Abstract
We describe an immersed-boundary technique which is adopted from the direct-forcing method. A virtual force based on the rate of momentum changes of a solid body is added to the Navier–Stokes equations. The projection method is used to solve the Navier–Stokes equations. The second-order Adam–Bashford scheme is used for the temporal discretization while the diffusive and the convective terms are discretized using the second-order central difference and upwind schemes, respectively. Some benchmark problems for both stationary and moving solid object have been simulated to demonstrate the capability of the current method in handling fluid–solid interactions.
Similar content being viewed by others
References
Borthwick AGL (1986) Comparison between two finite difference schemes for computing the flow around a cylinder. Int J Numer Methods Fluids 6: 275–290
Chern MJ, Borthwick AGL, Taylor R (2005) Pseudospectral element model for free surface viscous flows. Int J Numer Methods Heat Fluid Flow 15: 517–554
Coutanceau M, Bouard R (1977) Experimental determination of the main features of the viscous flow in the wake of a circular cylinder in uniform translation. Part 1. Steady flow. J Fluid Mech 79: 231
Dennis SCR, Chang GZ (1970) Numerical solutions for steady flow past a circular cylinder at Reynolds numbers up to 100. J Fluid Mech 42: 471–489
Dias A, Majumdar S, Numerical computation of flow around a circular cylinder, Technical Report, PS II Report, BITS Pilani, India
Fadlun EA, Verzicco R, Orlandi P, Yusof JM (2000) Combined immersed-boundary finite-difference methods for three dimensional complex flow simulations. J Comput Phys 161: 35–60
Goldstein D, Handler R, Sirovich L (1993) Modeling an no-slip flow boundary with an external force field. J Comput Phys 105: 354–366
Goldstein D, Handler R, Sirovich L (1995) Direct numerical simulation of turbulent flow over a modelled riblet covered surface. J Comput Phys 302: 333
Hurlbut SE, Spaulding ML, White FM (1982) Numerical solution for laminar two dimensional flow about a cylinder oscillating in a uniform stream. Trans ASME J Fluids Eng 104: 214
Kalitzin G, Iaccarino G (2003) Toward immersed boundary simulation of high Reynolds number flows, Annual Research Briefs, Center for Turbulence Research, pp 369–378
Lai MC, Peskin CS (2000) An Immersed boundary method with formal second-order accuracy and reduced numerical viscosity. J Comput Phys 160: 705–719
Meneghini JR, Saltara F, Siqueira CLR, Ferrari J Jr (2001) A. Numerical simulation of flow in interference between two circular cylinders in tandem and side-by-side arrangements. J Fluids Struct 15: 327–350
Pan D (2006) An immersed boundary method on unstructured cartesian meshes for incompressible flow with heat transfer. Numer Heat Transf Part B 49: 277–297
Peskin CS (1972) Flow patterns around heart valves: a numerical method. J Comput Phys 10: 252–271
Rosenfeld M, Kwak P, Vinokur M (1991) Unsteady incompressible Navier–Stokes equations. J Comput Phys 94: 102–137
Saiki EM, Biringen S (1996) Numerical simulation of a cylinder in uniform flow: application of a virtual boundary method. J Comput Phys 123: 450–465
Su SW, Lai MC, Lin CA (2007) An immersed boundary technique for simulating complex flows with rigid boundary. Comput Fluids 36: 313–324
Tritton DJ (1959) Experiments on the flow past a circular cylinder at low Reynolds number. J Fluid Mech 6: 547
Tseng YH, Ferziger JH (2003) A ghost-cell immersed boundary method for flow in complex geometry. J Comput Phys 192: 593–623
Verzicco R, Yusof JM, Orlandi P, Haworth D (2000) Large eddy simulation in complex geometric configurations using boundary body forces. AIAA J 38(3): 427–433
Williamson CHK (1996) Vortex dynamic in the cylinder wake. Annu Rev Fluid Mech 28: 477
Ye T, Mittal R, Udaykumar HS, Shyy W (1993) An accurate Cartesian grid method for viscous incompressible flows with complex immersed boundaries. J Comput Phys 156: 209–240
Yusof JM (1996) Interaction of massive particles with turbulence. PhD dissertation, Department of Mechanical and Aerospace Engineering, Cornell University
Yusof JM (1997) Combined immersed-boundary/B-spline methods for simulations of flow in complex geometries, Annual Research Briefs, Center for Turbulence Research, pp 317–327
Zhang N, Zheng ZC (2007) An improved direct-forcing~immersed-boundary method for finite difference applications. J Comput Phys 221: 250–268
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
ESM1 (AVI 284 kb)
ESM2 (AVI 466 kb)
Rights and permissions
About this article
Cite this article
Noor, D.Z., Chern, MJ. & Horng, TL. An immersed boundary method to solve fluid–solid interaction problems. Comput Mech 44, 447–453 (2009). https://doi.org/10.1007/s00466-009-0384-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00466-009-0384-5