Abstract
A skew of a paper transferred by rubber rollers in printers is simulated by FEM software. Effects of an imbalance of preload, an imbalance distribution of coefficient of friction and a front tension on the paper skew are investigated and how to determine the skew direction are shown. A simulation model is composed of a feed roller, a preload roller and a paper. The feed roller is rotated forcibly by a certain degree at every calculation step and a deformation, displacement and strain of the paper and rollers are calculated. A series of calculation results is shown as a motion simulation. The results show that the paper skews to the smaller preload side, to the smaller coefficient of friction side, or to the opposite side of the front tension. Further, effects of a skew prevention guide plate is simulated.
Similar content being viewed by others
References
Fujimura H, Ono K (1996) Analysis of paper motion driven by skew-roll paper feeding system in Japanese. Trans JSME C 62-596:1354–1360
Okamoto N et al (2001) Study on velocity characteristics and mechanics of paper feeding with rubber-covered roller drive in Japanese. Trans JSME C 67-654:475–482
Shima Y et al (1997) Skew control mechanism of flexible media moving through belts in Japanese.Proc JSME 97-22:923–924
Yanabe S (2006) A teaching material on simulation method for handling flexible media and results in Japanese. Japan Techno-Center
Yanabe S et al (2003) FEM simulation of paper feed mechanism with rubber roller, Proceeding of IIP/ISPS Joint MIPE ‘03 pp 311–312
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yanabe, S., Maeda, T. Skew simulation of a paper transferred by rubber rollers in printers. Microsyst Technol 13, 959–964 (2007). https://doi.org/10.1007/s00542-006-0292-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-006-0292-y