Abstract
The demand for greater storage capacity is prompting the development of data storage tape with greater volumetric and areal density. As the data tracks on these tapes become narrower, minimization of the lateral tape motion (LTM) becomes more important to prevent loss of data due to read/write errors. In order to identify and minimize sources of LTM, a vibration model is developed which simplifies the tape drive to a fixed-fixed Euler-Bernoulli beam model with axial velocity. The effects of varying axial velocity, tension, free span length, and tape thickness were investigated. The calculated natural frequencies are compared to those obtained by both static and dynamic experiments. Effects of varying the length, tape thickness, and tension were studied in the static experiment while the effects of changing speed and tension were studied in the dynamic experiment.
Similar content being viewed by others
References
Anonymous (2004) SAIT tape overview—AIT technology forum. Retrieved November 16, 2005 from http://www.aittape.com/sait-tape.html
Anonymous (2005) LTO: news, toolbox, white paper. Retrieved November 16, 2005 from http://www.lto-technology.com/newsite/html/about_white4.html
Alfano AD, Bhushan B (2006a) New technique for monitoring lateral tape motion using a magnetic signal. Microsyst Technol 12:565–570
Alfano AD, Bhushan B (2006b) Magnetic evaluation of advanced metal evaporated tape in an advanced linear tape drive. J Magn Magn Mater (in press)
Bhushan B (1996) Tribology and mechanics of magnetic storage devices. 2nd edition. Springer, New York
Bhushan B (2000) Mechanics and reliability of flexible magnetic media. 2nd edition. Springer, New York
Bhushan B, Ma T, Higashioji T (2001) Tensile and dynamic properties of improved ultrathin polymeric films. J Appl Poly Sci 83:2225–2244
Boyle Jr JM, Bhushan B (2006) Vibration modeling of magnetic tape with vibro-impact of tape-guide contact. J Sound Vib 289:632–655
Chubachi T (1958) Lateral vibration of axially moving wire or belt form materials. Bull Jpn Soc Mech Eng 1:24–29
Elrod HG, Eshel A (1965) The theory of the infinitely wide, perfectly flexible, self-acting foil bearing. Trans ASME J Basic Eng 87:831–836
Gaith M, Müftü S (2005) Transverse vibration of two axially moving, tensioned beams connected by an elastic foundation. In: Proceedings of vibration and noise control symposium, ASME international mechanical engineering congress and exposition, Orlando, Florida, CD-ROM Proceedings, IMECE 2005–80377, 8–12 November 2005
Goldade A, Bhushan B (2003) Measurement and origin of edge damage in a linear tape drive. Tribol Lett 14:167–180
Hansen WS, Bhushan B (2004) Effects of operating speed and tension and sources of lateral tape motion in a linear tape drive. J Magn Magn Mater 293:826–848
Inman DJ (2001) Engineering vibration. 2nd edition. Prentice Hall, Englewood Cliffs
Mote Jr CD (1965) A study of Band Saw vibrations. J Frankl Inst 279:430–444
Richards DB, Sharrock MP (1998) Key issues in the design of magnetic tapes for linear systems of high track density. IEEE Trans Mag 34:1878–1882
Topoleski JJ, Bhushan B (2000) Qualitative and quantitative evaluation of the quality of factory-slit magnetic tape edges. J Info Storage Proc Syst 2:109–116
Wang JH, Taylor RJ, Talke FE (2003) Lateral motion and edge wear of magnetic tapes. Tribol Inter 36:423–431
Wickert JA, Mote Jr CD (1990) Classical vibration analysis of axially moving continua. Trans ASME J Appl Mech 57:738–744
Acknowledgments
Financial support for this study was provided by the membership of the Nanotribology Laboratory for Information Storage and MEMS/NEMS and Imation Corp.-Advanced Technology Program (Program Manager, Ted Schwarz, Peregrine Recording Technology, St Paul, MN), National Institute of Science and Technology, as part of Cooperative Agreement 70NANB2H3040. The authors thank Richard E. Jewett and Todd L. Ethen, both of Imation Corp., for providing Ultrium dual-layer MP tape. Special thanks to Richard E. Jewett, Todd L. Ethen, and Raul Andruet of Imation Corp., and Dr. Yaxin Song and the other staff members of NLIM for technical support with the tape drive and for helpful discussion throughout the study.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hayes, T.G., Bhushan, B. Vibration analysis of axially moving magnetic tape with comparisons to static and dynamic experimental results. Microsyst Technol 13, 689–699 (2007). https://doi.org/10.1007/s00542-007-0387-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-007-0387-0