Skip to main content
Log in

Neural networks and fuzzy logic approaches to predict mechanical properties of XLPE insulation cables under thermal aging

  • Original Article
  • Published:
Neural Computing and Applications Aims and scope Submit manuscript

Abstract

The widespread use of cross-linked polyethylene (XLPE) as insulation in the manufacturing of medium- and high-voltage cables may be attributed to its outstanding mechanical and electrical properties. However, it is well known that degradation under service conditions is the major problem in the use of XLPE as cable insulation. Laboratory investigations of the insulations aging are time-consuming and cost-effective. To avoid such costs, we have developed two models which are based on artificial neural networks (ANNs) and fuzzy logic (FL) to predict the insulation properties under thermal aging. The proposed ANN is a supervised one based on radial basis function Gaussian and trained by random optimization method algorithm. The FL model is based on the use of fuzzy inference system. Both models are used to predict the mechanical properties of thermally aged XLPE. The obtained results are evaluated and compared to the experimental data in depth by using many statistical parameters. It is concluded that both models give practically the same prediction quality. In particular, they have ability to reproduce the nonlinear behavior of the insulation properties under thermal aging within acceptable error. Furthermore, our ANN and FL models can be used in the generalization phase where the prediction of the future state (not reached experimentally) of the insulation is made possible. Additionally, costs and time could be reduced.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16

Similar content being viewed by others

References

  1. Ilie S, Setnescu R, Lungulescu EM, Marinescu V, Ilie D, Setnescu T, Mares G (2011) Investigations of a mechanically failed cable insulation used in indoor conditions. Polym Test 30:173–182

    Article  Google Scholar 

  2. http://www.nationalgrid.com/NR/rdonlyres/C9AF5612-DF25-4FCF-ABB5-69F237ACB0C5/3411/SPTTS25.pdf. Accessed 11 May 2014

  3. Yamanaka T, Maruyama S, Tanaka T (2003) The development of DC ± 500 kV XLPE cable in consideration of the space charge accumulation. In: IEEE 7th international conference on properties and applications of dielectric materials (ICPADM), Nagoya, Japan, pp 689–694

  4. Dissado LA, Fothergill JH (1992) Electrical degradation and breakdown in polymers. Peter Peregrinus Ltd, London

    Book  Google Scholar 

  5. Plopeanu M, Notingher PV, Stancu C, Grigorescu S (2011) Electrical ageing of polyethylene power cables insulation subjected to an electric field in the presence of water. In: 7th international symposium on advanced topics in electrical engineering, Bucharest, pp 1–4

  6. Reich L, Stivala SA (1971) Elements of polymer degradation. McGraw-Hill, New York

    Google Scholar 

  7. Struik LCE (1978) Physical aging in amorphous polymers and other materials. Elsevier Press, Amsterdam

    Google Scholar 

  8. Boukezzi L, Boubakeur A, Laurent C, Lallouani M (2007) DSC study of artificial thermal aging of XLPE insulation cables. In: 9th IEEE international conference on solid dielectrics (ICSD), pp 146–149, Winchester, UK, July 8–13 2007

  9. Mecheri Y, Boukezzi L, Boubakeur A, Lallouani M (2000) Dielectric and mechanical behaviour of cross-linked polyethylene under thermal aging. In IEEE annual report, conference on electrical insulation dielectric phenomena (CEIDP), pp 560–563

  10. Boukezzi L, Nedjar M, Mokhnache L, Lallouani M, Boubakeur A (2006) Thermal aging of cross-linked polyethylene. Ann Chimie Sci Matériaux 31(5):561–569

    Article  Google Scholar 

  11. Xu Y, Luo P, Xu M, Sun T (2014) Investigation on insulation material morphological structure of 110 and 220 kV XLPE retired cables for reusing. IEEE Trans Dielectr Electr Insul 21(4):1687–1696

    Article  Google Scholar 

  12. Xie A, Zheng X, Li S, Chen G (2009) The conduction characteristics of electrical trees in XLPE cable insulation. J Appl Polym Sci 114:3325–3330

    Article  Google Scholar 

  13. Bao M, Yin X, He J (2011) Analysis of electrical tree propagation in XLPE power cable insulation. Phys B 406(8):1556–1560

    Article  Google Scholar 

  14. Li J, Zhao X, Yin G, Li S (2011) The effect of accelerated water tree ageing on the properties of XLPE cable insulation. IEEE Trans Dielectr Electr Insul 18(5):1562–1569

    Article  Google Scholar 

  15. Abderrazzaq MH (2012) The impact of electrical treeing on a cable-embedded fibre. Electr Power Syst Res 86:28–33

    Article  Google Scholar 

  16. Choo W, Chen G, Swingler SG (2011) Electric field in polymeric cable due to space charge accumulation under DC and temperature gradient. IEEE Trans Dielectr Electr Insul 18(2):596–606

    Article  Google Scholar 

  17. Hussin N, Chen G (2012) Analysis of space charge formation in LDPE in the presence of crosslinking byproducts. IEEE Trans Dielectr Electr Insul 19(1):126–133

    Article  Google Scholar 

  18. Gulmine JV, Janissek PR, Heise HM, Akcelrud L (2003) Degradation profile of polyethylene after artificial accelerated weathering. Polym Degrad Stab 79:385–397

    Article  Google Scholar 

  19. Tavares AC, Gulmine JV, Lepienski CM, Akcelrud L (2003) The effect of accelerated aging on the surface mechanical properties of polyethylene. Polym Degrad Stab 81:367–373

    Article  Google Scholar 

  20. Fothergill JC, Dodd SJ, Dissado LA (2011) The measurement of very low conductivity and dielectric loss in XLPE cables: a possible method to detect degradation due to thermal aging. IEEE Trans Dielectr Electr Insul 18(5):1545–1553

    Article  Google Scholar 

  21. Diego JA, Belana J, Orrit J, Cañadas JC, Mudarra M (2011) Annealing effect on the conductivity of XLPE insulation in power cable. IEEE Trans Dielectr Electr Insul 18(5):1555–1561

    Article  Google Scholar 

  22. Sadrmomtazi A, Sobhani J, Mirgozar MA (2013) Modeling compressive strength of EPS lightweight concrete using regression, neural network and ANFIS. Constr Build Mater 42:205–216

    Article  Google Scholar 

  23. Özger M (2011) Prediction of ocean wave energy from meteorological variables by fuzzy logic modelling. Expert Syst Appl 38:6269–6274

    Article  Google Scholar 

  24. Benli H (2013) Determination of thermal performance calculation of two different types solar air collectors with the use of artificial neural networks. Int J Heat Mass Transf 60:1–7

    Article  Google Scholar 

  25. Kuşan H, Aytekin O, Özdemir I (2010) The use of fuzzy logic in predicting house selling price. Expert Syst Appl 37:1808–1813

    Article  Google Scholar 

  26. Chen HC, Gu FC, Wang MH (2012) A novel extension neural network based partial discharge pattern recognition method for high-voltage power apparatus. Expert Syst Appl 39:3423–3431

    Article  Google Scholar 

  27. Mohanty S, Ghosh S (2014) Breakdown voltage of solid insulations: its modeling using soft computing techniques and its microscopic study. Electr Power Energy Syst 62:825–835

    Article  Google Scholar 

  28. Teguar M, Mekhaldi A, Boubakeur A (2012) Prediction of polluted insulators characteristics using artificial neural networks. In: IEEE, annual report conference on electrical insulation and dielectric phenomena (CEIDP), pp 767–770

  29. Gençoğlu MT, Cebeci M (2009) Investigation of pollution flashover on high voltage insulators using artificial neural network. Expert Syst Appl 36:7338–7345

    Article  Google Scholar 

  30. El-Hag AH, Jahromi AN, Pasand MS (2008) Prediction of leakage current of non-ceramic insulators in early aging period. Electr Power Syst Res 78:1686–1692

    Article  Google Scholar 

  31. Bourek Y, Mokhnache L, Nait Said N, Kattan R (2011) Determination of ionization conditions characterizing the breakdown threshold of a point-plane air interval using fuzzy logic. Electr Power Syst Res 81:2038–2047

    Article  Google Scholar 

  32. Asimakopoulou GE, Kontargyri VT, Tsekoura GJ, Elias ChN, Asimakopoulou FE, Stathopulos IA (2011) A fuzzy logic optimization methodology for the estimation of the critical flashover voltage on insulators. Electr Power Syst Res 81:580–588

    Article  Google Scholar 

  33. Bessissa L, Boukezzi L, Mahi D (2014) A fuzzy logic approach to model and predict HV cable insulation behaviour under thermal aging. Acta Polytech Hung 11(3):107–123

    Google Scholar 

  34. Boukezzi L, Boubakeur A (2013) Prediction of mechanical properties of XLPE cable insulation under thermal aging: neural network approach. IEEE Trans Dielectr Electr Insul 20(6):2125–2134

    Article  Google Scholar 

  35. Mohanty S, Ghosh S (2010) Modeling of breakdown voltage of White Minilex Paper in the presence of voids under ac and dc conditions using fuzzy logic techniques. Elect Power Energy Syst 32:518–523

    Article  Google Scholar 

  36. Khemaissia S, Morris MS (1994) Review of networks and choice of radial basis function networks for system identification. Technol Adv 6:55–85

    Google Scholar 

  37. Boukezzi L, Boubakeur A (2012) Comparison of some neural network algorithms used in prediction of XLPE HV insulation properties under thermal aging. In: IEEE international conference on condition monitoring and diagnosis, pp 1218–1222, Bali, Indonesia, 23–27 Sept 2012

  38. Zadeh LA (1965) Fuzzy sets. Inform Contr 8:338–353

    Article  Google Scholar 

  39. May JF, Vallet G (1972) Contribution to study the electrical properties of certain types of polymers in solid state (in French). RGE 81(4):255–262

    Google Scholar 

  40. Boubakeur A, Mecheri Y, Boumerzoug M (2000) Dielectric and mechanical behaviour of cross-linked polyethylene subjected to continuous thermal aging (in French). Ann Chimie Sci Matériaux 25:457–470

    Article  Google Scholar 

  41. Celina M, Gillen KT, Clough RL (1998) Inverse temperature and annealing phenomena during degradation of crosslinked polyolefins. Polym Degrad Stab 61:231–244

    Article  Google Scholar 

  42. Andjelkovic D, Rajakovic N (2001) Influence of accelerated aging on mechanical and structural properties of cross-linked polyethylene (XLPE) insulation. IEEE Electr Eng 83:83–87

    Article  Google Scholar 

  43. Soltan B (1996) Crosslinking of polyolefine. The polymeric materials encyclopedia. CRC Press Inc., Boca Raton

    Google Scholar 

  44. Willmot CJ (1981) On the validation of models. Phys Geogr 2:184–194

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to L. Boukezzi.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Boukezzi, L., Bessissa, L., Boubakeur, A. et al. Neural networks and fuzzy logic approaches to predict mechanical properties of XLPE insulation cables under thermal aging. Neural Comput & Applic 28, 3557–3570 (2017). https://doi.org/10.1007/s00521-016-2259-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00521-016-2259-y

Keywords

Navigation