Skip to main content

Advertisement

SpringerLink
Log in

High-gain observer-based sensorless control of a flywheel energy storage system for integration with a grid-connected variable-speed wind generator

  • Methodologies and Application
  • Published:
Soft Computing Aims and scope Submit manuscript

Abstract

This paper introduces an induction machine-based flywheel energy storage system (FESS) for direct integration with a variable-speed wind generator (VSWG). The aim is to connect the FESS at the DC bus level of a permanent magnet synchronous generator-based VSWG in order to stabilize the DC bus voltage as well as the power flowing into the grid. A rotor flux-oriented control strategy is proposed for the FESS converter based on the actual speed of the flywheel rotor. Since mechanical speed sensors are prone to failure and increase the maintenance cost of the system, a sensorless technique is proposed to estimate the rotor speed through a specially synthesized high-gain observer (HGO). The proposed observer achieves accurate tracking of the flywheel speed and flux and reduces the adverse effects of variations in the rated rotor resistance. Simulation results obtained using the MATLAB-Simulink environment are presented to illustrate the theoretical synthesis and analysis of the proposed FOC and sensorless HGO control strategies.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19

Similar content being viewed by others

References

  • Ali D, Asim M, Wallam F, Qazi Z, Abbas A, Naudhani Y (2019) Experimental testing of observers comprising discrete Kalman filter and high-gain observers. In: International conference on computer engineering & mathematical and engineering technology (iCoMET), pp 1–5

  • Amranea A, Larabi A, Aitouche A (2018) Unknown input observer design for fault sensor estimation applied to induction machine. Math Comput Simul. https://doi.org/10.1016/j.matcom.2018.09.018

  • Arani AAK, Karami H, Gharehpetian GB, Hejazi MSA (2017) Review of flywheel energy storage systems structures and applications in power systems and microgrids. Renew Sustain Energy Rev 69:9–18

    Article  Google Scholar 

  • Bahloul M, Chrifi-Alaoui L, Dridd S, Souissi M, Chaabane M (2018) Robust sensorless vector control of an induction machine using multiobjective adaptive fuzzy Luenberger observer. ISA Trans 74:144–154

    Article  Google Scholar 

  • Beltran B, Benbouzid MEH, Ahmed-Ali T (2010) A combined high gain observer and high-order sliding mode controller for a DFIG-based wind turbine. In: IEEE international energy conference, pp 322–327

  • Besbes M, Hadj Saïd S, M’Sahli F (2015) FPGA implementation of high gain observer for induction machine using Simulink HDL coder. In: International conference on control, engineering & information technology

  • Blasco-Gimenez R, Asher GM, Cilia J, Bradley KJ (1996) Field weakening at high and low speed for sensorless vector controlled induction machine. In: Proceedings of the IEEE international conference on PEVD, pp 258–261

  • Boukettaya G, Krichen L (2014) A dynamic power management strategy of a grid connected hybrid generation system using wind, photovoltaic and Flywheel Energy Storage System in residential applications. Energy 71:148–159

    Article  Google Scholar 

  • Boumegoura T (2001) Electromagnetic signature detection of defects in an asynchronous machine and synthesis of observers for diagnosis, PhD thesis, l’école centrale de Lyon

  • Carnevale D, Possieri C, Tornambe A (2018) On over-sized high-gain practical observers for nonlinear systems. IEEE/CAA J Autom Sin 5(3):691–698

    Article  MathSciNet  Google Scholar 

  • Chen J, Yao W, Zhang CK, Ren Y, Jiang L (2019) Design of robust MPPT controller for grid-connected PMSG-based wind turbine via perturbation observation based nonlinear control. Renew Energy 134:478–495

    Article  Google Scholar 

  • Cimuca GO, Saudemont C, Robyns B, Radulescu MM (2006) Control and performance evaluation of a flywheel energy-storage system associated to a variable-speed wind generator. IEEE Trans Ind Electron 53(4):1074–1085

    Article  Google Scholar 

  • Debouza M, Al-Durra A, Errouissi R, Muyeen SM (2018) Direct power control for grid-connected doubly fed induction generator using disturbance observer based control. Renew Energy 125:365–372

    Article  Google Scholar 

  • Deng X, Yang J, Sun Y, Song D, Xiang XXG, Joo YH (2019) Sensorless effective wind speed estimation method based on unknown input disturbance observer and extreme learning machine. Energy 186:ID 115790

  • Dib A, Farza M, M’Saad M, Dorleans Ph, Massieu JF (2011) High gain observer for sensorless induction motor. In: International on federation of automatic control, Milano, Italy

  • Farza M, M’Saad M, Rossignol L (2004) Observer design for a class of MIMO nonlinear systems. Automatica 40:135–143

    Article  MathSciNet  Google Scholar 

  • Gao J, Cao S, Zhang S (2018) The neural network control approach for PMSM based on a high gain observer. In: Youth academic annual conference of Chinese Association of automation (YAC), pp 1066–1071

  • Ghanes M (2005) Observation and control of asynchronous machines without a mechanical sensor, PhD thesis, Université de Nantes

  • Ghosh S, Kamalasadan S (2017) An integrated dynamic modeling and adaptive controller approach for flywheel augmented DFIG based wind system. IEEE Trans Power Syst 32(3):2161–2171

    Article  Google Scholar 

  • Hamida MA, de Leon J, Glumineau A (2017) Experimental sensorless control for IPMSM by using integral backstepping strategy and adaptive high gain observer. Control Eng Pract 59:64–76

    Article  Google Scholar 

  • Hamzaoui I, Bouchafaa F, Talha A (2013) Comparative study between direct torque control and field-oriented control for induction machine used in flywheel energy storage system. J Electr Eng 13(7):1582–4594

    Google Scholar 

  • Hamzaoui I, Bouchafaa F, Talha A (2016) Advanced control for wind energy conversion systems with flywheel storage dedicated to improving the quality of energy. Int J Hydrog Energy 41:20832–20846

    Article  Google Scholar 

  • Hebner R, Beno J, Walls A (2002) Flywheel batteries come around again. IEEE Spectr 39(4):46–51

    Article  Google Scholar 

  • Holtz J (2002) Sensorless control induction motor drives. Proc IEEE 90(8):1359–1394

    Article  Google Scholar 

  • Lawrence RG, Craven KL, Nichols GD (2003) Flywheel UPS. IEEE Ind Appl Mag 9(3):44–50

    Article  Google Scholar 

  • Leclercq L, Ansel A, Robyns B (2003) Autonomous high power variable speed wind generator system. In: Proceedings of the EPE, Toulouse, France

  • Levi E, Wang M (1999) Main flux saturation compensation in sensorless vector controlled induction machines for operation in the field weakening region. In: Proceedings of the European power electronics conference

  • Liaquat M, Javaid MA, Saad M (2017) A nonlinear high-gain observer for n-link robot manipulator which has measurement noise in a feedback control framework. In: International conference on control automation and systems (ICCAS), pp 755–759

  • Liu R (2014) Sensorless speed estimation for long term flywheel energy storage system in standby mode. Ryerson University, Toronto MSC thesis

    Google Scholar 

  • Mansour M, Rachdi S, Mansouri MN, Mimouni MF (2012) Direct torque control strategy of an induction-machine-based flywheel energy storage system associated to a variable-speed wind generator. Energy Power Eng 4:255–263

    Article  Google Scholar 

  • Mansour M, Mansouri MN, Mimouni MF (2014) Modeling and control of IM-based flywheel energy-storage system associated to a variable-speed wind generator. In: 2nd International Conference on Renewable Energy (CIER’14), Monastir, Tunisia

  • Miladi N, Dimassi H, Hadj Said S, M’sahli F (2018) Robust state estimation of a quadrotor based on high-gain and sliding-mode observers. In: International multi-conference on systems, signals & devices, pp 1166–1171

  • Mousavi SM, Faraji F, Majazi A, Al-Haddad K (2017) A comprehensive review of flywheel energy storage system technology. Renew Sustain Energy Rev 67:477–490

    Article  Google Scholar 

  • Msaddek A, Gaaloul A, Msalhi F (2015) High gain observer based higher order sliding mode control: application to an induction motor. In: International multi-conference on systems, signals & devices

  • Nguyen TD, Tseng KJ, Zhang C, Zhang S, Nguyen HT (2010) Position sensorless control of a novel flywheel energy storage system, IPEC. Singapore, pp 1192–1198

  • Prasad AR, Natarajan E (2006) Optimisation of integrated photovoltaic-wind power generation systems with battery storage. Energy 31:1943–54

    Article  Google Scholar 

  • Rossignol L, Farza M, Saad MM (2003) Nonlinear observation strategies for induction motors. In: IEEE international of electric machines and drives conference Madison, Wisconsin, USA

  • Saudemont C, Robyns B, Cimuca G, Radulescu MM (2005) Grid connected or stand-alone real-time variable speed wind generator emulator associated to a flywheel energy storage system. In: Proceedings of the 11th European conference on power and electrical applications

  • Song J, Lee KB, Song JH, Choy I, Kim KB (2000) Sensorless vector control of induction motor using a novel reduced-order extended Luenberger observer. In: IEEE Industry Applications Conference, Italy

  • Suzuki Y, Koyanagi A, Kobayashi M, Shimada R (2005) Novel applications of the flywheel energy storage system. Energy 30:2128–43

    Article  Google Scholar 

  • Treangle C, Farza M, M’Saad M (2017) A simple filtered high gain observer for a class of uncertain nonlinear systems. In: International conference on science & technology automation control & computer engineering (STA), pp 396–401

  • Zhao H, Yao R, Xu L, Yuan Y, Li G, Deng W (2018) Study on a novel fault damage degree identification method using high-order differential mathematical morphology gradient spectrum entropy. Entropy 20(9):682

    Article  Google Scholar 

  • Zhao H, Zheng J, Xu J, Deng W (2019) Fault diagnosis method based on principal component analysis and broad learning system. IEEE Access 7:99263–99272

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Electrical Engineering Department, College of Engineering at Yanbu, Taibah University, Yanbu, Saudi Arabia

    M. Mansour & S. Bendoukha

  2. Research Unit of Industrial Systems Study and Renewable Energy, Electrical Engineering Department, National Engineering School of Monastir, University of Monastir, Avenue Ibn El Jazzar, 5019, Monastir, Tunisia

    M. Mansour, S. Hadj Saïd, M. N. Mansouri & M. F. Mimouni

  3. College of Computer Science and Engineering at Yanbu, Taibah University, Yanbu, Saudi Arabia

    W. Berrayana

Authors
  1. M. Mansour
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. Hadj Saïd
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. Bendoukha
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. W. Berrayana
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. M. N. Mansouri
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. M. F. Mimouni
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to S. Bendoukha.

Ethics declarations

Conflict of interest

The authors declare that they have no competing interests.

Ethical approval

This article does not contain any studies with human participants or animals performed by any of the authors.

Additional information

Communicated by V. Loia.

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Appendix: IM, flywheel, and DC bus parameters

Appendix: IM, flywheel, and DC bus parameters

  • Nominal power \(P_{n}=660\) kW.

  • Nominal voltage \(V_{n}=690\)V.

  • Nominal rotational speed \(N_{n}=1500\) rpm.

  • Number of pole pairs \(p=2\).

  • Stator resistance \(R_\mathrm{s}=14.6\) m\(\varOmega \).

  • Rotor resistance \(R_\mathrm{r}=23.8\) m\(\varOmega \).

  • Stator inductance \(L_\mathrm{s}=30.6\) mH.

  • Rotor inductance \(L_\mathrm{r}=30.3\) mH.

  • Mutual inductance \(M=29.9\) mH.

  • FESS inertia (Flywheel + IM) \(J_\mathrm{f}=1097.95\,\hbox {kg\,m}^{2}\).

  • Viscous friction coefficient \(f_\mathrm{f}=0.00646412\,\hbox {Nm\,rad\,s}^{-1}\).

  • DC bus voltage \(V_\mathrm{dc}=1500\) V.

  • Equivalent capacitance \(C=10\) mF.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Mansour, M., Hadj Saïd, S., Bendoukha, S. et al. High-gain observer-based sensorless control of a flywheel energy storage system for integration with a grid-connected variable-speed wind generator. Soft Comput 24, 10585–10596 (2020). https://doi.org/10.1007/s00500-019-04564-5

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00500-019-04564-5

Keywords

Search

Navigation