Skip to main content
SpringerLink
Log in

Micromechanical force sensors based on SU-8 resist

  • Technical Paper
  • Published:
Microsystem Technologies Aims and scope Submit manuscript

    We’re sorry, something doesn't seem to be working properly.

    Please try refreshing the page. If that doesn't work, please contact support so we can address the problem.

Abstract

This paper presents an innovative approach to develop highly sensitive 3D force sensors. In order to increase the probing sensitivity by using a material with low Young’s Modulus, a novel force sensor design based on SU-8 polymer is realized. Therefore, a low cost fabrication process is developed accompanied by design studies and an estimation of mechanical properties of the deforming elements. This paper will present the fabrication process as well as a distinguishing set of test results, analytical results, and simulations on the characterization of the presented SU-8 force sensor. The novel SU-8 design consists of an SU-8 boss-membrane with integrated piezoresistive elements. The SU-8 membranes are structured using photolithography. The SU-8 micromechanical structures are characterized to determine film stresses, bending stiffness, displacement of the stylus, and breaking points. Included in these tests are measurement of the stress behavior at different process steps and simulation of stress distribution in the membrane at different directions of loading. In addition a comparative analytical investigation of the structures is carried out particularly with regard to the displacement of the stylus.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

References

  • Abgrall P, Conedera V, Camon H, Gue A, Nguyen N (2007) SU-8 as a structural material for labs-on-chips and microelectromechanical systems. Electrophoresis 28(24):4539–4551

    Article  Google Scholar 

  • Brand U, Nesterov V, Doering L, Bütefisch S, Peiner E, Büttgenbach S, Frühauf J (2009) New tactile sensors for micro- and nanotechnology. Technisches Messen 76(6):323–331

    Article  Google Scholar 

  • Buschow KHJ, Cahn RW, Flemings MC, Ilschner B, Kramer EJ, Mahajan S (2001) Encyclopedia of materials—Science and technology, vol 10. Elsevier, Amsterdam, pp 9251–9257

    Google Scholar 

  • Chen K (2006) Techniques in residual stress measurement for mems and their applications. In: MEMS/NEMS—Handbook techniques and applications. Springer, New York, pp 263–339

  • Elsner G (1987) Residual Stress and thermal expansion of spun-on polyimide films. J Appl Polym Sci 34:815–828

    Article  Google Scholar 

  • Gammelgaard L, Rasmussen PA, Calleja M, Vettiger P, Boisen A (2006) Microfabricated photoplastic cantilever with integrated photoplastic/carbon based piezoresistive strain sensor. Appl Phys Lett 88(11):113508

    Article  Google Scholar 

  • Gelorme JD, Cox RJ, Gutierrez SAR (1989) Photoresist composition and printed circuit boards and packages made therewith. US patent no. 4882245

  • Hammacher J, Fuelle A, Flaemig J, Saupe J (2008) Stress engineering and mechanical properties of SU-8-layers for mechanical applications. Microsyst Technol 14:1515–1523

    Article  Google Scholar 

  • Liu C (2007) Recent developments in polymer MEMS. Adv Mater 19(22):3783–3790

    Article  Google Scholar 

  • Nesterov V, Brand U (2005) Modelling and investigation of the silicon twin design 3D micro probe. J Micromech Microeng 15(3):514–520

    Article  Google Scholar 

  • Nesterov V, Brand U (2006) Modelling and investigation of the mechanical and electrical characteristics of the silicon 3D-boss microprobe for force and deflection measurements. J Micromech Microeng 16(7):1116–1127

    Article  Google Scholar 

  • Nordström M, Keller S, Lillemose M, Johansson A, Dohn S, Haefliger D, Blagoi G, Havsteen-Jakobsen M, Boisen A (2008) SU-8 cantilevers for bio/chemical sensing; fabrication, characterisation and development of novel read-out methods. Sensors 8(3):1595–1612

    Article  Google Scholar 

  • Seena V, Rajoriya A, Fernandes A, Dhale K, Pant P, Mukherji S, Rao VR (2010) Fabrication and characterization of novel polymer composite microcantilever sensors for explosive detection. In: Proceedings IEEE international conference micro electro mechanical systems (MEMS), pp 851–854

  • Smith DL (1995) Thin-film deposition—Principles and practice. In: International edn, McGraw-Hill, Boston, pp 185–197

  • Stoney GG (1909) The tension of metallic films deposited by electrolysis. Proc Royal Soc Ser A 82(553):172–175

    Article  Google Scholar 

  • Thomas ME, Hartnett MP, McKay JE (1988) The use of surface profilometers for the measurement of wafer curvature. J Vac Sci Technol A 6:2570–2571

    Article  Google Scholar 

  • Tibrewala A, Phataralaoha A, Büttgenbach S (2008) Simulation, fabrication and characterization of a 3D piezoresistive force sensor. Sens Actuators A Phys 147(2):430–435

    Article  Google Scholar 

  • Tibrewala A, Hofmann N, Phataralaoha A, Jäger G, Büttgenbach S (2009a) Development of 3D force sensors for nanopositioning and nanomeasuring machine. Sensors 9(5):3228–3239

    Article  Google Scholar 

  • Tibrewala A, Phataralaoha A, Büttgenbach S (2009b) Development, fabrication and characterization of a 3D tactile sensor. J Micromech Microeng 19(12):125005

    Article  Google Scholar 

Download references

Acknowledgments

The support of the Deutsche Forschungsgemeinschaft (DFG) is gratefully acknowledged.

Author information

Authors and Affiliations

  1. Institute for Microtechnology, Technische Universität Braunschweig, Alte Salzdahlumer Str. 203, 38124, Braunschweig, Germany

    A. Jordan & S. Büttgenbach

Authors
  1. A. Jordan
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. Büttgenbach
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to A. Jordan.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Jordan, A., Büttgenbach, S. Micromechanical force sensors based on SU-8 resist. Microsyst Technol 18, 1095–1101 (2012). https://doi.org/10.1007/s00542-012-1447-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00542-012-1447-7

Keywords

Search

Navigation