Abstract
The design and fabrication process of an integrated micro energy harvester capable of harvesting electrical energy from low amplitude mechanical vibrations is presented. A specific feature of the presented energy harvester design is its capability to harvest vibrational energy from different directions (3D). This is done through an innovative approach of electrets placed on vertical sidewalls, allowing miniaturization of 3D capacitive energy harvester fabrication on monolithic CMOS substrates. A new simple electret charging method using ionic hair-dryers is used. The charging performance of SiO2 and CYTOP electrets are characterized for electrets in horizontal arrangement and electrets deposited on vertical sidewalls.
Similar content being viewed by others
References
Arakawa Y, Suzuki Y, Kasaki N (2004) Micro Seismic power generator using electrets polymer film. Power MEMS 2004, Kyoto, Japan, pp 187–190
Basset P, Galayko D, Paracha AM, Marty F, Dudka A, Bourouina T (2009) A batch-fabricated and electret-free silicon electrostatic vibration energy harvester. J Micromech Microeng 19(11):115025. doi:10.1088/0960-1317/19/11/115025
Boland J, Chao Y, Suzuki Y, Tai Y (2003) Micro Electret Power generator. IEEE 2003:538–541
Edamoto M, Suzuki Y, Kasagi N, Kashiwagi K, Morizawa Y, Yokoyama T, Seki T, Oba M (2009) Low-resonant-frequency micro electret generator for energy harvesting application. Proceedings of the IEEE International Conference on MEMS, pp 1059–1062
Honzumi M, Ueno A, Hagiwara K, Suzuki Y, Tajima T, Kasagi N (2010) Soft-X-ray-charged vertical electrets and its application to electrostatic transducers. Proceedings of MEMS 2010, Hongkong, pp 635–638
Kiziroglou ME, He CR, Yeatman EM (2009) Rolling rod electrostatic microgenerator. IEEE Trans Ind Electron 56(4):1101–1108. doi:10.1109/TIE.2008.2004381
Mescheder U, Urbanovic P, Müller B, Baborie S (2009) Properties of SiO2 electret films charged by ion implantation for MEMS-based energy harvesting systems. J Micromech Microeng 19(9):094003. doi:10.1088/0960-1317/19/9/094003
Mitcheson PD, Green TC, Yeatman EM, Holmes AS (2004) Architectures for vibration-driven micropower generators. J Microelectromech Syst 13(3):429–440. doi:10.1109/JMEMS.2004.830151
Nguyen DS, Halvorsen E, Jensen GU, Vogl A (2010) Fabrication and characterization of a wideband MEMS energy harvester utilizing nonlinear springs. J Micromech Microeng 20(12):125009. doi:10.1088/0960-1317/20/12/125009
Nimo A, Mescheder U (2010) 3D capacitive vibrational harvester for autonomous lowpower sensors. Proc Power MEMS 2010. Poster paper, pp 49–52
Saad A, Mescheder U, Müller B, Nimo A (2010) High-efficient, low-cost electret charging set-up for MEMS-based energy harvesting systems. Proc Power MEMS 2010. Poster paper, pp 61–64
Scott Meninger, Oscar Mur-Miranda Jose, Rajeevan Amirtharajah, Chandrakasan Anantha P, Lang Jeffrey H (2001) Vibration-to-electric energy conversion. IEEE VLSI Syst 9(1):64–75
Tsutsumino T, Suzuki Y, Kasagi N, Sakane Y, and Suzuki Yuji (2006) Seismic power generator using high-performance polymer electret. Proceedings of the IEEE International Conference on MEMS, pp 98–101
Williams CB, Yates RB (1996) Analysis of a micro-electric generator for microsystems. Sensors and Actuator A 52:8–11
Yamashita Kiyotaka, Honzumi Makoto, Hagiwara Kei, Iguchi Yoshinori, Suzuki Yuji (2010) Vibration-driven MEMS energy harvester with vertical electrets. Proc PowerMEMS 2010. Oral paper, pp 165–168
Zhang J, Chen Z, Hao Y, Wen Z, Jin Y, Wen Zhiyu (2007) PECVD SiO2/Si3N4 double layers electrets for application in MEMS power generator. PowerMEMS 2007, Germany, Freiburg, pp 105–108
Acknowledgments
The work has been supported by the State Baden-Wuerttemberg within the research programme “Innovative Projekte”. Thanks also to Alexander Filbert and Khurram Ashraf for experimental support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mescheder, U., Nimo, A., Müller, B. et al. Micro harvester using isotropic charging of electrets deposited on vertical sidewalls for conversion of 3D vibrational energy. Microsyst Technol 18, 931–943 (2012). https://doi.org/10.1007/s00542-011-1418-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-011-1418-4