Summary
Data-intensive applications based on NFC (Near Field Communication) or applications for healthcare/e-government will need an increase of the actual defined and standardized transmission rates of 848 kbit/s. It is topic of this work to point out physical layer parameters, limitations and concepts, allowing to enhance the transmission rate of passive 13.56 MHz RFID systems. Additionally, ongoing standardization activities at ISO 14443 are pointed out, having the aim to standardize significantly enhanced datarates. Finally, an implementation of a lab-scaled prototype with a transmission rate of 6.78 Mbit/s is demonstrated and discussed.
Zusammenfassung
Datenintensive Anwendungen wie NFC (Nahfeld-Kommunikation) oder Applikationen im Gesundheitsbereich und im Bereich des E-Government erfordern es, die aktuell standardisierte Datenrate von 848 kbit/s zu erhöhen und zu erweitern. Es ist Gegenstand der aktuellen Untersuchungen, physikalische Parameter, Limitierungen und mögliche Konzepte aufzuzeigen, die es erlauben, die aktuellen gültigen Datenraten von 13,56 MHz bei RFID-Systemen zu erhöhen. Im Speziellen werden aktuelle Standardisierungsaktivitäten in Richtung höherer Datenraten im Rahmen von ISO 14443 diskutiert. Abschließend wird ein diskreter Prototyp vorgestellt, der eine Übertragungsrate von 6,7 Mbit/s erreicht.
Similar content being viewed by others
References
Cole, P., Jamali, B., Ranasinghe, D. (2003): Coupling relations in RFID systems. White Paper. Auto-ID Centre University of Adelaide.
ERC, REC 70-03 (2005): Recommendation adopted by the Frequency Management. Regulatory Affairs and Spectrum Engineering Working Groups, November 2005.
Finkenzeller, K. (2002): RFID-Handbuch. 3. Aufl.: München, Wien: Carl Hanser.
International Organization for Standardization/International Electrontechnical Commision – ISO/IEC (1999): FCD, 14443-2.
International Organization for Standardization/International Electrontechnical Commision – ISO/IEC (2006): Identification cards – test methods. WD, 10373-6.
Maier, A. (2007): Entwurf & Analyse von Transceiverstrukturen in hochratigen RFID-Systemen. Diplomarbeit, Fachhochschule Technikum Kärnten.
Patauner, C. (2007): Systemanalyse und Realisierung eines hochratigen 13 MHz RFID-Systems für den Uplink. Diplomarbeit, Institut für Breitbandkommunikation der TU Graz.
Sampl, M. (2007): Simulation and Evaluation of Coding and Equalization for 13.56 MHz RFID Systems. Diploma Thesis, Institute of Broadband Communications, Graz, University of Technology.
Standard ECMA 352, 1st ed. Near Field Communication Interface and Protocol-2 (NFCIP-2), Dec. 2003.
Steber, J. M. (1984): PSK Demodulation (Part 1). Vol. 11, No. 2, Watkins-Lohnson Company: USA.
Witschnig, H., Merlin, E., Gebhart, M. (2005): RFID-Prnciples. Challenges and Expetations. EEEfCOM Workshop, ULM, Germany, June 2005, ISBN: 3-86611-047-2.
Yates, D. C., Holmes, A. S., Burdett, A. J. (2004): Optimal transmission frequency for ultralow-power short-range radio links. IEEE Transactions on Circuits and Systems-vol. 51, No. 7, July 2004: 1004–1013.
Zebra Technologies Corporation: RFID Technology Smart Labels Application. White Paper.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Witschnig, H., Patauner, C., Maier, A. et al. High speed RFID lab-scaled prototype at the frequency of 13.56 MHz. Elektrotech. Inftech. 124, 376–383 (2007). https://doi.org/10.1007/s00502-007-0485-9
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s00502-007-0485-9