References
Albrecht TR, Sai F (1999) Load/unload technology for disk drives. IEEE Trans Magn 35(2):857–862
Campbell SG (1987) Magnetically biased aerodynamically released integral safety latch for rigid disk drive. US Patent 4,692,829
Chew D (2002) Disk drive latching assembly. US Patent 6,462,813 B1
Chang J et al (2005) Pawl latch mechanism design and control for load/unload technology. Microsyst Technol 11:747–750
Funabashi K et al (2005) Magnetic disk apparatus. US Patent 0,190,504 A1
Hickox TA, Battu R, Gollbach LW (1996) Anti-rotation air vane inertia latch. US Patent 5,555,146
Liu Y et al (2007a) Latch apparatus for latching an actuator arm assembly in a disk drive. US Patent 7,203,019
Liu Y et al (2007b) Characteristics of ramp load of hard disk drive with magnetic bias and inertia latch. In: ASME international design engineering technical conferences. Las Vegas, 4–7 September 2007
Ratliff RT, Pagilla PR (2005) Design, modeling, and seek control of a voice-coil motor actuator with nonlinear magnetic bias. IEEE Trans Magn 41(6):2180–2188
Suk M, Jen D (1998) Potential data loss due to head/disk contacts during dynamics load/unload. IEEE Trans Magn 34(4):1711–1713
Acknowledgments
The first author would like to thank Samsung Information Systems America for the opportunity to conduct this research when he was an employee there.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, Y., (Sean) Kang, S.W. & (Paul) Chang, S. Inertia magnetic latch design considering actuator load unload. Microsyst Technol 15, 703–712 (2009). https://doi.org/10.1007/s00542-008-0771-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-008-0771-4