Zusammenfassung
Komponenten im elektrischen Antriebsstrang von Kraftfahrzeugen müssen strenge Normen bezüglich der abgestrahlten Magnetfeldemissionen erfüllen. Hochvoltkabel spielen eine wichtige Rolle bei der Verteilung von beabsichtigten funktionalen und unbeabsichtigten parasitären Strömen. Diese Ströme führen zu gestrahlten Magnetfeldemissionen, die durch geometrische Konfigurationen beeinflusst werden.
Die Übertragungsfunktionen werden vorgestellt, um die Auswirkung der geometrischen Konfiguration der Stromschleifen auf die resultierenden Magnetfelder zu quantifizieren. Darüber hinaus werden sie auf der Grundlage der Verteilung von funktionalen und parasitären Strömen in geometrische Teilbereiche zerlegt.
Abstract
Components in the electric drive train of motor vehicles must meet strict standards with regard to radiated magnetic field emissions. High-voltage cables play an important role in the distribution of intended functional and unintended parasitic currents. These currents result in radiated magnetic field emissions that are influenced by geometric configurations.
The transfer functions are presented to quantify the effect of the geometric configurations of the current loops on the resulting magnetic fields. Furthermore, they are decomposed into geometric subareas based on the distribution of functional and parasitic currents.
Literatur
Ö. V. für Elektronik (2015): Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and mehods of measurement for the protection of on-board receivers, ÖVE/Austrian Standards Institute. 2015 Apr. 2015, CISPR 25.
G. N. S. of the People’s Republic of China (2008): Limits and test method of magnetic and electric field strength from electric vehicles, broadband, 9 kHz to 30 MHz AQSIQ And SAC, Sep. 2008, GB/T 18387-200
Electric and hybrid electric road vehicles-radio disturbance characteristics – Limits and methods of measurement for the protection of off-board receivers below 30 MHz, CISPR 36 ED1. International Electrotechnical Commission, IEC., Aug. 2019, CIS/D/462/CDV.
Kempski, A., Smoleński, R. (2006): Decomposition of emi noise into common and differential modes in pwm inverter drive system. Electr. Power Quality Utilis., 12(1), 53–58.
Bäuerle, T. (2015): Magnetfeldemissionsbetrachtung bei KFZ-Elektroantrieben. Stuttgart, Germany: Universität Stuttgart and Robert Bosch GmbH. Forschungsarbeit.
Murthy, M. S., Bäuerle, T., Rasek, G. A., Schwarz, H. (2018): Evaluation of magnetic field emissions in automotive electrical drives. In 2018 international symposium on electromagnetic compatibility (EMC Europe) (S. 654–659).
Di Piazza, M. C., Ragusa, A., Tine, G., Vitale, G. (2004): A model of electromagnetic radiated emissions for dual voltage automotive electrical systems. In 2004 IEEE international symposium on industrial electronics (Vol. 1, S. 317–322). New York: IEEE.
Weber, E. (1950): Electromagnetic fields. Theory and applications. Vol. I: mapping of fields. New York and London: Wiley.
Kempski, A., Smolenski, R., Strzelecki, R. (2002): Common mode current paths and their modeling in pwm inverter-fed drives. In 2002 IEEE 33rd annual Vol. 3 Power Electronics Specialists Conference pesc, 2002. 02, 2002 (S. 1551–1556). New York: IEEE. .
Author information
Authors and Affiliations
Corresponding author
Additional information
Hinweis des Verlags
Der Verlag bleibt in Hinblick auf geografische Zuordnungen und Gebietsbezeichnungen in veröffentlichten Karten und Institutsadressen neutral.
Rights and permissions
About this article
Cite this article
Dhara, M., Rasek, G.A. Übertragungsfunktionen zur Abschätzung der gestrahlten Emissionen von HV-Kraftfahrzeugkabeln. Elektrotech. Inftech. 138, 15–19 (2021). https://doi.org/10.1007/s00502-020-00858-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00502-020-00858-x