Abstract
Deep X-ray lithography masks require good transparency and mechanical resistance to the intense synchrotron X-ray beam, large active areas (cm)2 and compatibility with the standard fabrication processes (optical lithography and gold electroforming). Moreover higher resolution can be achieved with low roughness flat membrane. Furthermore multiple aligned exposures require an optically transparent material. Diamond like Carbon membranes fulfill those requirements but have a prohibitive cost. Our approach consists in using an SU-8 epoxy resin layer as membrane material. In this communication the different steps of the fabrication process will be presented, as well as the results obtained using the mask for particular applications.
Similar content being viewed by others
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cabrini, S., Pérennès, F., Marmiroli, B. et al. Low cost transparent SU-8 membrane mask for deep X-ray lithography. Microsyst Technol 11, 370–373 (2005). https://doi.org/10.1007/s00542-004-0473-5
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s00542-004-0473-5