Zusammenfassung
Komplexe Reststoffe wie Filterstäube, Schlämme und spezielle Schlacken stellen heute einen interessanten Rohstoff für die Herstellung zahlreicher Metalle dar. Umwelttechnische Aspekte als auch steigende Metalpreise bewegen die Industrie diese Rückstände immer stärker als sekundäre Rohstoffquelle zu betrachten. Allerdings bilden die häufig komplexe Struktur dieser Materialien und eine Vielzahl enthaltener problematischer Verunreinigungen eine große Herausforderung für die Industrie sowie die Forschung und Entwicklung in diesem Feld. Im Januar 2011 startete das Christian Doppler Labor für Optimierung und Biomasseeinsatz beim Recycling von Schwermetallen gemeinsam mit den Partnerfirmen voestalpine, RHI, Befesa and Aurubis seine Aktivitäten mit dem Hauptziel der Erforschung von unterschiedliche Methoden zur Charakterisierung komplexer Reststoffe, der simultanen Rückgewinnung von Wertmetallen, dem Ersatz fossiler Reduktionsmittel durch pyrolysierte Biomasse sowie der Erhöhung der Produktqualität, um möglichst wirtschaftliche und umweltgerechte Recyclingprozesse zu realisieren. Die Arbeit beschreibt die Ergebnisse und Erfolge der Forschungstätigkeit nach dem ersten Jahr und gibt einen Ausblick auf zukünftige Aktivitäten.
Summary
Complex residues such as filter dusts, sludges and special slags are nowadays an important raw material for the production of various metals. Environmental considerations as well as rising metal prices force the recycling industry to accept such residues more and more as an important secondary resource. Though the complex structure and different problematic impurities of these materials form a challenge for the industry and the research and development in this area. In January 2011 the Christian Doppler Laboratory (CDL) for Optimization and Biomass Utilization in Heavy Metal Recycling started its operation with the companies voestalpine, RHI, Befesa and Aurubis as partners. Its aim is to investigate various methods of characterizing complex residues, recover simultaneously valuable metals, replace fossil reducing agents by pyrolyzed biomass and increase the product quality to enable a most economical an decological recycling process. The paper describes the scientific achievements of the CDL after one year in operation as well as future aims in research and development.
References
Antrekowitsch, J., T. Griessacher, D. Offenthaler, H. Schnideritsch: Charakterisierung und Verhalten von Zink-, Blei- und Halogenverbindungen beim Recycling von Elektrolichtbogenofenstäuben, BHM, 153. Jg., Heft 5, Wien, Österreich: Springer-Verlag, S. 182–188, 2008
Guezennec, J., et. al.: Dust formation in electric arc furnace: birth of the particles, Powder Technology, pp. 2–11, 2005
Schnideritsch, H., et. al.; Characterisation, melting and reductionbehavior of heavy metal containing residues, Proc. of EMC, Vol 3, pp. 1155–1166, 2009
Steinlechner, S.: Technische Eignung und wirtschaftliche Betrachtung der Aufarbeitung komplexer Sekundärrohstoffe, Diplomarbeit, Montanuniversität Leoben, 2009
Gouzhu, Y.: Characterization and Removal of Halogens in the EAF Dust and Zinc Oxide Fume obtained from Thermal Treatment of EAF Dust, Proc.: Fourth International Symposium on Recycling of Metals and Engineered Materials, Pittsburgh, pp. 271–280, 2000
Ye, G., J. White, L.-Y. Wei: Association of Halogens in Electric Arc Furnace Dust and Zinc Oxide Fume before and after Leaching. Proc., REWAS 99: Global Symposium on Recycling, Waste Treatment and Clean Technology, San Sebastian, pp. 1503–1510, 1999
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Antrekowitsch, J. Christian Doppler Laboratory for Optimization and Biomass Utilization in Heavy Metal Recycling – Achievements after the First Year Operation. Berg Huettenmaenn Monatsh 157, 38–43 (2012). https://doi.org/10.1007/s00501-011-0048-6
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s00501-011-0048-6