Skip to main content
Log in

Thermally-induced bending-torsion coupling vibration of large scale space structures

  • Original Paper
  • Published:
Computational Mechanics Aims and scope Submit manuscript

Abstract

In this paper, a finite element scheme is developed to solve the problem of thermally-induced bending-torsion coupling vibration of large scale space structures, which are usually composed of thin-walled beams with open and closed cross-section. A two-noded finite element is proposed to analyze the transient temperature field over the longitudinal and circumferential direction of a beam. Since this temperature element can share the same mesh with the two-noded beam element of Euler–Bernoulli type, a unified finite element scheme is easily formulated to solve the thermal-structural coupling problem. This scheme is characterized with very strong nonlinear formulation, due to the consideration of the thermal radiation and the coupling effect between structural deformations and the incident normal heat flux. Moreover, because the warping is taken into account, not only the thermal axial force and thermal bending moments but also the thermal bi-moment are presented in the formulation. Consequently, the thermally-induced bending-torsion coupling vibration can be simulated. The performance of the proposed computational scheme is illustrated by the analysis of the well-known failure of Hubble space telescope solar arrays. The results reveal that the thermally-induced bending-torsion coupling vibration is obviously presented in that case and could be regarded as a cause of failure.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Thornton EA, Paul DB (1985) Thermal-structure analysis of large space structures: an assessment of recent advances. J Spacecraft 22(4):385–393

    Google Scholar 

  2. Boley BA (1956) Thermally induced vibrations of beams. J Aeronaut Sci 23(2):179–181

    MATH  MathSciNet  Google Scholar 

  3. Boley BA, Barber AD (1956) Dynamic response of beams and plates to rapid heating. J Appl Mech 24(3):413–416

    MathSciNet  Google Scholar 

  4. Thornton EA, Kim YK (1993) Thermally induced bending vibrations of a flexible rolled-up solar array. J Spacecraft Rockets 30(4):438–448

    Google Scholar 

  5. Chung PW, Thornton EA (1995) Torsional buckling and vibrations of a flexible rolled-up solar array. AIAA Paper 95–1355-cp, pp.1654–1664

  6. Murozono M, Thornton EA (1998) Buckling and quasistatic thermal-structural response of asymmetric rolled-up solar array. J Spacecraft Rockets 35(2):147–155

    Article  Google Scholar 

  7. Namburu RR, Tamma KK (1991) Thermally-induced structural dynamic response of flexural configurations influenced by linear/non-linear thermal effects. AIAA Paper 91–1175-cp, 2667–2676

  8. Tamma KK, Namburu RR (1991) Unified transient analysis formulations for interdisciplinary thermal-structural problems. In:Proceedings of the 6th International Conference numerical methods. Thermal problems, Stanford

  9. Chen XQ, Mohan RV, Tamma KK (1994) Instantaneous response of elastic thin-walled structures to rapid heating. Int J Numer Methods Eng 37(14):2389–2408

    Article  MATH  Google Scholar 

  10. Ko KE, Kim JH (2003) Thermally induced vibrations of spinning thin-walled composite beam. AIAA J 41(2): 296–303

    MathSciNet  Google Scholar 

  11. Rand O, Givoli D (1992) Thermal analysis of space trusses including three-dimensional effects. Inte Jo Numer Methods Heat Fluid Flow 2:115–125

    Google Scholar 

  12. Givoli D, Rand O (1993) Harmonic finite element thermo-elastic analysis of space frames and Trusses. J Thermal Stresses 16(3):233–248

    Google Scholar 

  13. Xue MD, Ding Y (2004) Two kinds of tube elements for transient thermal-structural analysis of large space structures. Int J Numer Methods Eng 59(10):1335–1353

    Article  MATH  Google Scholar 

  14. Ding Y, Xue MD, Kim JK (2005) Thermo-structural analysis of space structures using Fourier tube elements. Comput Mech 36(4):289–297

    Article  MATH  Google Scholar 

  15. Johnston JD, Thornton EA (1998) Thermally induced attitude dynamics of a spacecraft with a flexible appendage. J Guidance Control Dyn 21(4):581–587

    Google Scholar 

  16. Wang XC (2003) Finite element method (in Chinese). Tsinghua University Press, Beijing pp.475–476

    Google Scholar 

  17. Mauro S, Filip C (2001) Filippou. Non-linear spatial Timoshenko beam elementwith curvature interpolation. Int J Numer Methods Eng 50:761–785

    Article  MATH  Google Scholar 

  18. Hwang KC, Xue MD and Lu MW (2003) Tensor analysis (in Chinese) 2nd edn. Tsinghua University Press, Beijing 129

  19. Gjelsvik A (1981) The theory of thin walled bars. Wiley, New York

    MATH  Google Scholar 

  20. Vlasov VZ (1961) Thin walled elastic beams. Israel Program for Scientific Translation, Jerusalem

  21. Sapountzakis EJ (2000) Solution of nonuniform torsion of bars by an integral equation method. Comput Struct 77:659–667

    Article  Google Scholar 

  22. Sapountzakis EJ, Mokos VG (2001) Nonuniform torsion of composite bars by boundary element method. J Eng Mech ASCE 127(9):945–953

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Ming-De Xue.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Xue, MD., Duan, J. & Xiang, ZH. Thermally-induced bending-torsion coupling vibration of large scale space structures. Comput Mech 40, 707–723 (2007). https://doi.org/10.1007/s00466-006-0134-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00466-006-0134-x

Keywords

Navigation