21.031029 CrossRefGoogle Scholar
  5. Lota K, Khomenko V, Frackowiak E (2004) Capacitance properties of poly(3,4-ethylenedioxythiophene)/carbon nanotubes composites. J Phys Chem Solids 65:295–301.  https://doi.org/10.1016/j.jpcs.2003.10.051 CrossRefGoogle Scholar
  6. Matsui T, Vardeny ZV (2006) Resonantly-enhanced transmission through a periodic array of subwavelength apertures in heavily-doped conducting polymer films. Appl Phys Lett 88:071101.  https://doi.org/10.1063/1.2175482 CrossRefGoogle Scholar
  7. Pettersson LAA, Carlsson F, Inganäs O, Arwin H (1998) Spectroscopic ellipsometry studies of the optical properties of doped poly(3,4-ethylenedioxythiophene): an anisotropic metal. Thin Solid Films 313–314:356–361.  https://doi.org/10.1016/S0040-6090(97)00846-8 CrossRefGoogle Scholar
  8. Roth S, Freund I (1981) Optical second-harmonic scattering in rat-tail tendon. Biopolmers 20:1271–1290.  https://doi.org/10.1002/bip.1981.360200613 CrossRefGoogle Scholar
  9. Yamada K, Kimura Y, Suzuki S, Sone J, Chen J, Urabe S (2006) Multiphoton-sensitized polymerization of pyrrole. Chem Lett 35:908–909.  https://doi.org/10.1246/cl.2006.908 CrossRefGoogle Scholar
  10. Yamada K, Sone J, Chen J (2009) Three-dimensional photochemical microfabrication of conductive polymers in transparent polymer sheet. Opt Rev 16:208–212.  https://doi.org/10.1007/s10043-009-0038-z CrossRefGoogle Scholar
  11. Yamada K, Kyoya A, Sone J, Chen J (2011) Evaluations of vertical resolution of conductive polymer three-dimensional microstructures photofabricated in transparent polymer sheet. Opt Rev 18:162–165.  https://doi.org/10.1007/s10043-014-0109-7 CrossRefGoogle Scholar
  12. Yamada K, Watanabe M, Sone J (2014) Three-dimensional printing of conducting polymer microstructures into transparent polymer sheet: relationship between process resolution and illumination conditions. Opt Rev 21:679–682.  https://doi.org/10.1007/s10043-014-0109-7 CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Department of Life Science and Sustainable ChemistryTokyo Polytechnic UniversityAtsugiJapan
  2. 2.Graduate School of EngineeringTokyo Polytechnic UniversityAtsugiJapan
  3. 3.Department of Applied Computer ScienceTokyo Polytechnic UniversityAtsugiJapan

Personalised recommendations