Abstract
The flat steel feed stock for the final fabrication of steel products is mainly covered by cold rolled and final annealed or galvanized strips. Depending on the thickness and surface demands, also conventional hot-rolled batch processes can serve a certain but truly very limited ratio. The Arvedi ESP Technology is giving new impulses to this market. With this game changing technology, it is suddenly possible to serve feed stock for numerous applications which cannot be directly produced by hot rolling until now. Thinner and at the same time wider steel strips can be produced and replace a high number of cold rolled steel strips. Joint development efforts by Rizhao Steel and Primetals at recently started up ESP lines are setting new standards to cover also even more critical products for higher applications. The paper gives an overview of results and products developed for direct applications.
Zusammenfassung
Die Ausgangsmaterialien für flache Endprodukte werden meist über Kaltwalzen, Glühen und Galvanisierung der Bänder erzeugt. In Abhängigkeit von der Blechdicke und der Oberflächenanforderungen können auch konventionell warmgewalzte Bänder optional verwendet werden. Die Arvedi ESP Technologie setzt dazu neue Impulse, wodurch Bänder zur Verfügung stehen, die bislang nicht direkt in Warmwalzwerken hergestellt werden konnten. Dünne und gleichzeitig breitere Bänder können damit produziert werden und ersetzen damit größere Mengen an Kaltbändern. In einer Zusammenarbeit mit Rizhao Steel und Primetals konnten auch für kritische Produkte verbesserte Standards erzielt werden. In dieser Arbeit werden die Ergebnisse und Produkte der Dünnbandanwendungen übersichtlich dargestellt.
Similar content being viewed by others
References
DIN EN 10111, Kontinuierlich warmgewalztes Band und Blech aus weichen Stählen zum Kaltumformen—Technische Lieferbedingungen, EN 10111:2008
DIN EN 10025, Warmgewalzte Erzeugnisse aus Baustählen—Teil 2: Technische Lieferbedingungen für unlegierte Baustähle, EN 10025-2: 2004 11
DIN EN 10163-2, Lieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Stahlerzeugnissen (Blech, Breitflachstahl und Profile)—Teil 2: Blech und Breitflachstahl,EN 10163-2: 2004 12
Primetals Technologies, Internal market investigation and study on cold rolling market requirements, 2015
Lengauer, T.; Watzinger, I.; Linzer, B.; Watzinger, J.: ARVEDI ESP’S UNIQUE ULTRA-THIN-STRIP PRODUCTION, Conference Proceedings of: 10th International Rolling Conference and the 7th European Rolling Conference – ROLLING 2016, 6. June 2016 – 9. June 2016
Jungbauer, A.; Wersching, G.; Viehböck, A.; Linzer, B. Watzinger, J.: The new world of hot strip rolling. Achievements at Rizhao Steels new ESP complex setting new standards, Rolling 2016 Conference, Graz
Steels-Microstructure and properties, Bhadeshia and Honeycombe, 2006
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Linzer, B., Lengauer, T., Grosseiber, S. et al. Broadening the Steel Markets by Direct Application of High Quality ESP Strips. Berg Huettenmaenn Monatsh 163, 96–101 (2018). https://doi.org/10.1007/s00501-018-0717-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00501-018-0717-9
Keywords
- ESP
- Endless hot rolling
- Cold strip substitute
- Steel grades ESP
- ESP material for direct applications
- ESP product examples