Skip to main content
Log in

Percutaneous electrode placement for spinal cord stimulation in a patient with spinal fusion: a technical report

  • Clinical Report
  • Published:
Journal of Anesthesia Aims and scope Submit manuscript

Abstract

A spinal cord stimulation (SCS) trial was attempted to alleviate left knee pain in a patient with spinal fusion from T12 to L4. Good paresthesia coverage for the knee pain was attained with SCS. However, while removing the needle used for electrode placement, the needle became fixed in the bony supplementary tissue. Moreover, while attempting to remove the needle using Kelly forceps, the hub of the needle became blocked. Without the hub, we had no choice but to use a pneumatic drill for removing the needle. Accordingly, the supplementary bone tissue was drilled under real-time imaging, using a pneumatic drill with a 3.2-mm drill bit, and another epidural needle was inserted through the hole. We consider that, in patients with spinal fusion, making a borehole with a pneumatic drill for introducing the epidural needle for percutaneous SCS electrode placement may be advisable in order to avoid the above-mentioned difficulties.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1

Similar content being viewed by others

References

  1. Frey ME, Manchikanti L, Benyamin RM, Schultz DM, Smith HS, Cohen SP. Spinal cord stimulation for patients with failed back surgery syndrome: a systematic review. Pain Phys. 2009;12:379–97.

    Google Scholar 

  2. Mironer YE. Neurostimulation techniques. In: Tollison CD, Satterthwaite JR, Tollison JW, editors. Practical pain management. 3rd ed. Philadelphia: Lippincott Williams & Wilkins; 2002. p. 160.

  3. Stojanovic MP, Abdi S. Spinal cord stimulation. Pain Phys. 2002;5:156–66.

    Google Scholar 

  4. Schofferman J, Reynolds J, Herzog R, Covington E, Dreyfuss P, O’Neill C. Failed back surgery: etiology and diagnostic evaluation. Spine J. 2003;3:400–3.

    Article  PubMed  Google Scholar 

  5. Karmani S, Lam F. The design and function of surgical drills and K-wires. Curr Orthop. 2004;18:484–90.

    Article  Google Scholar 

  6. Fincham BM, Jaeblon T. The effect of drill bit, pin, and wire tip design on drilling. J Am Acad Orthop Surg. 2011;19:574–9.

    PubMed  Google Scholar 

  7. Van Buyten JP. Neurostimulation for chronic neuropathic back pain in failed back surgery syndrome. J Pain Symptom Manage. 2006;31:S25–9.

    Article  PubMed  Google Scholar 

  8. Cameron T. Safety and efficacy of spinal cord stimulation for the treatment of chronic pain: a 20-year literature review. J Neurosurg. 2004;100:254–67.

    Article  PubMed  Google Scholar 

Download references

Conflict of interest

This work entails no conflict of interest.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Kyung-Hoon Kim.

About this article

Cite this article

Park, SC., Kim, KH. Percutaneous electrode placement for spinal cord stimulation in a patient with spinal fusion: a technical report. J Anesth 26, 286–288 (2012). https://doi.org/10.1007/s00540-011-1311-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00540-011-1311-4

Keywords

Navigation