Abstract
In this thesis, fabrication technology of a freestanding micro mechanical structure using electroplated thick metal with a high-aspect-ratio SU-8 mold was studied. A cost-effective fabrication process using electroplating with the SU-8 mold was developed without expensive equipment and materials such as deep reactive-ion etching (DRIE) or a silicon-on-insulator (SOI) wafer. The process factors and methods for the removal of SU-8 were studied as a key technique of the thick metal micro mechanical structure. A novel method that removes cross-linked SU-8 completely without leaving remnants of the resist or altering the electroplated microstructure was utilized. The experimental data pertaining to the relationship between the geometric features and the parameters of the removal process are summarized. Based on the established SU-8 removal process, an electroplated nickel comb structure with high-aspect-ratio SU-8 mold was fabricated in a cost-effective manner. In addition, a freestanding micro mechanical structure without a sacrificial layer was successfully realized. The in-plane free movements of the released freestanding structure are demonstrated by electromagnetic actuation. This research implies that various types of MEMS devices can be developed at a low-cost with design flexibility.
Similar content being viewed by others
References
Dai W, Lian K, Wang W (2005) A quantitative study on the adhesion property of cured SU-8 on various metallic surfaces. Microsyst Technol 11:526–534. doi:10.1007/s00542-005-0587-4
Dentinger PM, Clift WM, Goods SH (2002) Removal of SU-8 photoresist for thick film applications. Microelectron Eng 61–62:993–1000. doi:10.1016/S0167-9317(02)00490-2
Haobing L, Chollet F (2006) Layout controlled one-step dry etch and release of MEMS using deep RIE on SOI wafer. J MEMS 15:541–547. doi:10.1109/JMEMS.2006.876660
Hoa CH, China KP, Yangb CR, Wuc HM, Chen SL (2002) SU Ultrathick SU-8 mold formation and removal, and its application to the fabrication of LIGA-like micromotors with embedded roots. Sens Actuators A Phys 102:130–138. doi:10.1016/S0924-4247(02)00297-2
Hong G, Holmes AS, Heaton ME (2003) SU8 resist plasma etching and its optimization. Design, Test, Integration and Packaging of MEMS/MOEMS, pp 268–271
Qu W (1999) 3D UV-microforming: principles and applications. Eng Sci Educ J 8:13–19. doi:10.1049/esej:19990103
Song IH, Ajmera PK (2003) Use of a photoresist sacrificial layer with SU-8 electroplating mould in MEMS fabrication. J Micromech Microeng 13:816–821. doi:10.1088/0960-1317/13/6/304
Ueno H, Hosaka M, Zhang Y, Tabata O, Konishi S and Sugiyama S (1997) Study on fabrication of high aspect ratio microparts using the LIGA process. In: Proceedings of the 1997 international symposium on micromechatronics and human science, pp 49–54
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, J.S., Lee, S.S. Fabrication of a freestanding micro mechanical structure using electroplated thick metal with a HAR SU-8 mold. Microsyst Technol 15, 287–296 (2009). https://doi.org/10.1007/s00542-008-0709-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-008-0709-x