Summary
Current research at the Institute of Nonferrous Metallurgy, University of Leoben, with the main focus aluminium technology, covers a wide scope of topics, ranging from field production and product optimisation to issues concerning secondary metallurgy as well as residual material reconditioning. In collaboration with research and industry partners from different branches, issues of castability and workability, heat treatment, machining, high temperature strength and mechanical properties in general, corrosion and anodisation behaviour are the centre of interest. Fundamental investigations within physical metallurgy, for example regarding the effects of alloying or impurity elements, play a decisive role in order to achieve well-balanced product performance. In the last decades, environmental topics such as recycling, emissions reduction and avoidance, saving resources and the restriction of hazardous substances (e. g. lead, chromate) have attained increasing relevance. Thus, the development and characterisation of lead-free aluminium alloys, economic and ecological recycling and the reprocessing of residual wastes from the aluminium industry (e. g. salt slags, filter dusts, dross, skimmings), as well as the re-utilisation of waste material from reprocessing, are the subject of current investigations.
Zusammenfassung
Die aktuelle Forschung am Lehrstuhl für Nichteisenmetallurgie, Montanuniversität Leoben, umfasst im Schwerpunkt Aluminiumtechnologie ein breites Themenfeld, das von der Produktions- und Produktoptimierung bis hin zu Fragenstellungen der Sekundärmetallurgie sowie der Reststoffaufarbeitung reicht. In Zusammenarbeit mit Forschungs- und Industriepartnern aus verschiedenen Branchen stehen Problemstellungen zur Gieß- und Umformbarkeit, Wärmebehandlung, spanabhebenden Bearbeitung, Warmfestigkeit sowie allgemein zu den mechanischen Eigenschaften und zum Korrosionsverhalten im Mittelpunkt. Um eine geeignete Produktqualität zu erhalten, spielen grundlegende metallkundliche Untersuchungen, zum Beispiel hinsichtlich des Einflusses von Legierungs- oder Verunreinigungselementen, eine zentrale Rolle. Zunehmende Relevanz verzeichnen in den letzten Jahrzehnten Umweltthemen wie Recycling, Emissionenverringerung und -vermeidung, Ressourcenschonung oder Unterbindung von Substanzen mit einem hohen Gefährdungspotenzial (z. B. Blei oder sechswertiges Chrom). So sind die Entwicklung und Charakterisierung von bleifreien Aluminiumlegierungen, die ökonomische als auch ökologische Verwertung und Aufarbeitung von Reststoffen der Aluminiumindustrie, wie z. B. Salzschlacken, Filterstäuben oder Krätzen, und die Weiterverwendung von Reststoffen aus den einzelnen Aufbereitungsverfahren Gegenstand laufender Untersuchungen.
Similar content being viewed by others
Literaturverweise
Antrekowitsch, H., M. Complojer, S. Koch, P. Paschen, K. Gamweger and A. Kraly: Porous plugs for gas purging in the aluminium industry. Proc. of Aluminium 2006: International Symposium on Aluminium, Conference of Metallurgists COM, Montreal, Canada (2006), 735–746
Antrekowitsch, H., M. Complojer, K. Gamweger and A. Kraly: Process optimisation and quality improvement by gas-purging in the Al-industry. Proc. of the 2nd International Light Metals Technology Conference, St. Wolfgang, Österreich (2005), 97–101
Ebner, P., H. Antrekowitsch, K. Gamweger and K. Campabadal: Gas treatment as a refining process for aluminuim recycling. Proc. of Global Symposium on Recycling, Waste Treatment and Clean Technology I, Madrid, Spanien (2004), 903–911
Prietl, T., H. Antrekowitsch, I. Filzwieser und K. Gamweger: Spülgasbehandlung in der Kupfer- und Aluminium-Sekundärmetallurgie. Proc. of Depotech, Leoben, Österreich (2004), 721–724
Antrekowitsch, H.: Gas treatment in the secondary metallurgy of nonferrous metals. Proc. of EMC, Hannover, Deutschland (2003), 751–764
Prillhofer, B., und G. Lukesch: Schmelzebehandlung von Aluminiumlegierungen im Rinneninduktions-Gießofen. BHM, 153 (2008), 3, 97–102
Prillhofer, B., H. Böttcher und H. Antrekowitsch: Weiterentwicklungen zur Evaluierung der Schmelzequalität von Aluminiumlegierungen, basierend auf dem Prefil-Verfahren. BHM, 154 (2009), 7, 314–319
Prillhofer, B., H. Antrekowitsch and H. Böttcher: Optimisation of the melt quality in casting holding furnaces. Proc. Light Metals TMS, New Orleans, USA (2008), 627–632
Prillhofer, B., H. Antrekowitsch, H. Böttcher and P. Enright: Nonmetallic inclusions in the secondary aluminium industry for the production of aerospace alloys. Proc. Light Metals TMS, New Orleans, USA (2008), 603–608
Prillhofer, B., H. Böttcher and H. Antrekowitsch: Mögliche Einschlussbildung bei der Herstellung von Walzbarren der Legierung. EN AW-7075. Aluminium, 6 (2008), 78–84
Prillhofer, B., und H. Antrekowitsch: Abscheidung von nichtmetallischen Einschlüssen bei der Raffination von Aluminiumlegierungen. BHM 152 (2007), 3, 53–61
Prillhofer, B., H. Böttcher und H. Antrekowitsch: Improving melt quality in casting furnaces by a gas purging treatment. Proc. of the 11th International Conference on Aluminium Alloys ICAA (2008), Aachen, Germany
Prillhofer, B., H. Böttcher and H. Antrekowitsch: Development and practical performance characteristics of a new impeller for metal treatment in casting/holding furnaces. Light Metals (2009), 749–754
Prillhofer, B., H. Böttcher and H. Antrekowitsch: A new methodology for performance evalution of melt refinement processes in the aluminium industry. Light Metals (2009), 689–694
Prillhofer, B. and H. Böttcher: Mechanisms of Inclusion Formation in EN AW-7075 Melts. Proc. of European Metallurgical Conference EMC, Düsseldorf, Deutschland (2009), 1351–1366
Prillhofer, B.: Verbesserung der Stranggussqualität von hochlegierten Al-Walzbarren. Dissertation, Montanuniversität Leoben, 2009
Koch, S., H. Antrekowitsch, G. Anger and J. Enser: Investigation of the correlation between homogenisation and tensile properties of AlMgSi-Alloys. Proc. of Aluminium 2006: International Symposium on Aluminium, Conference of Metallurgists COM, Montreal, Canada (2006), 839–850
Koch, S. and H. Antrekowitsch: Study of the precipitation kinetics in AlMgZn alloys by using DSC. Proc. of European Metallurgical Conference EMC 4, Düsseldorf, Deutschland (2007), 1947–1956
Pogatscher, S. et al.: Mechanisms controlling the artificial aging of Al-Mg-Si alloys. Acta Materialia, 59 (2011), 3352–3363
Koch, S. and H. Antrekowitsch: Alloying behaviour of Cu, Mg and Mn in lead-free Al-Cu based alloys intended for free machining. BHM 156 (2011) 1, 22–27
Koch, S., M. Wießner and H. Antrekowitsch: Effect of Ti or Zr additions on material characteristics of new lead-free Al-Cu-Mg-Sn alloys for machining purposes. Proc. of European Metallurgical Conference EMC (2011), Düsseldorf, Deutschland (in press)
Koch, S. and H. Antrekowitsch: Investigations of lead-free aluminium alloys for machining. World of Metallurgy – Erzmetall 64 (2011) 1, 26–30
Koch, S. and H. Antrekowitsch: Effects of varied Sn and Cu content in lead-free Al-Cu based alloys intended for free machining. Proc. of Conference of Metallurgists COM, Vancouver, Canada (2010), 289–298
Koch, S. and H. Antrekowitsch: Free-cutting aluminium alloys with tin as substitution for lead. BHM 153 (2008) 7, 278–281
Koch, S.: Aluminum alloys for wire harnesses in automotive engineering. BHM 152 (2007) 3, 62–67
Koch, S.: Untersuchungen von bleifreien Aluminium-Automatenlegierungen. Dissertation, Montanuniversität Leoben, 2010
Pucher, P., H. Antrekowitsch, H. Böttcher, H. Kaufmann und P. Uggowitzer: Einfluss der Legierungszusammensetzung auf die mechanischen Eigenschaften der Sekundärlegierung A226 (AlSi9Cu3) im wärmebehandelten T6-Zustand. Gießereipraxis (2009) 11, 354–358
Pucher, P., H. Böttcher, H. Kaufmann, H. Antrekowitsch and P. Uggowitzer: Effect of compositional variations on the mechanical and fluidity performance of the aluminum cast alloy AlSi9Cu3. Proc. of 1st World PhD Foundry Conference (2009), Brünn, Tschechien
Pucher, P., H. Böttcher, H. Kaufmann, H. Antrekowitsch und P. Uggowitzer: Einfluss der Legierungszusammensetzung auf die mechanischen Eigenschaften und das Fließvermögen der Sekundärlegierung A226 (AlSi9Cu3). Gießereipraxis (2009), 3, 71–78
Pucher, P., H. Antrekowitsch, H. Böttcher, H. Kaufmann und P. Uggowitzer: Computerunterstützte Vorhersage Mechanischer Kennwerte von A226. Gießerei 11 (2010), 42–49
Pucher, P., H. Antrekowitsch, H. Böttcher, H. Kaufmann and P. Uggowitzer: Influence of compositional variations on microstructural evolution, mechanical properties and fluidity of the secondary foundry alloy AlSi9Cu3. International Journal of Cast Metals Research 23 (2010), 375–383
Pucher, P.: Optimierung der mechanischen und gießtechnologischen Eigenschaften der Sekundärgusslegierung A226. Dissertation, Montanuniversität Leoben, 2011
Stadler, F., H. Antrekowitsch, W. Fragner, H. Kaufmann und P. Uggowitzer: Der Einfluss von Nickel auf die Warmfestigkeit von AlSi-Gusslegierungen. Gießerei (2011), in press
Stadler, F., H. Antrekowitsch, W. Fragner, H. Kaufmann and P. Uggowitzer: The effect of Ni on the high-temperature strength of Al-Si cast alloys. Materials Science Forum (2011), in press
Prillhofer, R., B. Prillhofer und H. Antrekowitsch: Verwertung von Reststoffen beim Aluminium-Recycling. BHM 153 (2008) 3, 2–7
Paulitsch, H. und S. Luidold: Aufarbeitung von Rückständen aus der Sekundäraluminiumindustrie. Forum für Metallurgie und Werkstofftechnik (2011), Leoben, Österreich
Schwalbe, M.: Entstehung und Aufbereitung von Krätzen und Schlacken in der Aluminiumherstellung und -verarbeitung. Vortrag (2010), Leoben, Österreich
Paulitsch, H., H. Antrekowitsch und A. Schmid: Vergleich des Abbrandverhaltens beim Rezyklieren von Aluminiumspänen und -briketts. BHM 156 (2011) 1, 6–13
Prillhofer, R., B. Prillhofer und H. Antrekowitsch: Einsatzmöglichkeit prozessbedingter Reststoffe beim Al-Recycling. Proc. of Depotech, Leoben, Österreich (2008), 231–236
Konetschnik, S.: Verwertungsstrategien für gefährliche nichteisenmetallhaltige Rückstände. Dissertation, Montanuniversität Leoben, 2010
Prillhofer, R., B. Prillhofer and H. Antrekowitsch: Treatment of residues during aluminium recycling. EPD Congress, San Francisco, USA (2009), 857–862
Wagner, C., H. Antrekowitsch und H. Schnideritsch: Reaktionsverhalten von Aluminium bei der Desoxidation in Abhängigkeit von Form und Herstellungsverfahren. Stahl und Eisen 130 (2010) 1, 39–45
Wagner, C., H. Antrekowitsch and H. Schnideritsch: Comparing and evaluating smelted and mechanically produced deoxidation aluminium with regard to minimising the oxygen content of molten steel. World of Metallurgy – Erzmetall 63 (2010) 1, 6–12
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Antrekowitsch, H., Koch, S., Paulitsch, H. et al. Recycling und Werkstoffentwicklung von Aluminium. Berg Huettenmaenn Monatsh 156, 287–294 (2011). https://doi.org/10.1007/s00501-011-0010-7
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s00501-011-0010-7