A design method and its CAD prototype system for surface micromachined MEMS devices

  • Changfu Zhang
  • Kang Yun
  • Peiyong Cheng
  • Haihong Ai
Technical Paper

Abstract

Now the MEMS design method of “bottom–up” (mask-to-shape-to-function) has been adopted widely. However, it is complicated, time-consuming and not straightforward and can’t meet the demand of MEMS development. In this paper, a 3D MEMS aided design method is studied for surface micromachined MEMS devices, which adopts the design procedure of function-to-shape-to-mask. With this method, 3D geometric models of surface micromachined MEMS devices are built by selecting 3D MEMS features from the developed feature database after functional requirement analysis and concept design have been made. After the geometric model is analyzed with FEM analysis tools, 2D candidate masks and process flow are automatically generated by analyzing geometric information and material information of the model. Meanwhile, a 3D MEMS CAD prototype system of this method is developed based on SolidWorks. Finally a torsional micromirror is designed to verify the validity of the design method and its CAD prototype system. The practical example shows that 3D MEMS design method can help designers develop MEMS devices straightforwardly and obtain 2D masks and process flow automatically, and the developed 3D MEMS CAD prototype system based on SolidWorks can make MEMS device design easily.

Notes

Acknowledgements

The authors gratefully acknowledge the support by the Shaanxi Science & Technology Co-ordination & Innovation Project under Grant Nos. 2014SZS20-Z02 and 2014SZS20-P06, Natural Science Basic Research Plan in Shaanxi Province under Grant No. 2014JM2-5072, and Key Laboratory Scientific Research Program of Shaanxi Provincial Education Department under Grant No. 13JS043.

References

  1. Ananthakrishnan V, Sarma R, Ananthasuresh GK (2003) Systematic mask synthesis for surface micromachined microelectromechanical systems. J Micromech Microeng 13(6):927–941CrossRefGoogle Scholar
  2. Ansgar W, Bernardo C, Paul H, Elisabeth W, Bastian ER (2013) Computer-aided microfluidics (CAMF): from digital 3D-CAD models to physical structures within a day. Microfluid Nanofluid 15(5):625–635CrossRefGoogle Scholar
  3. De Voe DL, Green SB, Jump JM (1998) Automated solid model extraction for MEMS visualization. In: Conference on modeling and simulation of microsystems, sensors, and actuators, Santa Clara, p 292Google Scholar
  4. Dechev N, Cleghorn WL, Mills JK (2003) Microassembly of 3D MEMS structures utilizing a MEMS microgripper with a robotic manipulator. In: IEEE international conference on robotics and automation, Taipei, p 3193Google Scholar
  5. Gao F, Sarma R (2001) A declarative feature-based cross sectional design tool for surface micromachined MEMS. In: ASME design automation conference, Pittsburgh, p 550Google Scholar
  6. Goncharenko BG, Zhukov AA, Zorin SM et al (2015) Design modeling and manufacture of 3D MEMS structures for thermal detectors. Nano-i Mikrosistemnaya Tekhnika. 8:10–15Google Scholar
  7. Kholostov K, Nenzi P, Balucani M (2012) Design and technology for 3D MEMS device for vibration energy harvesting. In: 8th conference on research in microelectronics and electronics (PRIME), Aachen, p 259Google Scholar
  8. Li JH, Liu YS, Gao SM (2005) Mask synthesis and verification based on geometric model for surface micro-machined MEMS. J Zhejiang Univ Sci 6A(9):1007–1010Google Scholar
  9. Lo NR, Pister KJ (2000) 3D MEMS design via Matlab interactive plots. In: 2000 international conference on modeling and simulation of microsystems, San Diego, p 696Google Scholar
  10. McCorquodale MS, Gebara FH, Kraver KL, Marsman ED, Senger RM, Brown RB (2003) A top–down microsystems design methodology and associated challenges. In: Design, automation and test in Europe conference and exhibition, Berlin, p 292Google Scholar
  11. Takashi O, Tsuyoshi N, Norio F, Keiichi S, Teruhisa A (2013) In: Topology optimization method using multistep mapping from 2D photomask to 3D MEMS. MEMS 2013, Taipei, p 405Google Scholar
  12. Takashi O, Tsuyoshi N, Norio F, Keiichi S, Teruhisa A (2014) Topology optimization using multistep mapping from 2D photomask to 3D structure for designing reinforcing rib. Sens Actuators A 215(8):130–135Google Scholar
  13. Venkataraman V, Sarma R, Ananthasuresh GK (2000) Part-to-art: basis for a systematic geometric design tool for surface micromachined MEMS. In: ASME Design Engineering Technical Conferences, Baltimore, p 11Google Scholar
  14. Zhang CF, Ren TA, Lu DJ, Wang Jh, Jiang ZD (2007) Automated generation of mask and process flow for surface micromachined devices. J Xi’an Jiaotong Univ 41(9):1031–1035Google Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  • Changfu Zhang
    • 1
  • Kang Yun
    • 1
  • Peiyong Cheng
    • 1
  • Haihong Ai
    • 1
  1. 1.School of Mechatronic EngineeringXi’an Technological UniversityXi’anChina

Personalised recommendations